Building Filters
- Trusted Seller
Dreher SG 10
- Manufacturer: Dreher
Dreher strand granulator SG-10. Material steel. Rotor width 100mm. 10 strands. Capacity max 150kg/h. In soundproof cabinet. Control cabinet. With fan. No warranty.
Burladingen, Germany - Trusted SellerAuction
Platinenbeladeeinheit Dreher
- Manufacturer: Dreher
2 Hubtische, 2.200 x 2.200 mm, 2 Roboter, Fabr. Kuka, Robotersteuerung, Handprogrammierterminal, 3 Gurtförderbänder, B 800 mm, Reinigungsstation, Fabr. Wandres, Ölabscheider, Fabr. Camfil, Typ KSS Abscheider, Bj....
Uhingen, GermanyVisit Auction Website - Trusted Seller
Dreher S 34/52 #12768
- Manufacturer: Dreher
4-knife rotor 2 rows of stator knives Cross section approx. 340 x 520 mm
Zuzenhausen, Germany - Trusted Seller
Dreher S 26/26 EV #11415
- Manufacturer: Dreher
3-Rotorknives, 2 rows of Statorknives Cross section ca. 260 x 260 mm Drive 5, kW Granulator with rollerfeeder.
Zuzenhausen, Germany - Trusted Seller
Dreher 42/65 GFS #12464
- Manufacturer: Dreher
5-knife rotor 2 rows of stator knives Cross section approx. 420 x 650 mm
Zuzenhausen, Germany - Trusted Seller
Dreher S26/41 VSB #13110
- Manufacturer: Dreher
Cross section approx. 400 x 340 mm Use: Plastic; Wood | Rotor diameter: 260 mm | Rotor width: 400 mm | Rotor knives: 3 | Stator knives: row 2 | Motor drive: 11 kW
Zuzenhausen, Germany - Trusted Seller
Dreher S 34/52 GFS #11648
- Manufacturer: Dreher
Rolleneinzug am Trichter Power: 30 kW | Use: Plastic; Wood; Other | Rotor-messerreihe: 3 | Stator-messerreihe: 2 | Rotorbreite: 520 mm | Rotor ø: 340 mm | Einlaufabmessungen: 500 x 350 mm
Zuzenhausen, Germany - Trusted Seller
Dreher S 26/41 VS #12139
- Manufacturer: Dreher
3-knife rotor 2 rows of stator knives Cross section approx. 400 x 500 mm
Zuzenhausen, Germany - Trusted Seller
1994 DREHER 2372 D-FPS
- Manufacturer: Dreher
Feeding lines Decoiler Coil weight: 2 x 2 ton | Material width: 40 - 500 mm | Coil exterior diameter: 1.300 - 1.400 mm | Expansion range: 445 -530 mm | Number of levelling rolls: 7 pcs. | Diameter of the levellin...
Gammertingen, Germany - Trusted Seller
Dreher S26/82 GFS-RS #13222
- Manufacturer: Dreher
Cross section approx. 820 x 260 mm Use: Plastic; Other | Rotor diameter: 260 mm | Rotor width: 820 mm | Rotor knives: 5 Reihen je 2 Messer | Stator knives: row 2 Reihen je 2 Messer | Motor drive: 18,5 kW
Zuzenhausen, Germany - Trusted Seller
DREHER BHE-45-520-H-BSH/BRME-11-90-500-FL-r
- Manufacturer: Dreher
Insertion aid Loop bridge Material direction: left - right Decoiler is equipped with a pnematic arm YOM of leveller is 2009 - modified in 2016 YOM of decoiler is 2015
Gammertingen, Germany - Trusted Seller
2011 DREHER BHE-45-520-H-BSH/BRME-7-60-400-F
- Manufacturer: Dreher
Coil loading unit Stroke 500 mm Load capacity 5000 kg Material width max. 500 mm Material flow direction: right - left Decoiler is equipped with a pnematic arm YOM of feeder is 2005
Gammertingen, Germany 
1994 DREHER 1676 E/RDS / 2380 FM-FPS
- Manufacturer: Dreher
Material width: 650 mm | Material thickness: 0,8 - 3,0 mm | Coil weight: 3,5 t | Coil internal diameter: 460 - 530 mm | Coil external diameter: 1400 mm | No. of straightening rolls: 7 | Diameter of straightening...
Eislingen, Germany
1995 DREHER WAV-RDS-2Z Modell 1082 B
- Manufacturer: Dreher
- Power requirement: 3 kW
Material width: 310 mm | Material thickness: 0,2 - 3,0 mm | Diameter of rolls: 80 mm | Feed lenght: 0 - 9999,9 mm | Speed: 80 m/min | Power requirement: 3,0 kW | Weight of feeder: 0.45 t | Dimensions of feeder (...
Eislingen, Germany
1995 DREHER 1675-B11-FQ / 2350 B-FPS
- Manufacturer: Dreher
Material width: 300 mm | Material thickness: 0,4 - 3,5 mm | Material thickness / at material wicth: 3,5 / 50 mm | Coil weight: 1,25 t | Coil internal diameter: 320 - 420 mm | Coil external diameter: 1200 - 1300 ...
Eislingen, Germany