Used Materials Testing in Belgium

2000 Double samples polisher STRUERS

• Manufacturer: Struers
• Model: LaboPol

Suitable for wet grinding Dimensions: Length: 700mm; Width: 690mm; Height: 220mm Ø disc 245mm; 2 discs 1 speed

Hardnesstester WOLPERT DIA TESTOR 2RC

Type : DIA TESTOR 2RC, serial no. : 3354 In good conditions With a lot of special accessories weight +- 200 kg

Sand strength tester SIMPSON

• Manufacturer: Simpson

Dimensions: Length: 250mm; Width: 450mm; Height: 320mm 110/220V, 1 phase, 50Hz, 2A Suitable for: With accessories for shear strength

Samples polishing unit 1 disc

• Manufacturer: Struers

Dimensions: length: 720mm, width: 480mm; height: 400mm Adjustable up to 1500 rpm by speed regulator

Double samples polisher STRUERS

• Manufacturer: Struers

For wet sanding Dimensions: Length: 730mm; width: 685mm; height: 200mm Ø Plate 230mm; 2 plates

Electronic scratch hardness tester GF

• Manufacturer: GF

This instrument is used to determine the scratch hardness of a mould or core. The instrument contains an eight-point cutter which, when rotated, penetrates a finished core or mould surface. The depth of penetrati...

Impact hardnesstester ERNST

• Manufacturer: Ernst

Dimensions of box: Lenght: 240mm; Width: 110mm; Hight: 60mm Hardnesstester for mobile mesurements in wooden box

Mobile laboratory hand grinder STRUERS Transpol 2

• Manufacturer: Struers
• Model: Transpol-2

220V in black box with different heads and grinding disc with continous (stepless) speed regulation

Hardness tester WOLPERT ISSERSTEDT DIA 3b

Com N° 374 Dimensions: width 900 mm, depth 1200 mm, height (with pallet) 1800 mm With ground glass screen and ruler Ball Ø 10 mm With engine and base

Ball hand hardness tester POLDI, in wooden box

With magnifying glass and caliber Weight: ± 2 kg | Dimensions: length 175 mm, width 75 mm, hauteur 50 mm

Hardness tester REICHERTER AUTOMATION 3000 D

Type: BRIVISKOP 3000FD, serial number: 1.609.015.028 With HB ball, Ø 5 mm, capacity 750 kg Reading on disk With adjustable ruler Height and depth adjustement by switch pressing With emergency stop With control b...

Hardness tester WOLPERT/TESTWELL, Ø 10 mm, 3000 kg

Type: Tester 3B, serial number: 1902 Motor SIEMENS-SCHUCKERT; 0,4 kW; 1380 rpm; 220/380 V Table Ø 240 mm, adjustable by motor and by hand Ball Ø 10 mm Old model, very robust, with focusing screen and mobile strai...

Automatic hardness tester EMCOTEST

• Manufacturer: Emco

Type: T40.01, Serial number: 1.73.24 Motor ELIN, 220/380 V, 910 rpm, 1,41 / 0,82 A On table with electric motor

Polisher grinder MECAPOL STRUERS, Ø 200mm

• Manufacturer: Struers

220 V mono, 125 W With cover, polishing under water, with spare discs

Polisher grinder STRUERS Ø300mm

• Manufacturer: Struers

Dimensions: Length: 510mm; Width: 700mm; Height: 450mm 200/240V; 50/60Hz With water injection