Used Processing in Hiroshima, Japan

1988 Tanabe AUT - 42
- Manufacturer: タナベ
42" SUS316 Fully automatic bottom discharge type, hydraulically driven. No control panel. Hydraulic drive has been converted to motor drive.
Hiroshima, Japan
Tokuju Kosakusho V-200
- Manufacturer: 徳寿工作所
200L in stock / Total capacity 475L External dimensions: 2500 x 800 x 1950H (mm) Weight: approx. 700kg
Hiroshima, Japan
2012 [Kyoritsu] Upper discharge type *Maintained
- Manufacturer: 共立製作所
18" top discharge type.　　1.800 rpm. Serviced and test run verified. Click here to see a video of the trial run (YouTube) upon completion of maintenance.
Hiroshima, Japan
1992 Tomoe Kogyo AS16V
- Manufacturer: 巴工業
Two-phase separation Rotation speed: 15,000 rpm Starting board and disassembly tools are available. Two units of the same type are owned and there is a spare rotor for one unit. Click here to view a video of a tr...
Hiroshima, Japan
Alfa Laval BRPX413XGD-14-60
- Manufacturer: アルファ・ラバル
- Model: BRPX
concentrator Power: 30kw | Material: Wetted part SUS | Quantity saved: One
Hiroshima, Japan
Tanabe Wiltech Z2L-3LV
- Manufacturer: タナベウィルテック
5000rpm/4400G Nominal capacity: 3-5 m3/h New motor will be installed at the time of servicing
Hiroshima, Japan
2003 Okawara Kakoki L-8
- Manufacturer: 大川原化工機
Moisture evaporation capacity: 3kg/h Hot air inlet temperature: 250°C, exhaust air outlet temperature: 100°C Disk atomization, parallel flow method Atomizer model: OCA-008B Collection method: Single point collect...
Hiroshima, Japan
1992 [Oe Kogyo] Cooker conditioner
- Manufacturer: Oe Industry
Paddle type Internal volume: 1.1㎥ Design pressure: 0.2kg / cm2 Design temperature: 200 ℃ With supply conveyor (3.7kw)
Hiroshima, Japan
2011 Izumi Environmental Engineering Vertical
- Manufacturer: Izumi
Tube: 25.4φ (2t) x 3000L x 165 tubes (SUS304) Body plate: 500φ (SGP-E)
Hiroshima, Japan
1986 Tanabe Wiltech Z32-SL-V-HP
- Manufacturer: タナベウィルテック
5000rpm/4400G Nominal capacity: 3-5m3/h Variable impeller type Pole change motor
Hiroshima, Japan
Tanabe Wiltec TOP-48-80
- Manufacturer: タナベウィルテック
Fully automatic low-discharge type Maximum capacity 480L Rotation speed 1080rpm Centrifugal effect 800G Scraping device air-driven With control panel (without regenerative resistor)
Hiroshima, Japan
[TANABE WILTECH] Basket type centrifuge 55inch
- Manufacturer: タナベウィルテック
Fully automatic bottom discharge type. Hydraulic drive for scraper. Low speed motor 2.2Kw 200V. No nameplate.
Hiroshima, Japan
2002 Morimatsu Industrial Square Type
- Manufacturer: Morimatsu Industry
Panel tank with coin filling machine Tank 1000 × 2500 × 2000H + coin filling machine Total length 4000
Hiroshima, Japan
2009 Nippori Engineering DD-40NX6-0
- Manufacturer: ニッポリエンジニアリング
Treatment air volume 25m3/min
Hiroshima, Japan
1989 Tanabe Wiltech Z32SL-3LV
- Manufacturer: Tanabe Wiltech
Three-layer decanter 5000rpm/4400G Nominal capacity: 3-5m3/h Variable impeller type Pole change motor
Hiroshima, Japan