Used Processing in Hiroshima, Japan

1979 Izumi Food Machinery Cylinder Vertical
- Manufacturer: Izumi
Jacket / stirrer (0.75 kw, two stirring blades) Closed type, with shower ball / manhole
Hiroshima, Japan
1984 Iwai machine cylinder vertical type
- Manufacturer: Iwai Machinery
Jacket / stirrer (2.2 kW, 3 propeller blades) ※ Satake Multi Mixer (360 rpm) Closed type, with shower ball / manhole
Hiroshima, Japan
1996 HAKKO INDUSTRIES (now GL HAKKO) 6000L
- Manufacturer: Hakko
Explosion-proof, cyclo reducer (reduction ratio 1/15). Shaft seal: mechanical seal. Maximum pressure of main unit: FV to 0.18 MPa / Jacket: 0.54 MPa. Design temperature: [Body] -20 to 170°C / [Jacket] -20 to 200°C.
Hiroshima, Japan
Mutual Sangyo RM-1000
- Manufacturer: 相互産業
Capacity: 660L Gear ratio: 1/30 Lower discharge (slide gate type) Click here to see a video of the test run (YouTube) upon completion of the maintenance.
Hiroshima, Japan
Four stirrer paddles
Four paddle blades × 2 steps Motor: 11kw / 440v Power: 11kw | Material: Wetted part: SUS | Quantity saved: 1
Hiroshima, Japan
SUS tank with coil
Capacity: approx. 10 m3 With agitator (missing due to diversion of drive unit) Only near the bottom of the coil With heat insulator (with dents, etc.)
Hiroshima, Japan
Asada Ironworks MHK-20
- Manufacturer: 浅田鉄工
Due to long-term storage after maintenance, immediate delivery is not possible, but delivery can be made in a short period of time. Hydraulic unit available Drawings available
Hiroshima, Japan
Tokyo Coki MT-CD-2
- Manufacturer: 東京コーキ
Cooling and drying equipment in which cooling water or hot water is passed through a jacketed stainless steel trough, and cooled and dried as it is moved. The material rises from the lower vane to the upper disch...
Hiroshima, Japan
Tomoe Kogyo AS-26
- Manufacturer: 巴工業
Three-phase separation Rotation speed: 15,000 rpm With startup board Click here to see a video of the trial run when the maintenance was completed (YouTube).
Hiroshima, Japan
1973 Tomoe Kogyo P-3400
- Manufacturer: 巴工業
30kw 4000rpm/3200G Gear ratio: 1/165 Spare rotating elements available (gear ratio: 1/52) The machine is currently being serviced and we will upload images when completed.
Hiroshima, Japan
Ashizawa PLM-300
- Manufacturer: アシザワ
The vacuum specification was changed to a pressurized specification. Tank capacity 320L. Weight 4.6 tons. Bayer reduction gear drive. Can be converted to 200V by rewinding or replacing the motor.
Hiroshima, Japan
Osaka Stainless Steel Industry, vertical cylindrical type
- Manufacturer: Osaka Stainless Steel Industry Co.
1800φ × approx. 3200H (straight body 2000mm) Power: 3.7kw | Material: SUS | Quantity saved: One
Hiroshima, Japan
2000L Cylindrical vertical
With jacket and stirrer Material: SUS 304 | Quantity saved: 1
Hiroshima, Japan
10,000L (10m3) Cylindrical vertical type
Bottomless, with legs. Reduction ratio 1/29. Interior has been simply cleaned.
Hiroshima, Japan
1989 Matsumoto Machinery Works MARK III 48 × 30
- Manufacturer: Matsumoto Machinery Works
Hydraulic drive (has been converted to motor drive) Capacity: 458L Rotation speed: 1080rpm 800G
Hiroshima, Japan