Used Heat Exchangers

Stainless Steel 316L Shell and Tube Heat Exchanger - IPP# 241117

• Manufacturer: Atlas Industrial

Tantalum Pfaudler (Chemetics) Shell and Tube Heat Exchanger - IPP# 203649

• Manufacturer: Pfaudler

Rated 300/FV @ -20 to 425 degrees tube side; FV/50 psi @- 20 to 425 degrees F shell side. clamped heads

Stainless Steel 316 Shell and Tube Heat Exchanger - IPP# 205770

• Manufacturer: Atlas

TEMA type BEM

Stainless Steel 304 Shell and Tube Heat Exchanger - IPP# 246693

• Manufacturer: RAS Process Equipment

Stainless Steel 304 Shell and Tube Heat Exchanger - IPP# 220721

• Manufacturer: Manning & Lewis

5/8" tubes With expansion joint

Stainless Steel 316L Shell and Tube Heat Exchanger - IPP# 238376

• Manufacturer: Allegheny Bradford Corp.

sanitary two pass Brackets tags and tube sides are 316L SS, internal all thread is Monel O rings are FDA approved EDPM. Product finish is <25Ra and Nitric Passivated, non product is Mill finish and pickled 34- 1/...

Stainless Steel 304 Plate and Frame Heat Exchanger - IPP# 246669

• Manufacturer: Sondex

Plate Pack7.52"--7.91" Certified by Plate Concepts Inc.

Carbon Steel Alfa Laval Spiral Heat Exchanger - IPP# 201666

• Manufacturer: Alfa-Laval

Additional Info:

Hastelloy - C276 Alfa Laval Spiral Heat Exchanger - IPP# 233192

• Manufacturer: Alfa-Laval

with 304 SS heads faced with Hastelloy C-276(0.105" thick) Inner channel spacing-Hot side 3/8", outer channel spacing cold side 1/4" 45" wide x 28" deep x 46" high.

Stainless Steel 321 Shell and Tube Heat Exchanger - IPP# 236148

• Manufacturer: Carl Capito

Shell has expansion bellows

Stainless Steel 316 Shell and Tube Heat Exchanger - IPP# 210814

• Manufacturer: Manning & Lewis

Job #: 160771

Stainless Steel 316 Shell and Tube Heat Exchanger - IPP# 210788

• Manufacturer: Yula

Shell with an MDMT of 32 degrees F at 150 psi. Tubes with an MDMT of 32 degrees F at 150 psi.

Stainless Steel 304 Shell and Tube Heat Exchanger - IPP# 216090

Cooling water nozzles: 3"

Stainless Steel 316 Shell and Tube Heat Exchanger - IPP# 209744

• Manufacturer: Monticello Tank Co.

Job #: T102099 C-2 shell MDMT rated for -20 degrees at 180/FV. Tube MDMT rated for -20 degrees F at 150/FV.

Stainless Steel 316 Shell and Tube Heat Exchanger - IPP# 209742

• Manufacturer: Monticello Tank Co.

Job #: Y102099C1 shell MDMT is rated for -20 degrees F at 185/FV. tubes MDMT is rated for -20 degrees F at 152/FV psi. U bend tubes, 0.375" od X 0.049" thick.