Used DoAll Machine Tools

Doall Surface Grinder, Model D1030-1

• Manufacturer: DoAll
• Model: D-1030

Doall Surface Grinder, Model D1030-1 Used Doall surface grinder, model D1030-1, with model BD4-2 spindle, 220 volt, serial# 230-68160.

DOALL 1224 #0609320

• Manufacturer: DoAll
• Model: 1224

Doall 2002 Doall C-916 Horizontal Bandsaw

• Manufacturer: DoAll
• Model: C-916

Manual, Roller Conveyors, 6.1a, 2 Hp, 1750 Rpm, 158" Band Length

1989 DoAll G-618M

• Manufacturer: DoAll
• Model: G-618M

6" x 18" DOALL HAND FEED HORIZONTAL SURFACE GRINDER, Model G-618M, 6" x 18" Walker Cermax Permanent Magnetic Chuck, 7" Wheel Size, 12" Height Under Wheel, 1 HP, New 1989. Spindle Model MD-5, Cabinet Base, Table S...

DOALL HL-1030 #1111525

• Manufacturer: DoAll

230V, 1-Phase, 60HZ

DOALL D6-1 #0312222

• Manufacturer: DoAll
• Model: D-6

MANUFACTURER: DOALL MODEL #: D6-1 SERIAL #: 39-631187 VOLTS: 220 / 3 / 60 HYDRAULIC PUMP MOTOR: MANUFACTURER: R&M RPM: 1725 HP: 1.5 VOLTS: 220 / 3 / 60 SPINDLE: MODEL: MD-6 SERIAL #: 1464 TABLE: 18 ½” x 6” Electr...

Doall Vertical Bandsaw

• Manufacturer: DoAll
• Model: 1612-3

36a Name: Vertical Bandsaw | Arrival date: 10-08-2025 | Dimensions l x w x h (inches): 60 x 56 x 82 | Capacity: 24" X 31" | Electrical: 3/60/440 | Weight (lb.): 1920 | Available quantity: 1

DOALL TF-1421 BANDSAW

• Manufacturer: DoAll
• Model: TF-1421

LOCATION: Pittsburgh Pennsylvania CONDITION: good – working LOADING: seller can load on truck. Machine Spec: CAPACITY: 14″ x 21″ CAPACITY @ 45 DEGREES ……….. 14″ X 14″ LENGTH OF BLADE …………….. 172″ WIDTH OF BLADE …...

DoAll DGP24 Geared Head Drill Press

• Manufacturer: DoAll
• Model: DGP-24

DoAll DGP24 Geared Head Drill Press, S/N 3-8403, (12) Spindle Speeds 90 - 3360 RPM, 24" x 24" Table, 230 Volt (Location: Toledo, OH)

DOALL ML

• Manufacturer: DoAll
• Model: ML

10" HEIGHT X 16" THROAT 24" X 24" TILTING TABLE VARIABLE SPEED 50 TO 1600 FPM BLADE WELDER AND GRINDER 120" BLADE LENGTH 220 VOLTS 3 PH

DOALL 26

• Manufacturer: DoAll
• Model: 26

26" THROAT DEPTH 1" BLADE ONE 30" X 30" TILTING TABLE WITH FOOT PEDAL CONTROL ONE 17" X 20" TABLE 0 - 1600 FPM WORK LIGHT EXTRA BLADE BLADE WELDER AND GRINDER EXTRA HEAVY TABLE SUPPORTS SEE PICTURE

DOALL 2613-3

• Manufacturer: DoAll
• Model: 2613-3

Doall Vertical Bandsaw Variable Speed Hydraulic Feed Table Blade Welder With hydraulic table feed Doall Model AW-2 4KVA Blade Welder, grinder & shear Selector switch for off - on 3-speed transmission Electric f...

1984 DoAll 3613-20

• Manufacturer: DoAll
• Model: 3613-20

36" DOALL VERTICAL BAND SAW, Model 3613-20, 36" Throat Depth, 30" x 30" Table, 13" Work Height Capacity, Table Tilt L/ R. 30" x 30" 2-Way Tilting Table, DoAll DBW-15 Blade Welder & Shear, Cast Iron Blade Wheels, ...

1960 DoAll 1612-1

• Manufacturer: DoAll
• Model: 1612-1

16" DOALL VERTICAL BAND SAW, Model 1612-1, 24" x 24" Table, 1 HP, 5200 FPM, New 1960. 24" x 24" 2-Way Tilting Table, 16" Throat, 12" Work Height, 50-5200 FPM Variable Blade Speed, 120" Blade Length, 1HP Motor, 22...

DOALL C-1216A

• Manufacturer: DoAll
• Model: C-1216A

12" x 16" Flats, 15" Round Cap, IF DOING BUNDLE OF SMALL PARTS HAS NESTING VISE CLAMPS Blade Size: 1.5" x 162" x .035" Blade Speeds Variable.: 40 - 450 FPM EQUIPPED WITH: ...