Used Disco Saws in Mexico

3 HP BENCH SAW 12" DIAMETER SAW BLADE

• Manufacturer: Disco

PART: 12405-14 - 3 HP BENCH SAW 3 HP 12" DIAMETER SAW BLADE USED - GOOD CONDITION 220V, 3 PHASE

TABLE SAW - BLADE 10" - MOTOR 3 HP

• Manufacturer: Disco

PART: 12345-1 - TABLE SAW - 10" BLADE - 3 HP MOTOR - RIDGID USED - GOOD CONDITION

RADIAL SAW - BLADE 15.75" - 4 HP - 21.5" LONG

• Manufacturer: Disco

PART: 2MA-640CE - RADIAL SAW - BLADE 15.75" - 4 HP - 21.5" LONG NEW WITH WARRANTY Heavy castings and the eight bearing saw carriage makes this machine very accurate and rigid. European quality made to last! 4 HP ...

AM-2016 - PENDULUM SAW - MOTOR 5 HP, 220V, 3 PHASE - 16" CUTTING DISC

• Manufacturer: Disco

PART: 1AM-2016 - PENDULUM SAW - 5 HP MOTOR, 220V, 3 PHASE - 16" CUTTING BLADE NEW WITH WARRANTY 16" DIAMETER BLADE 5 HP MOTOR, 220V, 3 PHASE, 3,500 RPM 2 SIDE WORK TABLES WITH 120 CM LONG ROLLERS EACH 1 ADJUSTABL...

RADIAL SAW - BLADE 15.75" - 4 HP - LENGTH 27.75" - BLADE 15.75" - 4 HP - LENGTH 27.75

• Manufacturer: Disco

PART: 2MA-800CE - RADIAL SAW - BLADE 15.75" - 4 HP - 27.75" LONG NEW WITH WARRANTY Heavy castings and the eight bearing saw carriage makes this machine very accurate and rigid. European quality made to last! 4 HP...

TABLE SAW - 10" BLADE - 2 HP MOTOR - FOLDING - FOLDABLE

• Manufacturer: Disco

PART: 12345-1 - TABLE SAW - 10" BLADE - MOTOR 2 HP - FOLDING - DEWALT USED - GOOD CONDITION

BENCH SAW 3 HP 3 HP MOTOR 12" DIAMETER BLADE

• Manufacturer: Disco

PART: 12405-13 - BENCH SAW BENCH SAW 3 HP MOTOR 12" DIAMETER BLADE USED - GOOD CONDITION 220V, 3 PHASE

NE-SPO-001 - PENDULUM SAW - 5 HP, 220V, 3-PHASE MOTOR - 16" CUTTING BLADE

• Manufacturer: Disco

PART: 1NE-SPO-001 - PENDULUM SAW - MOTOR 5 HP, 220V, 3 PHASE - 16" CUT-OFF WHEEL NEW WITH WARRANTY 16" DIAMETER BLADE MOTOR 5 HP, 220V, 3 PHASES, 3,500 RPM 2 SIDE WORK TABLES, 120 CM LONG EACH ONE NEW SIDE TABLES...

SL-DC-J4-400-3 - 16" DISC METAL CUTTING MACHINE

• Manufacturer: Disco

PART: 1SL-DC-J4-400-3 - 16" DISC METAL CUTTING MACHINE PRESS TILT 45 DEGREES (LEFT AND RIGHT) DISC DIAMETER: 16" X 1" X 1/8" X 1" X 1" X 1/8 CUTTING CAPACITY: TUBE: 5" DIAMETER X 1/4 WALL THICKNESS

Imaq Disc Saw MC31A

• Manufacturer: Disco

Rpm/min: 40-80 | Cutting capacity: 90º / 45 | Round (tube): 100 mm, 80 mm | Square (profile): 90*90 mm, 80×80 mm | Rectangular: 120*60 mm / 100*50 mm

italian revolutionary low blade crosscut saw