Used Disco Processing

Centrifuge-Disc Bowl 35 kW (47 HP) Stainless Steel - IPP# 49731

• Manufacturer: Kyffhausehutte (Germany)

431SS Capacity to 20,000 liter/hr.

Centrifuge-Disc Bowl 2.2 kW (3 HP) Stainless Steel 316 - IPP# 12922

• Manufacturer: Alfa Laval

solid disc bowl 2-chamber clarifier centrifuge. UL label less control. gear driven by motor

Centrifuge-Disc Bowl 11.2 kW (15 HP) - IPP# 96372

• Manufacturer: Disco

disc bowl Clarifier (2-phase) centrifuge with paring disc discharge of liquid phase Rising channels on outside edge of disc's (Scalloped disc's) Frame assembly serial #1624-930. Bowl assembly serial #16290-520 22...

Centrifuge-Disc Bowl 7.5 kW (10.1 HP) - IPP# 99748

• Manufacturer: Westfalia

disc bowl centrifuge. Separator (3-phase) design. Special design for glucose separation Cast iron frame w/brake, oil level sight glass and revolution indicator for bowl speed check Drive by standard flange mount ...

Centrifuge-Disc Bowl 14.9 kW (20 HP) Stainless Steel 316 - IPP# 200073

• Manufacturer: Westfalia

Clarifier (two phase) centrifuge with paring disc discharge of liquid phase self cleaning discharge of solids. Gas tight design of neck bearing bridge Rising channels on the outside edge of disc's (scalloped disc...

Centrifuge-Disc Bowl 1.5 kW (2 HP) Stainless Steel 316 - IPP# 102600

• Manufacturer: Disco

separator double paring disc 1.1 KW/1.5 KW, 3/50/220/380 volt 1420 rpm motor Tools

Centrifuge-Disc Bowl 5.6 kW (7.5 HP) Stainless Steel 316 - IPP# 82658

• Manufacturer: Disco

solid disc bowl centrifuge. Separator design (3 phase) w/paring discs on light and heavy phases.

Centrifuge-Disc Bowl 30 kW (40.2 HP) Stainless Steel 316 - IPP# 220187

• Manufacturer: Westfalia

self cleaning disc separator Clarifier design (liquid/solid separation) rated 1.0 kg/cm2 heavy phase With 120 volt electronic timing, air/water control box, feed valve light and heavy phase discharge valves.

Centrifuge-Disc Bowl 30 kW (40.2 HP) Stainless Steel 316 - IPP# 216545

• Manufacturer: Disco

nozzle bowl disc stack centrifuge with centrifugal pump for liquid discharge Nozzle continuous open discharge of solids Horizontal flange type motor with clutch

Centrifuge-Disc Bowl - IPP# 210559

• Manufacturer: Westfalia

control panels for Disc centrifuge with timed solids discharge with feed valve, bowl valve, flush valve, partial discharge, partical feed controls.

Manual Discharge-Top Centrifuge-Basket 1,250 mm (49.2 in) Stainless Steel 316L - IPP# 222622

• Manufacturer: Ferrum

top load/unload pressure 1.8 bar @ 150 deg C via a hydraulic Rexroth type 380/660 volt 1480/1475 rpm motor Thermosyphon which is hydraulic driven by the same powerpack, 2-internal spray nozzles, 1-150mm filtrate ...

Dravo Pelletizing Disk, 14", S/S, 0.25 HP

• Manufacturer: Dravo

Dravo Pelletizing Disk, 14", S/S, 0.25 HP Used Dravo pelletizing disk, stainless steel construction, 14" diameter disk, on base with 0.25 hp motor.

Niro/Aeromatic Spheronizer Disk, Model S320

• Manufacturer: Niro Aeromatic

Niro/Aeromatic Spheronizer Disk, Model S320 Used Niro/Aeromatic spheronizer disk, model S320, stainless steel.

2 Ea. Extruder Rupture Disk

2 Ea. Extruder Rupture Disk, NEW 4000psi, 1/2-20UNF, 6"+hex

Dryer-Thermal Disc 1,219 mm (48 in) Carbon Steel - IPP# 96719

• Manufacturer: Disco

Torus disc cooler