Used Disco Processing

Centrifuge-Disc Bowl 1.5 kW (2 HP) Stainless Steel 316 - IPP# 102600

• Manufacturer: Westfalia

separator double paring disc 1.1 KW/1.5 KW, 3/50/220/380 volt 1420 rpm motor Tools

Centrifuge-Disc Bowl 5.6 kW (7.5 HP) Stainless Steel 316 - IPP# 82658

• Manufacturer: Westfalia

solid disc bowl centrifuge. Separator design (3 phase) w/paring discs on light and heavy phases.

Centrifuge-Disc Bowl 30 kW (40.2 HP) Stainless Steel 316 - IPP# 220187

• Manufacturer: Westfalia

self cleaning disc separator Clarifier design (liquid/solid separation) rated 1.0 kg/cm2 heavy phase With 120 volt electronic timing, air/water control box, feed valve light and heavy phase discharge valves.

Centrifuge-Disc Bowl 30 kW (40.2 HP) Stainless Steel 316 - IPP# 216545

• Manufacturer: Westfalia

nozzle bowl disc stack centrifuge with centrifugal pump for liquid discharge Nozzle continuous open discharge of solids Horizontal flange type motor with clutch

Centrifuge-Disc Bowl - IPP# 210559

• Manufacturer: Disco

control panels for Disc centrifuge with timed solids discharge with feed valve, bowl valve, flush valve, partial discharge, partical feed controls.

Manual Discharge-Top Centrifuge-Basket 1,250 mm (49.2 in) Stainless Steel 316L - IPP# 222622

• Manufacturer: Ferrum

top load/unload pressure 1.8 bar @ 150 deg C via a hydraulic Rexroth type 380/660 volt 1480/1475 rpm motor Thermosyphon which is hydraulic driven by the same powerpack, 2-internal spray nozzles, 1-150mm filtrate ...

Dravo Pelletizing Disk, 14", S/S, 0.25 HP

• Manufacturer: Dravo

Dravo Pelletizing Disk, 14", S/S, 0.25 HP Used Dravo pelletizing disk, stainless steel construction, 14" diameter disk, on base with 0.25 hp motor.

Niro/Aeromatic Spheronizer Disk, Model S320

• Manufacturer: Niro Aeromatic

Niro/Aeromatic Spheronizer Disk, Model S320 Used Niro/Aeromatic spheronizer disk, model S320, stainless steel.

Carbon Steel Dryer-Thermal Disc - IPP# 33050

• Manufacturer: Disco

Torus disc dryer screw 150 psi @ 375 deg F Trough is 64" long x 28" wide x 36" deep Requires 5 HP drive No cover

Dryer-Thermal Disc 1,016 mm (40 in) Carbon Steel - IPP# 88925

• Manufacturer: Disco

Thermal disc processor w/24" dia thermal discs Trough dimensions 40" wide x 9'6" long x 30" deep 5 shafts w/rotary joints thru Falk reducer 30.69:1 ratio 12" dia x 5'6" long discharge screw driven by 5 HP, 3/60/2...

Industrial Belt and Disc Sander, Dust Collection Port

Industrial Belt and Disc Sander, typically supports 120V or 240V power supply, with a motor power rating ranging from 1 HP to 2 HP, belt size commonly 6" x 48", disc diameter often 9" or 10", table tilt range usu...

Jamesbury 4" Pneumatic Wafer Butterfly Valve Cast Iron / SS 170/285PSI

• Manufacturer: Disco

“UNTESTED, REFER TO PICTURES FOR CONDITION.” Jamesbury 4" Pneumatic Wafer Butterfly Valve Cast Iron / SS 170/285PSI Jamesbury 4" Pneumatic Wafer Butterfly Valve Cast Iron / SS 170/285PSI THE LAST PICTURE IS ONE O...

Uhmw Container Pucks 14 Mm Container Puck #16264

• Manufacturer: Uhmw Container Pucks

Uhmw container pucks in white polymer, total count of 250 pucks, 1. 5" x 1. 5" x 2. 250" high @ 106. 5 grams each, pucks have carved corners and central hole @ 14 mm diameter x 15/16" deep with . 250" hole bored ...