Used Processing in Aosta Valley, Italy

HOT MACRO-PERFORATOR 3 to 16 mm holes

For BOPP PP PVC thermoplastics in general. Can be fit on cutting machines, rewinders, Flexoprinting machines or other plastic film treatment machines. Max perforation width 1.500 mm. Roll width 1.700 mm. (availab...

MACCHI FILM DIE diam.180 mm.

• Manufacturer: Macchi

For blown film die head 180 mm. inner diam. 340 mm. outer diam. Tongue and groove Height 145 mm.

Theysohn profile downstream equipment

• Manufacturer: Theysohn

THEYSOHN PROFILE EXTRUSION DOWNSTREAM EQUIPMENT machines are offered AS IS WHERE IS or RECONDITIONED Previously fitted on a 63 mm single screw extruder Greiner Genius CALIBRATOR CAL 2P/3.6 y.2004, 2 vacuum pum...

2011 AMUT BA 92

• Manufacturer: Amut

AMUT BA 92 TWIN SCREW EXTRUDER Mod.NOMAX for ABS and PVC n.2 x screws 92 mm Ø 28 L/D construction year 2011 a.c. 60 kw drive 400V, 50 Hz, 3 ph Output: 270 - 370 kg/h Hours of operation: 53638 h n.1 set od...

Extrusion blown film die Tecom diam.350 mm.

• Manufacturer: Germanplast

inner diam. 350 mm.

1998 EXACT CYCLOP 10B EDGE TRIM GRANULATOR

• Manufacturer: Cyklop

EXACT EDGE TRIM GRANULATOR Type CYCLOP 10 B APF 200 mm.wide, complete with unwind and nip rolls constructed in 1998 Complete with CE compliance, manual, drawings. This machine is offered TOTALLY RECONDITIONED

GERMANPLAST SCREW CONVEYORS

• Manufacturer: Germanplast

Made in sturdy painted carbon steel Size and angle depending on availability of the moment

water ring pelletizer 700 kg/h prt ready to go

• Manufacturer: PRT

PRT WATER RING PELLETIZER for PE PP PS PC ABS nominal capacity 600-700 kg/h (tested up to 900 with PS) N.4 cutting blades N.1 thermoregulation zones Heating power 8.00 kW Cutting motor power 4.00 kW N.1 wa...

TECNOVA VIBRO CLASSIFIER for extruders up to 1200 kg/h

• Manufacturer: Tecnova

VIBRO CLASSIFIER FOR GRANULATES 2 outlets dimensions : 500 x 1.400 mm. screen holes 8 mm Ø all parts in contact with water are in AISI304 stainless steel wheeled supporting structure complete with connectin...

TECNOVA EXTRUSION LINE 130 mm.500-600 kg/h

• Manufacturer: Tecnova

TECNOVA EXTRUSION LINE 130 mm. (5.11")500 kg/h (1,100 lbs/h) PE PP PC PS ABS PET PA Including: Scrap silo + Extraction auger (if needed) available also with hopper+loading screw conveyor Crammed feeder Extr...

extruder cdm prealpina 85 mm.35 LD for pe,pp,pc,ps,abs

• Manufacturer: Prealpina

CDM PREALPINA USED EXTRUSION LINE for HDPE LDPE LLDPE PS PC ABS PP nominal throughput rate 240-320 kg/h (depending on material and feeding rate) Total installed power 104 kw ca 380 V 50 H 3Ph (65% used in work...

CONVEYOR BELT, HORIZONTAL

• Manufacturer: VIRGINIO

Size: mm. 300(w)x 1500 (l) Side walls height 70 mm. PVC 2 belts x 3 mm. 0,13 kW motor Siemens magnetothermic switch Machine hardly ever used

Water tank for strand cooling

• Manufacturer: Germanplast

WATER COOLING TANK for strand pelletizers Constructed in AISI4304 stainless steel On 4 wheels (2 with brakes) Overall dimensions : LxWxH 2,5 x 0,5 x 1,0 mt. tank : LxWxH 2,5 x 0,5 x 0,25 mt.

TECNOVA 90 mm. 37 L/D degassing+screenchanger+WR pelletizer

• Manufacturer: Tecnova

TECNOVA RECYCLING EXTRUDER for BIO - PE PP ABS PC PS Barrel with 90 mm screw diam. 37 L/D Crammed feeding unit Is working with BIO at 70 rpm yielding 270 kg/h with PE at 100 rpm yelds 120 kg/h N.1 degassing ...

extruder twin screw corotating Maris 2 X 92 mm. 40 L/D n.2 degassing pumps

• Manufacturer: MARIS

MARIS TWIN SCREW EXTRUDER Barrel with 2 x 92 mm screws 40 L/D n.2 vacuum degassing pumps co-rotating parallel screws for polyolefines complete with 4-plate semi-automatic screenchanger hydraulic pack Averag...