Used tester in Taiwan

Digital Rockwell Hardness Tester Confirm to GB/T230.2, JJS Z2245, EN-ISO6508, ASTME-18 Standard

Applications: Hard alloy / Surface hardened steel / Copper alloy / Carburized steel / Hard cast steel / Malleable casting / Annealed steel / Hardened steel /Aluminum alloy / Soft steel / Bearing steel Features: ●...

Portable Hydrostatic Head Tester

• Manufacturer: cometech testing machines

QC-317M(N) Portable design and without electricity that can proceed with test. No time and space limitations, mainly used on the spot measurement, inspect textile water-resistance ability. The test method is divi...

Optical Film Abrasion Tester

WD-M013 is mainly use in light load friction test. Specimen placed on a movable platform, abrasion head is designed to be able to zero setting of original load and test load can be set to 50-2000g. Light friction...

Surftest SJ-310 Series 178-Portable Surface Roughness Tester

SPC output cable: 1m 936937 / 2m 965014inch/mm switch

Surftest SJ-210- Series 178- Portable Surface Roughness Tester

SPC output cable: 1m 936937 / 2m 965014

Full-Auto Rockwell Hardness Tester Confirm to GB/T230.2, JJS Z2245, EN-ISO6508, ASTME-18 Standard

Applications: Hard alloy / Surface hardened steel / Copper alloy / Carburized steel / Hard cast steel / Malleable casting / Annealed steel / Hardened steel /Aluminum alloy / Soft steel / Bearing steel Features: ●...

C-type Hardness Tester Confirm to JIS S6050 Standard

Hardness tester is suitable for soft material such as nonmetal. Applying the specified force on the standard material plate, and the hardness of the material can be obtained by reading the values on the pointer. ...

Micro Computer Pivot Shaft Clearance Tester

JTM-UTS510A Microcomputer Servo Universal Material Testing Machine (10T) JTM-UTS2000 Microcomputer Servo Universal Material Testing Machine (20T) JTM-UTS1000 Microcomputer Servo Universal Material Testing Machine...

QT-010 Manual Torque Tester

• Manufacturer: cometech testing machines

Model QT-010 is used for testing the Torsion of cap product. It can test the both direction of clockwise and counter-clockwise torsion. The clamping way is using adjustable fixture and quick drilling screw. It ca...

Water Penetration Tester Confirm to AATCC127, JIS-L1092, ISO811 Standard

• Manufacturer: cometech testing machines

QC-317A can add water pressure in constant rate on tarpaulin, when water drop penetrate from tarpaulin, at this moment the pressure is hydrostatic pressure characteristic of tarpaulin. Water pressure method: Wate...

Coefficient of Friction Tester, Motor Coefficient of Friction Tester Confirm to TAPPI T-815, ASTM D202 Standard

• Manufacturer: cometech testing machines

QC-117 & QC-117A Put specimen on the platform, and then put dead weight on the top of specimen according to standard requirement. Let platform angle goes up until the deadweight slides down. Get the tan value fro...

Manual Drop Dart Impact Tester Confirm to ASTM D1709 GB-9639 Standard

• Manufacturer: cometech testing machines

This tester conforms to test standard applicable for method A and method B. Clamp the plastic film on a round specimen holder (dia. 127mm). The impact head used in method A is dia. 38.1mm and in method B is dia. ...

QC-622H Surface Hardness Abrasion Tester

Surface Hardness Abrasion Tester is for measuring surface treatment such as painting, plating, coating, dyeing and finishing the design of the machine. It can use cotton, sand paper, steel wool and eraser to test...

Stiffness Tester Confirm to JIS-L1096 Standard

• Manufacturer: cometech testing machines

QC-321 mainly used to test the Soft –Hard and stiffness of textile. Hang the 25cm x width 2 cm bar shape specimen on suspension bar, wait a specific time, the specimen will droop or remain original shape due to m...

Adhesion/Release Tester Confirm to FINAT 4 Standard

• Manufacturer: cometech testing machines

QC-527 test range can do low and high speed peel test and also for 90 ° 、180° multi-angle peel test. Low speed peeling force generally uses 300mm/min to proceed with test, testlow-stick adhesive label tear force....