Used Processing

Falk 2100Y2-L Parallel Shaft Reducer Enclosed Gear Drive 182hp 8.188:1

• Manufacturer: Falk

“NEW OLD STOCK, SHELF WEAR”

Emuge IKZ-F3741L01 Hsk-a63 Speedsynchro Modular Tool Holder

• Manufacturer: EMUGE

“New without Factory Packaging” Model number: IKZ-F3741L01 | Mpn: IKZ-F3741L01 | Shipping weight: 15.2 lbs | Shipping dimensions: 19 x 15 x 9 in | Reference sku: 1011709

Falk 2070FC2B Ultramax Inline Gear Reducer 8.996:1

• Manufacturer: Falk

“SHELF WEAR”

Yoshikawa CF-200TSR-DV Circle Feeder 200v-ac

• Manufacturer: Yoshikawa

“Used” Model number: CF-200TSR-DV | Mpn: CF-200TSR-DV | Shipping weight: 163 lbs | Shipping dimensions: 45 x 22 x 19 in | Reference sku: 910579

Falk 2100YB2-LB Enclosed Gear Drive 6.958:1

• Manufacturer: Falk

“REBUILT BY ATLANTA GEAR WORKS”

Falk 2090YBXU2-AS Enclosed Gear Drive Mixer Reducer 75hp 15.42:1

• Manufacturer: Falk

“REBUILD BY FALK RENEW”

Axcelis 11023240C GSD200 Implanter Flat Thin Wafer Disk Assembly 125mm 180deg

• Manufacturer: Axcelis

“Used”

Nafco Filter Strainer

• Manufacturer: Nafco

MAWP: 180 PSI @ 450° F MDMT: 20° @ 180 PSI Overall dimensions: 24x32x14. Weight = 37 lbs. 1" inlet and outlet

Nafco Filter Strainer

Overall dimensions: 24x24x12. Weight = 43 lbs. 1-3/4 inlet and outlet

Key Cornell 6" Pump

• Manufacturer: Cornell

Yokogawa Engineering Lot

• Manufacturer: Yokogawa

This is a lot of engineering equipment from Yokogawa and other brands. There are Single Phase Wattmeters, Polyphase Wattmeters, and Power Factor Meters. There is also equipment from Durant and Syncro. These items...

Mikro-ACM-Pulverizer, Model 60ACM

• Manufacturer: Mikro

Mikro-ACM-Pulverizer, Model 60ACM Used MikroPul ACM air classifying mill pulverizer, model 60ACM, carbon steel construction, 3000 rpm max main shaft, with 75 hp, 230/460 volt motor,1800 rpm max separator classifi...

20" x 37" Rotex Screen, 2 Deck, Model 12

• Manufacturer: Rotex

20" x 37" Rotex Screen, 2 Deck, Model 12 Used 20" x 40" Rotex screen, model 12, stainless steel decks and bottom pan, aluminum cover, two-deck design on stand with 1 hp, 208-230/460 volt motor.

Quadro Comil, Model 196S, S/S

• Manufacturer: Quadro

Quadro Comil, Model 196S, S/S Used Quadro Comil, model196S, stainless steel construction, 7.5 hp, xp motor, serial# 196-0841.

Bauermeister Pin mill, S/S

• Manufacturer: Bauermeister

Bauermeister Pin mill, S/S Used Bauermeister pin mill, model UTL-316-SS, stainless steel product contact surfaces, pin mill wheel driven by 3 hp, 230/460 volt, 3450 rpm motor, feed by Accurate volumetric feeder, ...