Used Lathes in Switzerland

Trusted Seller
TORNOS M 7
- used
- Manufacturer: Tornos
- Model: M7
Diameter of work admitted: 7 mm | With flat cames: 60 mm | Spindle hole: 8 mm | Max. treading diameter: 6 M | Number of tool cutters: 5 | Number of spindle speeds: 20 | From: 1400 t/min | Up to: 10000 t/min | Vo...
Brügg, Switzerland
Trusted Seller
TECHNIKUM BIEL 102
- used
- Manufacturer: TECHNIKUM BIEL
Centre height: 102 mm | Distance between centres: 370 mm | Inner taper type: 20 W | From: 50 t/min | Up to: 1200 t/min | Voltage 50 hz 3x: 380 Volt | Machine's weight about: 450 kg | Length: 1200 mm | Width: 700...
Brügg, Switzerland
Trusted Seller
HABEGGER NEOTOR
- used
- Manufacturer: HABEGGER
Centre height: 102 mm | Distance between centres: 450 mm | Swing over cross-slide: 120 mm | Swing over bed: 200 mm | Spindle hole: 20.0 mm | Inner taper type: 20 W | Taper in tailstock: 2 CM | Voltage 50 hz 3x: ...
Brügg, Switzerland
Trusted Seller
TORNOS M 4
- used
- Manufacturer: Tornos
Diameter of work admitted: 4 mm | With flat cames: 28 mm | Spindle hole: 6 mm | Max. treading diameter: 4 M | Number of tool cutters: 5 | Number of spindle speeds: 14 | From: 2000 t/min | Up to: 12000 t/min | Vo...
Brügg, Switzerland
Trusted Seller
TORNOS R 10
- used
- Manufacturer: Tornos
- Model: R10
Diameter of work admitted: 10 mm | With flat cames: 70 mm | With bell cames: 100 mm | Spindle hole: 13 mm | Max. treading diameter: 8 M | Number of tool cutters: 5 | Number of spindle speeds: 20 | From: 1050 t/m...
Brügg, Switzerland
Trusted Seller
TORNOS M 4
- used
- Manufacturer: Tornos
Diameter of work admitted: 4 mm | With flat cames: 28 mm | Spindle hole: 6 mm | Max. treading diameter: 4 M | Number of tool cutters: 5 | Number of spindle speeds: 14 | From: 2000 t/min | Up to: 12000 t/min | Vo...
Brügg, Switzerland
Trusted Seller
TORNOS R 10
- used
- Manufacturer: Tornos
- Model: R10
Diameter of work admitted: 10 mm | With flat cames: 70 mm | With bell cames: 100 mm | Spindle hole: 13 mm | Max. treading diameter: 8 M | Number of tool cutters: 5 | Number of spindle speeds: 20 | From: 1050 t/m...
Brügg, Switzerland
Trusted Seller
TORNOS M 4
- used
- Manufacturer: Tornos
Diameter of work admitted: 4 mm | With flat cames: 28 mm | Spindle hole: 6 mm | Max. treading diameter: 4 M | Number of tool cutters: 5 | Number of spindle speeds: 14 | From: 2000 t/min | Up to: 12000 t/min | Vo...
Brügg, Switzerland
Trusted Seller
TORNOS R 10
- used
- Manufacturer: Tornos
- Model: R10
Diameter of work admitted: 10 mm | With flat cames: 70 mm | With bell cames: 100 mm | Spindle hole: 13 mm | Max. treading diameter: 8 M | Number of tool cutters: 5 | Number of spindle speeds: 20 | From: 1050 t/m...
Brügg, Switzerland
Trusted Seller
ESCO D 4
- used
- Manufacturer: Esco
Diameter of work admitted: 4 mm | With flat cames: 24 mm | With feed device 11.2: 58 mm | Spindle hole: 4 mm | Number of tool cutters: 2 | Number of spindle speeds: 2 | From: 4000 t/min | Up to: 6000 t/min | Vol...
Brügg, Switzerland
Trusted Seller
SIMONET 102
- used
- Manufacturer: SIMONET
Control: BERGER Villeret | Centre height: 102 mm | Distance between centres: 450 mm | Swing over cross-slide: 120 mm | Swing over bed: 200 mm | Spindle hole: 20.0 mm | Inner taper type: 20 W | Taper in tailstock...
Brügg, Switzerland
Trusted Seller
TRAUB A 15
- used
- Manufacturer: Traub
- Model: A15
Max. work piece diameter: 15 mm | Turning length: 70 mm | Spindle hole: 15 mm | Max. treading diameter: 8 M | Production capacity: 28 - 2100 p/h | Number of spindle speeds: 12 | From: 900 t/min | Up to: 6500 t/m...
Brügg, Switzerland
Trusted Seller
TORNOS T 4
- used
- Manufacturer: Tornos
Diameter of work admitted: 4 mm | With flat cames: 28 mm | Spindle hole: 6 mm | Max. treading diameter: 4 M | Number of tool cutters: 5 | Number of spindle speeds: 14 | From: 2000 t/min | Up to: 12000 t/min | Vo...
Brügg, Switzerland
Trusted Seller
TORNOS M 7
- used
- Manufacturer: Tornos
- Model: M7
Diameter of work admitted: 7 mm | With flat cames: 60 mm | Spindle hole: 8 mm | Max. treading diameter: 6 M | Number of tool cutters: 5 | Number of spindle speeds: 20 | From: 1400 t/min | Up to: 10000 t/min | Vo...
Brügg, Switzerland
Trusted Seller
TORNOS T 4
- used
- Manufacturer: Tornos
Diameter of work admitted: 4 mm | With flat cames: 28 mm | Spindle hole: 6 mm | Max. treading diameter: 4 M | Number of tool cutters: 5 | Number of spindle speeds: 14 | From: 2000 t/min | Up to: 12000 t/min | Vo...
Brügg, Switzerland
Traub A15 Lathe
- used
- Manufacturer: Traub
- Model: A15
- Spindle Bore: 15 millimeters available
Good condition Traub A15 Lathes manufactured in 1972. Located in Germany and other countries. Click request price for more information.
Germany