Building Filters

98

Used Doosan in Czech Republic

  • Trusted Seller
    CNC carousel Doosan PUMA V550,

    CNC carousel Doosan PUMA V550, year 2014

    • Manufacturer: Doosan
    • Model: PUMA V550
    • Spindle bore: 105 mm

    CNC Carousel Doosan V550 Manufacturer: Doosan Type: PUMA V550 Year of manufacture: 2014 Control system: Fanuc Max. workpiece diameter 800 mm Chuck diameter on the machine: 450 mm Max. workpiece height: 750...

    Jirkov, Czech Republic
  • Trusted Seller
    CNC horizontal turning center Doosan

    CNC horizontal turning center Doosan LYNX 220 B with bar feeder and tailstock

    • Manufacturer: Doosan
    • Model: LYNX 220B

    CNC horizontal turning center Doosan LYNX 220 B with bar feeder and tailstock Manufacturer: Doosan Type: LYNX 220 B Year of manufacture: 2003 Control system: Doosan Fanuc max. turning length 305 mm max. tur...

    Jirkov, Czech Republic
  • Trusted Seller
    2013 DOOSAN PUMA TT 1800

    2013 DOOSAN PUMA TT 1800 SY

    • Manufacturer: Doosan
    • Model: PUMA TT1800SY
    • Spindle bore: 105 mm

    The Doosan Puma TT 1800 SY lathe is in good technical condition. In operation from the end of 2014. By agreement, possible to view, disconnected. Includes feeder SS 2500.

    Prague, Czech Republic
  • Trusted Seller
    2016 DOOSAN PUMA TT 1800

    2016 DOOSAN PUMA TT 1800 SY

    • Manufacturer: Doosan
    • Model: PUMA TT1800SY
    • Spindle bore: 105 mm

    4-axis CNC lathe Doosan Puma TT 1800 SY has 2 spindles, 2 heads and Y axis. Control system Fanuc 31i-B. Available with 1.5 m bar feeder – Spacesaver 2500 type. The machine is in good technical condition and c...

    Prague, Czech Republic
  • Trusted Seller
    2011 Doosan Lynx 300

    2011 Doosan Lynx 300

    • Manufacturer: Doosan
    • Model: LYNX 300

    CNC lathe Type: Lynx 300 Manufacturer: Doosan Year: 2011 Control: Fanuc i Series Chuck Size: 10” Maximum turning diameter: 450 mm Maximum turning length: 765 mm Spindle bore: 76 mm Maximum spindle speed:...

    Czechia
  • Trusted Seller
    Doosan Puma 2100 MS I

    Doosan Puma 2100 MS I CNC Lathe I 2013

    • Manufacturer: Doosan
    • Model: PUMA 2100MS
    • Spindle bore: 82 mm

    Discover offering this pre-owned Doosan Puma 2100 MS CNC Lathe, manufactured in 2013 and currently located in Czech Republic. This high-performance CNC lathe is equipped with a Doosan-Fanuc i Series control unit ...

    Czechia
  • Trusted Seller
    CNC lathe Doosan Lynx 220

    CNC lathe Doosan Lynx 220 LS, year 2012

    • Manufacturer: Doosan
    • Model: LYNX 220LS
    • Spindle bore: 52 mm
    • Power requirement: 7.5 kW

    Fanuc-i control system. A lathe does not have driven tools, it has a counterspindle. circulating diameter above bed 600 mm circulating diameter above the support 400 mm max. machining diameter 525 mm max. machini...

    Prague, Czech Republic
  • Trusted Seller
    VMC DOOSAN DNM5700 – yop

    VMC DOOSAN DNM5700 – yop 2021

    • Manufacturer: Doosan

    Number of machining axes (without parallel axes) 3 of which parallel CNC axes 3 X-axis travel 1050 mm Y-axis travel 570 mm Z-axis travel 510 mm TABLE Clamping surface (left-right) 1300 mm Clamping surface (front-...

    Prague, Czech Republic
  • Trusted Seller
    2011 Doosan Puma 2100 MS

    2011 Doosan Puma 2100 MS

    • Manufacturer: Doosan
    • Model: PUMA 2100MS
    • Spindle bore: 82 mm

    5-axis CNC lathe Type: Puma 2100 MS Manufacturer: Doosan Year: 2011 Control: Fanuc 5-axis lathe Max turning diameter: 406 mm Max turning length: 520 mm Swing over bed: 780 mm Chuck diameter: 210 mm X: 2...

    Czechia
  • Trusted Seller
    2022 Doosan Puma GT 2600

    2022 Doosan Puma GT 2600 LM

    • Manufacturer: Doosan
    • Model: PUMA GT2600LM
    • Spindle bore: 82 mm

    3-axis CNC lathe Type: Puma GT 2600 LM Manufacturer: Doosan Year: 2022 Control: Fanuc i-Series Turning diameter over bed: 630 mm Turning diameter over support:460 mm Max turning length: 1030 mm Spindle bo...

    Czechia
  • Trusted Seller
    2016 Doosan DNM 4500

    2016 Doosan DNM 4500

    • Manufacturer: Doosan
    • Model: DNM 4500
    • Spindle taper: BT 40

    The machine is in good technical condition, under power. Chip conveyor is included.

    Brno, Czech Republic
  • Trusted Seller
    2012 Doosan HM 8000

    2012 Doosan HM 8000

    • Manufacturer: Doosan
    • Model: HM 8000

    The machine is in good technical condition, under power, after agreement is possible to test it.

    Brno, Czech Republic
  • Trusted Seller
    2006 Doosan LYNX 220

    2006 Doosan LYNX 220

    • Manufacturer: Doosan
    • Model: LYNX 220
    • Spindle bore: 52 mm
    • Power requirement: 7.5 kW

    The machine is in good technical condition, under power, after agreement is possible to test it.

    Brno, Czech Republic
  • Trusted Seller
    2023 Doosan M0617

    2023 Doosan M0617

    • Manufacturer: Doosan
    • Model: M0617
    • no. of axis: 6 axis

    Number of axes: 6 pcs | Maximum lifting capacity: 6 kg | Source: Phoenix XQ400 C puls | Tipping: 2700 mm | Operating range: 360 | Robot reach: 1700 mm | Machine weight: 34 kg

    Brno, Czech Republic
  • Trusted Seller
    2011 Doosan LYNX 300

    2011 Doosan LYNX 300

    • Manufacturer: Doosan
    • Model: LYNX 300
    • Spindle bore: 76 mm

    Control system fanuc: i Series | Turn table diameter: 450 mm | Turning lenght: 750 mm | Sloping bed: YES | Spindle bore: 76 mm | Turret head: YES | Spindle speed: 0 - 3500 /min. | Main motor power: 15 kW | Machi...

    Brno, Czech Republic
  • no-image_en.png

    Doosan PUMA 2500 CNC Lathe

    • Manufacturer: Doosan
    • Model: PUMA 2500

    Good condition Doosan PUMA 2500 CNC Lathes available between 2007 and 2009 years. Located in Czech Republic and other countries. Click request price for more information.

    Czech Republic
12345