Used Heat Exchangers in China

Oil Cooler

Product Description Definition of Plate Heat Exchanger? The heat exchanger is one of the essential parts of a heating or air conditioning system. Without it, there is no heat exchange between fluids and therefore...

PHE System Unit

PHE System Unit Introduction Plate Heat Exchanger Unit is a complete set of heat exchange equipment, which focuses on plate heat exchanger with other operating parts, such as pumps, valves, pipes, PLC controling ...

Plate Condenser For AHU System Energy Recovery

With epoxy-coated aluminum plate pack as heat transfer core, Plate Condenser is suitable for air dehumidify, especially under wide temperature difference and high humidity places. Material Selection Plate: Pure a...

Plate Water Chiller

Plate water chiller has been widely used in dairy farms in many regions. It is not only economical in price, but also has good heat exchange effect and is easy to clean. The internal channels and interfaces are m...

Air Cooler

Product Description Finned radiator is the most widely used heat transfer equipment in gas and liquid heat exchanger. It can enhance heat transfer by adding fins to common base tubes. The base pipe can be steel p...

Air Condenser

Air condenser uses a lightweight construction that uses a special silicone free connection to the tube plate. This type of heat exchanger is perfect for medium-low temperature applications with temperatures up to...

AIR HEATER IN SPRAY DRAYER SYSTEM

Air Heater In Spray Drying Process Spray drying is to spray a solution, slurry or suspension into hot air. During the droplet's descent, water is quickly vaporized to achieve the purpose of drying, thereby obtain...

Plate Type Condenser

Product Introduction Our plate type condensers optimize heat transfer from one gas or liquid heat to the other medium by maximizing the effective area of the plate. High efficiency and outstanding reliability in ...

Steam Heater

Product Description Finned tube air heat exchanger Thus the economy and operation reliability of heat exchange equipment are improved. High frequency welded finned tube is wrapped with steel strip at the same tim...

Corrugated Fin Type Radiator Core

• Manufacturer: Radiator Supply House

Product Description: The main feature is to form corrugated fins on the metal plate to increase the contact area with the fluid (such as water or air), thereby improving the heat transfer efficiency. This design ...

Bphe Evaporator

BPHE evaporator The brazed type is designed for chemical cleaning can be carried out without disassembly. In most cases, the arrangement of the flow channels enables the inlet and outlet of the thermoelectric med...

Brazed PHE

Brazed plate heat exchanger is made of many stamped corrugated thin plates at a certain interval, sealed with gaskets around them, and laminated and compressed by a frame and a compression screw. The four corner ...

BPHE Brazed Plate Condenser

As an important part in a refrigerant loop, Brazed Plate Condenser exchanges heat between refrigerant and water. The refrigerant/gas is being cooled down, and transfers its heat to the water, for the purpose of d...

WATER WATER HEATER WITH GASKETED PLATE

Our fabrication is strictly followed by national standard NB/T 47004-2017 Plate heat exchanger and ISO Standard ISO 9001:2015, from sourcing of raw rubber and plate sheet, pressing and shaping of gasket and plate...

Phe Factory

Plate heat exchanger is used for cold and heat exchange, so that the need for heating or cooling medium can be heat exchange. In food industry, by exchanging heat and cold, the food is heated, cooled and sterili...