- Trusted Seller
Dreher 2008 Dreher Ft4/10mfd Finisher
used
- Manufacturer: Dreher
1.5 Kw, Made In Germany Name: 2008 Dreher Ft4/10mfd Finisher | Arrival date: 01-16-2025 | Dimensions l x w x h (inches): 30 x 25 x 65 | Capacity: 6 1/2" | Electrical: 230 V | Weight (lb.): 296 | Available quantit...
$449 USDEuclid, OH - Trusted Seller
Dreher 42/65 GFS #12464
refurbished
- Manufacturer: Dreher
5-knife rotor 2 rows of stator knives Cross section approx. 420 x 650 mm
Zuzenhausen, Germany - Trusted Seller
Dreher S 26/26 EV #11415
refurbished
- Manufacturer: Dreher
3-Rotorknives, 2 rows of Statorknives Cross section ca. 260 x 260 mm Drive 5, kW Granulator with rollerfeeder.
Zuzenhausen, Germany - Trusted Seller
Dreher S26/41 VSB #13110
used
- Manufacturer: Dreher
Cross section approx. 400 x 340 mm Use: Plastic; Wood | Rotor diameter: 260 mm | Rotor width: 400 mm | Rotor knives: 3 | Stator knives: row 2 | Motor drive: 11 kW
Zuzenhausen, Germany - Trusted Seller
Dreher S 34/52 #12768
used
- Manufacturer: Dreher
4-knife rotor 2 rows of stator knives Cross section approx. 340 x 520 mm
Zuzenhausen, Germany - Trusted Seller
Dreher S26/82 GFS-RS #13222
used
- Manufacturer: Dreher
Cross section approx. 820 x 260 mm Use: Plastic; Other | Rotor diameter: 260 mm | Rotor width: 820 mm | Rotor knives: 5 Reihen je 2 Messer | Stator knives: row 2 Reihen je 2 Messer | Motor drive: 18,5 kW
Zuzenhausen, Germany - Trusted Seller
Dreher S 26/41 VS #12139
used
- Manufacturer: Dreher
3-knife rotor 2 rows of stator knives Cross section approx. 400 x 500 mm
Zuzenhausen, Germany - Trusted Seller
Dreher S 34/41 VS #11375
used
- Manufacturer: Dreher
Rotordiameter: 340 mm Rotorwidth: 410 mm 3-Rotorknives, 2 rows of Statorknives Cross section ca. 340 x 410 mm Granulator with integrated soundproofing. For recycling of plastics alongside extruding lines, blow a...
Zuzenhausen, Germany - Trusted Seller
Dreher S 34/52 GFS #11648
refurbished
- Manufacturer: Dreher
Rolleneinzug am Trichter Power: 30 kW | Use: Plastic; Wood; Other | Rotor-messerreihe: 3 | Stator-messerreihe: 2 | Rotorbreite: 520 mm | Rotor ø: 340 mm | Einlaufabmessungen: 500 x 350 mm
Zuzenhausen, Germany - Trusted Seller
Dreher S 60/65 SRV GF #13072
refurbished
- Manufacturer: Dreher
Einlaufquerschnitt ca. 650×600 mm Use: Plastic; Wood; Other | Rotordurchmesser: 600 mm | Rotorbreite: 650 mm | Rotormesserreihen: 8 | Statormesserreihen: 3 | Antriebsmotor: 75 kW
Zuzenhausen, Germany 
Dreher S26/26
used
- Manufacturer: Dreher
This granulator is in great working condition. It can granulate most types of plastic, copper, rubber, etc. It has had new start/stop electricals installed. SPECS
$3,602 USDCampbellfield, Australia
Dreher INDUSTRIAL PLASTIC GRANULATOR
used
- Manufacturer: Dreher
This granulator is in great working condition. It can granulate most types of plastic, copper, rubber, etc. SPECS MEASUREMENTS
$3,602 USDCampbellfield, Australia
1982 DREHER Rapid Air H-4
used
- Manufacturer: Dreher
Material width: 203 mm | Material thickness: 0,1 - 1,9 mm | Feeding force: 450 N | Clamping force of moving pincer: 2250 N | Clamping force of fastening pincer: 650 N | Feed lenght: 0 - 101 mm | Weight of feeder...
Eislingen, Germany
1995 DREHER WAV-RDS-2Z Modell 1082 B
used
- Manufacturer: Dreher
Material width: 310 mm | Material thickness: 0,2 - 3,0 mm | Diameter of rolls: 80 mm | Feed lenght: 0 - 9999,9 mm | Speed: 80 m/min | Power requirement: 3,0 kW | Weight of feeder: 0.45 t | Dimensions of feeder (...
Eislingen, Germany
1983 DREHER WAV-RGL-2E Modell 500/2
used
- Manufacturer: Dreher
Material width: 500 mm | Material thickness: 0,2 - 3,8 mm | Material thickness / at material wicth: 3,8 / 330 mm | Material cross-cut: 1280 mm | Feed lenght: 0 - 9999,9 mm | Speed: 60 m/min | Power requirement: ...
Eislingen, Germany
Tip: Enter manufacturer, model or keyword