Used processing

Accumulation Extractor for Pulses

Tank Width: 1000 mm; Elevator height: 2500 mm; Elevator discharge Height: 1850mm; Tank length: 1500 mm.

Condux CSK 680

• Manufacturer: Condux

beater mill; Drive: 75 kW | 6 x strainer baskets: 4 - 20 mm. | Engine: 75 kW | 6 sieve baskets: 4 - 20 mm.

.. TS 2000 / 3 / VA

• Manufacturer: MINOX Maschinenhandels GmbH

Tumbler sieve machine used 3-deck machine, screening in 4 fractions.

Alpine B 315

• Manufacturer: Alpine

Mill Material: Product touched areas in stainless steel / product touched parts in stainless steel | Material: Stainless steel

Bauermeister USCHL/UZL

• Manufacturer: Bauermeister

Material: Mild steel | Material: Mild steel

MANUAL UNLOADING CHUTE

Manual unloading chute, with 2 comparments, bottom auger unloading remover, unloading height 1700mm, unloading Ø 150mm

Alexanderwerk Reibschnitzler 350

• Manufacturer: Alexanderwerk

Friction mill Drive: 1,5 KW | Material: Product-contact areas made of stainless steel | Material: Aluminium

BONFIGLIOLI GROUP BN 27C 4

• Manufacturer: Bonfiglioli

Dosing system with two inlets by Archimedean screw in stainless steel, two independent augers each equipped with a 0.4 kW gear motor. Inlet mouths diameter 90 mm each, two inlets in total. Outlet mouth diameter 1...

MÜLLNER & LUX KG GMDF.A

• Manufacturer: MÜLLNER & LUX KG

Conveying length approx. 4000 mm Twin-shaft flour mixer, multiple silo discharge device, mixing screw, dosing device used diameter approx. 300 mm the shafts of the mixer are divided into three sections. each is d...

MÜLLNER & LUX KG MLRE-A

• Manufacturer: MÜLLNER & LUX KG

Conveying length approx. 4000 mm Flour mixer, multiple silo discharge device, mixing screw, dosing device used diameter approx. 300 mm the shaft of the mixer is divided into three sections. each is driven by its ...

MÜLLNER & LUX KG GMDF.A

• Manufacturer: MÜLLNER & LUX KG

Conveying length approx. 4000 mm Twin-shaft flour mixer, multiple silo discharge device, mixing screw, dosing device used diameter approx. 300 mm the shafts of the mixer are divided into three sections. each is d...

2010 Nautical vacuum dryer Nautical vacuum dryer Hosokawa Alpine

• Manufacturer: Alpine

Nautical vacuum dryer - The Nautical vacuum dryer. · It is almost new we bought it 5 years ago but we used it one or two times. · It’s working volume is 350 liters · The water heater and the vacuum pump are o...

1973 BATES 50FF/2-2300

• Manufacturer: BATES

2 weighing bagging modules Bagging system for valve bags up to 50 kg with scales used control unit approx. 2 m conveyor belt The system has already been dismantled. The system comes from a decommissioned grain mi...

2001 Ismar VHS

• Manufacturer: Josef Unsold

Hammer Mill Machine is sold without sieves. Application: - For grinding grains/nuts (very fine) - For grinding grains/nuts (fine) - For grinding grains/nuts (medium-fine) - For grinding medium grains/nuts, breadc...

Cooling tunnel 600mm

• Manufacturer: Bifaro

The tunnel is 700 mm wide with a 600 mm food belt for products such as chocolate, chocolate chips, liqueur and various moulds of different sizes. The machine comes complete with its own independent cooling unit.