Used Automatic Lathes

B0205-III

Maximum bar diameter: 20 mm (0.79”) | Maximum machining length: 210 mm (8.26”) With guide bushing/45 mm (1.77”) without | Main spindle speed: 200” 10,000 rpm | Secondary spindle speed: 200” 12,000 rpm | Live too...

B0385-II

Maximum bar diameter: 38 mm (1.5”) | Maximum machining length: 250 mm (9.84”) With guide bushing /250 mm (9.84”) without | Main spindle speed: 200” 6,000 rpm | Secondary spindle speed: 200” 7,000 rpm | Live tool...

SS327-5AX

Maximum bar diameter: 32 mm (1.25”) | Maximum machining length: 320 mm (12.59”) With guide bushing /70 mm (2.74”) without | Main spindle speed: 200” 8,000 rpm | Secondary spindle speed: 200” 8,000 rpm | Live too...

B0126-III

Maximum bar diameter: 12 mm (0.5”) | Maximum machining length: 210 mm (8.26”) With guide bushing /45 mm (1.77”) without | Main spindle speed: 200” 12,000 rpm | Secondary spindle speed: 200” 12,000 rpm | Live too...

B0125-III

Maximum bar diameter: 12 mm (0.5”) | Maximum machining length: 210 mm (8.26”) With guide bushing /45 mm (1.77”) without | Main spindle speed: 200” 12,000 rpm | Secondary spindle speed: 200” 12,000 rpm | Live too...

B0204-II

Maximum bar diameter: 20 mm | Maximum machining length: 170 mm (6.69”) With guide bushing /45 mm (1.77”) without | Main spindle speed: 200” 10,000 rpm | Secondary spindle speed: 200” 12,000 rpm | Live tool speed...

B0203-II

Maximum bar diameter: 20 mm | Maximum machining length: 170 mm (6.69”) With guide bushing /45 mm (1.77”) without | Main spindle speed: 200” 10,000 rpm | Secondary spindle speed: - | Live tool speed: 5,000 rpm

B075-III

Maximum bar diameter: 7mm | Maximum machining length: 170 mm (6.69”)With guide bushing /45 mm (1.77”) without | Main spindle speed: 200” 15,000 rpm | Secondary spindle speed: 200” 12,000 rpm | Live tool speed: -

BW129Z

Maximum bar diameter: 12.7 mm (0.45”) | Maximum machining length: 210 mm (8.27”) With guide bushing /45 mm (1.77”) without | Main spindle speed: 200” 12,000 rpm | Secondary spindle speed: 200” 12,000 rpm | Live ...

B0123-II

Maximum bar diameter: 12 mm (0.5”) | Maximum machining length: 210 mm (8.26”) With guide bushing /45 mm (1.77”) without | Main spindle speed: 200” 12,000 rpm | Secondary spindle speed: - | Live tool speed: 8,000...

B0206-III

Maximum bar diameter: 20 mm (0.79”) | Maximum machining length: 210 mm (8.26”) With guide bushing /45 mm (1.77”) without | Main spindle speed: 200” 10,000 rpm | Secondary spindle speed: 200” 12,000 rpm | Live to...

B0326-II

Maximum bar diameter: 32 mm (1.26”) | Maximum machining length: 320 mm (12.6”) With guide bushing/70 mm (2.76”) without | Main spindle speed: 200” 8,000 RPM | Secondary spindle speed: 200” 8,000 RPM | Live tool ...

B0325B-II

Maximum bar diameter: 32 mm (1.26”) | Maximum machining length: 320 mm (12.6”) With guide bushing /70 mm (2.75”) Without | Main spindle speed: 200” 8,000 rpm" | Secondary spindle speed: 200” 8,000 rpm" | Live to...

B0386-III

Maximum bar diameter: 38 mm (1.5”) Guide Bushing Mode / 42 mm (1.65”) Chucker Mode | Maximum machining length: 320 mm (12.6”)With guide bushing /70 mm / (2.75”) without | Main spindle speed: 200” 6,000 rpm | Sec...

Acme Gridley Water Soluble Headstock Carrier Seal & Lubrication Conversion

• Manufacturer: Acme Gridley

In these modern times, it becomes necessary to use water soluble coolant. This carrier and spindle seal upgrade makes that possible now on an Acme! With this upgrade, run at high speeds and save on coolant costs,...