Used Materials Testing in Germany

+GF+ - GEORG FISCHER SPRA
- Manufacturer: Georg Fischer
- Model: SPRA
Test specimen cylinder bushes, ram base, ejector, reading scale
Meinerzhagen, Germany
+GF+ - GEORG FISCHER PCR
- Manufacturer: Georg Fischer
Manual drive, electrically heated, 220 V, temperature regulation up to 300°C, for determining the tensile strength (up to 400 N/cm²) of hot-hardening molding materials
Meinerzhagen, Germany
+GF+ - GEORG FISCHER SPCR
- Manufacturer: Georg Fischer
Manual drive, electrically heated, 220 V, temperature regulation up to 300°C, for determining the tensile strength (up to 400 N/cm²) of hot-hardening molding materials
Meinerzhagen, Germany
2004 YXLON International GmbH MU 2000 XL
- Manufacturer: Yxlon
Protective cabin, parts manipulator, turntable with three-jaw chuck, control panel with visualization, image intensifier, CRT screen, COMET X-ray tube (2004) MXR-225/0.2, 225 kV, workpiece max. Ø 800 x 1500 mm / ...
Meinerzhagen, Germany
+GF+ - GEORG FISCHER PVP
- Manufacturer: Georg Fischer
Battery-operated measuring instrument with digital display for determining the indentation resistance [N/m²] as a measure of the mold compaction of test specimens and molds made of green sand
Meinerzhagen, Germany
+GF+ - GEORG FISCHER PNZ
- Manufacturer: Georg Fischer
electric heating plate, power consumption 445 W, timer, test specimen tube, test specimen ring, ram base set
Meinerzhagen, Germany
HARTIP 1900
Product information "HARTIP 1900" Hartip 1900 hardness tester (rebound hardness test) Operating instructions.
$2,054 USD
Münster, Germany
BNIF plates
Product information "BNIF Plates" Reference plates for testing surface roughness according to EN 1370 The 25 plates, each measuring 110 x 160 mm, are supplied in a case.
$1,261 USD
Münster, Germany
+GF+ - GEORG FISCHER SPRA
- Manufacturer: Georg Fischer
- Model: SPRA
Test specimen cylinder bushing, ram base, ejector, reading scale
Meinerzhagen, Germany
Scrata Plates - 48 pieces -
Product information "Scrata Plates - 48 pieces -" Comparison plates for testing surface quality according to DIN EN 1370 The set consists of the following: - Surface roughness (1-5) - Surface inclusions (1-5) - G...
$3,667 USD
Münster, Germany
Illuminator, Allen-Vanguard VIP 5
- Manufacturer: Allen
Product information "Illuminator, Allen-Vanguard VIP 5" Illuminators, Allen-Vanguard - Small Illuminator, 3.0 and 14.0 mm Series - Illuminator (3 mm/length 75 mm) & SP - 14 mm clip for mirror system - Probes (1 x...
$800 USD
Münster, Germany
Illuminator, Allen-Vanguard VIP 3
- Manufacturer: Allen
Product information "Illuminator, Allen-Vanguard VIP 3" Illuminator, Allen-Vanguard VIP 3 - Small Illuminator LP 3/75 (3.0 mm x 75 mm), - Mirror clamp (3 mm/length 75 mm), - 1 x spare 3 W bulb - Case with foam cu...
$551 USD
Münster, Germany
Slip cross magnet 42 volts
Product information "Helling Cross Magnet 42 Volt" Helling Cross Magnet on rollers, completely overhauled // - recast - Ideal testing device for simultaneous longitudinal and transverse defect testing! Requires K...
$1,168 USD
Münster, Germany
Illuminator, Allen-Vanguard VIP 2
- Manufacturer: Allen
Product information "Illuminator, Allen-Vanguard VIP 2" Illuminator, Allen-Vanguard VIP 2 - Small Illuminator LP 2/75 (2.0 mm x 75 mm) - Mirror clamp (2.0 mm/length 75 mm) - 1 x Spare 2 W bulb - Case with foam cu...
$539 USD
Münster, Germany
JANKE & KUNKEL IKAMAG RH
- Manufacturer: Janke & Kunkel
Heating plate, adjustable temperature and stirring frequency, 415 W, 230 V, 50 Hz, 20 - 2,000 rpm.
Meinerzhagen, Germany