Building Filters
- Trusted Seller
2003 DIMTER OPTIMIZING CUT OFF SAW (OPTICUT S 50)
- Manufacturer: Dimter
- Model: OPTICUT S 50
Sn: 1217,14 | Volts: 460 | Capacity max: 4″ HAUT X 12″ LARGE X 18′ AVEC POUSSOIR | Capacity min: 3/8″HAUT X3/4″ X 3-15/16″
Saint-Bonaventure, Canada - Trusted Seller
1999 GRECON / DIMTER OPTICUT 204 L OPTIMIZING CUT-OFF SYSTEM [SO-010485]
- Manufacturer: Dimter
GRECON/DIMTER OPTICUT 204 L Optimizing Cutoff System Specifications: -- For hard or soft wood. -- Left-to-right feed. -- Max. crosscut section 7-3/4" x 1-15/16" to 5-3/4" x 3-1/16". -- Board width cap. 1-1/5" to ...
- Trusted Seller
2003 DIMTER S 50 OPTIMIZING CUTOFF SAW [SO-280271]
- Manufacturer: Dimter
- Model: S 50
DIMTER - S50, ...Optimizing Cutoff Saw 4" x 12" Wide max. board capacity; highly accurate Push Feed Saw. Specifications: -- Left-hand version (material feeds from right-to-left), 18-1/2' infeed & 8' outfeed table...
- Trusted Seller
2003 DIMTER S50 Opticut
- Manufacturer: Dimter
This DIMTER S50 Opticut was manufactured in 2003. A robust optimizing cross-cut saw, it features a processing length of 5 m and a saw blade diameter of 500 mm. A new Movidrive converter was installed in 2018, enh...
Germany 
2003 DIMTER OPTICUT S 50
- Manufacturer: Dimter
- Model: OPTICUT S 50
DIMTER OPTICUT S50 OPTIMIZING CUT OFF SAW GREAT LOW COST AUTOMATION FOR 12" CUTTING UP TO 18' INBOUND. MACHINE IN GOOD CONDITION PER SELLER. Dimter Model S-50 Cross Cut Push Feed Optimizing Saw 7.5 HP motor 500 m...
GreCon Dimter OPTICUT 350 4R optimizer with 5 ejectors
- Manufacturer: Dimter
Max. cutting length /: 6500 currently 3400 mm | Min. element: 300 mm | Max. cutting height: 100 mm | Max. cutting width: 245 mm | Diameter of the disc: 450 mm | Engine power: 9 kW | Feed rate max.: 120 m/min | A...
Miechucino, Poland
2007 Cutting machine Dimter Opticut C700
- Manufacturer: Dimter
Cross-cutting machines for cross-cutting of sawn and unsawn wood blanks. Cross-cutting machines for cross-cutting of sawn and unsawn wood blanks. The machine consists of the following main parts: Left transporter...
Jonava District Municipality, Lithuania- Trusted Seller
2004 Dimter Opticut 450
- Manufacturer: Dimter
- Model: OPTICUT 450
Dimter (Weinig) Optimizing Cutoff saw Newly update software
Santa Monica, CA - Trusted Seller
2005 Dimter OptiCut 200 Elite
- Manufacturer: Dimter
- Model: OPTICUT 200 ELITE
Cutting width: 120 mm | Height of cut: 65 mm | Maximum length: 5200 mm
Brno, Czech Republic