Used Test Generators in Florida, USA

Keysight / Agilent / HP 83630B

• Manufacturer: Agilent - Keysight
• Model: 83630B

+13 dBm calibrated output power -50 dBc harmonics <26.5 GHz typical SSB phase noise <-80 dBc at 10 GHz and 10 kHz offset Complete analog sweeper 1 Hz frequency resolution (Option 008) Pulse, amplitude and frequen...

Keysight / Agilent / HP 83640B

• Manufacturer: Agilent - Keysight
• Model: 83640B

+10 dBm calibrated output power -50 dBc harmonics <26.5 GHz typical SSB phase noise <-80 dBc at 10 GHz and 10 kHz offset Complete analog sweeper 1 Hz frequency resolution (Option 008) Pulse, amplitude and frequen...

Keysight / Agilent / HP 83622A

• Manufacturer: Agilent - Keysight
• Model: 83622A

Scan modulation to simulate antenna scan patterns Accurate fixed and swept frequency offset for two-tone measurement User flatness correction for leveling at remote points in the test system General purpose sourc...

Wiltron 6640A

• Manufacturer: Wiltron
• Model: 6640A

Internally leveled Maximum Output is >1 mW. Various sweep modes are possible. For example full sweep, sweeps from F1 to F2, sweeps from marker 1 to marker 2 and Delta-F. CW operation as well. Frequency resolution...

Keysight / Agilent / HP 8662A

• Manufacturer: Agilent - Keysight
• Model: 8662A

< -147 dBc/Hz SSB phase noise at 10 kHz offset 0.1 Hz frequency resolution Internal variable modulation oscillator Optional MATE capability Minimum Single-Side-Band Noise -148 dBc/Hz Maximum Single-Side-Band Nois...

Keysight / Agilent / HP 3310B

• Manufacturer: Agilent - Keysight
• Model: 3310B

The Agilent 3310B has all the features of the standard 3310A plus single and multiple cycle output capability. Start/Stop Phase can be adjusted over a range of approximately ±90º. A fast rise time sync output is ...

PNG7109A

Type N, BNC, or SMA connectors available 127 dB attenuation in 1 dB, or optional 0.1 dB steps Summing input for CNR, or Eb/No measurements 0 dB signal path insertion loss +/- 0.25 dB per 40 MHz noise band smoothi...

PNG7110A

Type N, BNC, or SMA connectors available 127 dB attenuation in 1 dB, or optional 0.1 dB steps Summing input for CNR, or Eb/No measurements 0 dB signal path insertion loss +/- 0.25 dB per 40 MHz noise band smoothi...

GW Instek SFG-2104

• Manufacturer: GW Instek
• Model: SFG-2104

DDS Technology and FPGA Chip Design Frequency Range:0.1Hz - 4MHz High Frequency Accuracy : ± 20ppm High Frequency Stability : ± 20ppm Frequency Resolution :100mHz Low Distortion Sine Wave:-55dBc,0.1Hz~200kHz Fro...

Keysight / Agilent / HP E4428C-506

• Manufacturer: Agilent - Keysight
• Model: E4428C-506

Covers the entire cellular, ISM (2.4 & 5.8 GHz), and UNII frequency bands Stand high stability OCXO time base reference reduces frequency drift resulting in improved frequency accuracy Excellent standard phase n...

Rohde & Schwarz SME03

• Manufacturer: Rohde & Schwarz
• Model: SME03

5 kHz to 3 GHz Leveled output -144 to +13 dBm 0.1 Hz resloution <1 x10 -9 /day high stability reference option All common digital modulation modes provided in one unit Great ease of operation thanks to a novel me...

Anritsu 68177C

• Manufacturer: Anritsu
• Model: 68177C

Broad frequency coverage including 0.1 Hz to 65 GHz in a single coax output Ultra-low SSB phase noise and spurious +17 dBm guaranteed leveled power to 20 GHz 0.1 Hz optional frequency resolution <5 ms switching t...

Wavetek 278

• Manufacturer: Wavetek
• Model: 278

Waveforms: sine, triangle, square, pulse, and external width controlled waveforms from 0.01 to 10 Vp-p, and dc offsets within a -5 to +5V range into 50-ohms. Waveforms can be continuous, gated or triggered. Frequ...

Wavetek 21

• Manufacturer: Wavetek
• Model: 21

Stabilization extends tight short-term specs (0.09% of range) to indefinite periods throughout the entire frequency range 100µHz to 11MHz frequency range in 9 ranges Waveforms below 1.1kHz are synthesized digital...

PNG7107A

Type N, BNC, or SMA connectors available 127 dB attenuation in 1 dB, or optional 0.1 dB steps Summing input for CNR, or Eb/No measurements 0 dB signal path insertion loss +/- 0.25 dB per 40 MHz noise band smoothi...