Used processing in chugoku

Dravo Pelletizing Disk, 14", S/S, 0.25 HP

• Manufacturer: Dravo

Dravo Pelletizing Disk, 14", S/S, 0.25 HP Used Dravo pelletizing disk, stainless steel construction, 14" diameter disk, on base with 0.25 hp motor.

Niro/Aeromatic Spheronizer Disk, Model S320

• Manufacturer: Disco

Niro/Aeromatic Spheronizer Disk, Model S320 Used Niro/Aeromatic spheronizer disk, model S320, stainless steel.

Dryer-Thermal Disc 1,219 mm (48 in) Carbon Steel - IPP# 96720

• Manufacturer: Disco

Torus disc cooler Vessel rated 15 psig/full vacuum @ 385 degree F Outboard bearings Johnson rotary joints on shaft Max speed 15 rpm

Dryer-Thermal Disc 1,753 mm (69 in) Carbon Steel - IPP# 96831

• Manufacturer: Bepex

Torus disc dryer The rotor is 60" diameter x 14' long, and is hard faced. The rotor is cored for steam heating Heating medium is steam Trough is 69" wide x 177" long x 84" high with a vapor dome. Total height wit...

Carbon Steel Dryer-Thermal Disc - IPP# 33050

• Manufacturer: Strong Scott

Torus disc dryer screw 150 psi @ 375 deg F Trough is 64" long x 28" wide x 36" deep Requires 5 HP drive No cover

Dryer-Thermal Disc 1,219 mm (48 in) Carbon Steel - IPP# 96719

• Manufacturer: Disco

Torus disc cooler

Dryer-Thermal Disc 1,016 mm (40 in) Carbon Steel - IPP# 88925

• Manufacturer: Bethlehem Corp

Thermal disc processor w/24" dia thermal discs Trough dimensions 40" wide x 9'6" long x 30" deep 5 shafts w/rotary joints thru Falk reducer 30.69:1 ratio 12" dia x 5'6" long discharge screw driven by 5 HP, 3/60/2...

Dryer-Thermal Disc Bepex TD48-9 - IPP# 225385

• Manufacturer: Bepex

Bepex Torus Disc Cooler U shaped trough, continuous design. Certified by Moorhead Machinery & Boiler Co Moorhead Serial number 605-2300. Shell rated 15 psi @ 350 degrees. No jacket on trough. U shaped trough, bol...

Dryer-Thermal Disc 1,219 mm (48 in) Carbon Steel - IPP# 225384

• Manufacturer: Disco

Bepex Torus Disc Cooler U shaped trough, continuous design. Certified by Moorhead Machinery & Boiler Co Moorhead Serial number 605-2299. Working pressure in the hollow rotor is 100 PSI @ + 50 to 350 degrees F She...

2 Ea. Extruder Rupture Disk

• Manufacturer: Disco

2 Ea. Extruder Rupture Disk, NEW 4000psi, 1/2-20UNF, 6"+hex

Industrial Belt and Disc Sander, Dust Collection Port

• Manufacturer: Disco

Industrial Belt and Disc Sander, typically supports 120V or 240V power supply, with a motor power rating ranging from 1 HP to 2 HP, belt size commonly 6" x 48", disc diameter often 9" or 10", table tilt range usu...

Jamesbury 4" Pneumatic Wafer Butterfly Valve Cast Iron / SS 170/285PSI

“UNTESTED, REFER TO PICTURES FOR CONDITION.” Jamesbury 4" Pneumatic Wafer Butterfly Valve Cast Iron / SS 170/285PSI Jamesbury 4" Pneumatic Wafer Butterfly Valve Cast Iron / SS 170/285PSI THE LAST PICTURE IS ONE O...

Centrifuge-Disc Bowl 14.9 kW (20 HP) Stainless Steel 316 - IPP# 238451

• Manufacturer: Alfa Laval

20" diameter self cleaning disc stacks intermittent discharge 3300 gph feed capacity

Centrifuge-Disc Bowl 30 kW (40.2 HP) Stainless Steel - IPP# 229018

• Manufacturer: Westfalia

pressure 1.5 bar @ 100 degrees C bolted top cover,