Used controller in Gauteng, South Africa

Drive unit for tribological investigations (TM 260)

base module for studying various cases of sliding and rolling friction Description: Tribology studies friction, wear and lubrication. Friction occurs when two solids are in contact with each other and their movem...

Friction in journal bearings (TM 282)

fundamentals of hydrodynamic lubrication Description: There are many factors that influence the friction states in a hydrodynamic journal bearing. Speed, load and viscosity of the lubricant used are focused on in...

Abrasion Tester For Natural Stone/Tile to UNI & ISO (LAG650)

To UNI EN ISO 1338 – 1339 – 1342 – 14157 Dimensions: 560mm x 620mm x 1000mm Power: 0.25 Kw Weight: 90kg Laboratory instrument to determine the resistance to deep abrasion in cement, concrete and natural stone obt...

GENERAL Purpose and EN 772-1 Automatic Compression Testing Machines for Masonry Units/Blocks, Cubes and Cylinders (UTC-4714GE.FPR)

• Manufacturer: Labequip

AUTOMATIC Compression Testing Machines Product Codes: 4714GE.FPR 4729GE.FPR 4739GE.FPR 4714GE.FPR-N 4729GE.FPR-N 4739GE.FPR-N Description: UTC-4714GE.FPR, UTC-4729GE.FPR and UTC-4739GE.FPR model Automatic Compres...

Relative Density Test Set (UTS-0670A-C)

• Manufacturer: Labequip

Compacted Road Base and Subbase Soils Product Codes: Relative Density Test Set ASTM is used for the determination of the relative density of cohesionless soil for which impact compaction will not produce a well-d...

EN 12390-4 Compression Testing Frames with Four Column for Cubes and Cylinders (UTC-6727)

• Manufacturer: Labequip

Compression Testing Frames Product Codes: Description: UTC-6727, UTC-6737, UTC-6748 and UTC-6758 compression testing frames with four columns for cubes and cylinders consist of a loading cylinder assembly, lower ...

GENERAL Purpose Testing Frames for Cubes and Cylinders (UTC-4713G)

• Manufacturer: Labequip

Compression Testing Frames Product Code: Description: General purpose testing frames for cubes and cylinders consist of a rigid welded steel walls, a loading cylinder assembly and Ø 216 mm or Ø 300 mm a lower and...

EN 12390-4 – EN 772-1 Automatic Compression Testing Machines with Welded Walls for Masonry Units, Cubes and Cylinders (UTC-5729.FPR)

AUTOMATIC Compression Testing Machines Product Codes: Description: UTC-5729.FPR and UTC-5739.FPR models Automatic compression Testing Machines are manufactured for compression testing of masonry units, cubes and ...

Profometer PM-630 Rebar Detector (UTC-2092)

• Manufacturer: Profometer

Protection and Repair of Concrete Structures (NDT) Hardened Concrete Testing Description: Profometer PM-630 Rebar Detector is an advanced cover meter to detect location of rebars, measurement of concrete cover an...

UTEST Software (USOFT-4930.FPR)

• Manufacturer: UTEST

Compression and Flexural Machines Product Code: Description: The Automatic Compression/ Flexure Testing Machine can be controlled (Start, stop commands) by a computer with the software USOFT-4930.FPR (given free ...

EN 12390-4 Compression Testing Frames for Cubes and Cylinders (UTC-5727)

• Manufacturer: UTEST

Compression Testing Frames Product Codes: Description: UTC-5727 and UTC-5737 compression testing frames for cubes and cylinders consist of rigid welded steel walls, a loading cylinder assembly, lower and upper (s...

GENERAL Purpose and EN 772-1 Compression Testing Frames for Masonry Unit Blocks, Cubes and Cylinders (UTC-4714GE)

• Manufacturer: Labequip

Compression Testing Frames Product Code: Description: UTC-4714GE, UTC-4729GE and UTC-4739GE, general purpose testing frames for masonry units/blocks cubes and cylinders consist of a rigid welded steel walls, a lo...

EN – Automatic Four Column Compression Testing Machines for Cubes and Cylinders (UTC-6727.FPR)

• Manufacturer: Labequip

AUTOMATIC Compression Testing Machines Product Codes: UTC-6727.FPR, UTC-6737.FPR UTC-6747.FPR and UTC-6757.FPR models Automatic Four Column Compression Testing Machines are manufactured for compression testing of...

Impact test, 25Nm (WP 400)

Charpy notched-bar impact test Description: In the field of industrial quality control, the impact test is a widely used test method with which to quickly and easily determine characteristics for a material or co...

Creep rupture test (WP 600)

typical phenomena of creep processes Description: Components that are subjected to long-term constant loads deform plastically. This material behaviour is called creep. The creep rupture test is a destructive tes...