Used controller

Tekcast Tek18 Refurbished Front Loading Spin Casting Machine Fishing Lures Sinkers Lead Jig heads

• Manufacturer: Tekcast

This is a Refurbished Tekcast 9/12/15/18 Inch Front Loading Spin Casting Machine for rubber mold spin casting of Lead or Pewter... Cast Fishing Lures, Jigs, Sinkers or Jewelry. This machine can cast 9" 12" 15" ...

Pump belle & gossett model 104306 bell & gossett ecocirc xl 55-45 cast iron circulator #38920

• Manufacturer: Belle

Pump Belle & Gossett Model 104306 Bell & Gossett Ecocirc XL 55-45 Cast Iron Circulator 104306 Bell & Gossett Ecocirc XL 55-45 Large Wet Rotor Circulator with 1/2 horsepower, 208-230/1/60. The newly expanded ecoci...

Degassing unit FOSECO

• Manufacturer: Foseco

Dimensions: Length: 1350mm; Width: 1160mm; Height: 2050mm 400V; 50Hz; 1,6kW; 540rpm With CE label on the machine For crane suspension

2018 Mixing plant for core sand LORAMENDI 6t/h

• Manufacturer: Arena

Consisting of: -1 Sand bunker -1 Temperature control system 4.8t/h -1 Weighing hopper -1 Core sand mixer LORAMENDI; MDR1,5 150kg / filling; 90s mixing time / filling -2 Dosing tanks for resin and hardener -2 Tank...

Degassing unit PMC

• Manufacturer: PMC

Dimensions: Length: 2000mm; Width: 900mm; Height: 3160mm For aluminium Control board Gas supply via rotameter 0.18kW; 230V; 1.7A; 50Hz On wheels

Returner of moulding boxes VETTER 6t

• Manufacturer: Vetter

Dimension: lenght: 1220mm; width: 450mm; height: 850mm With control unit With 2 chains With crane eye

FLOWSERVE 68-3585 CAST IRON IMPELLER T213509

• Manufacturer: Flowserve

Extra Information Brand: FlowServe MPN: 68-3585 Shipping Weight: 9 LBS Shipping Dimensions: 9 (in) × 9 (in) × 4 (in)

GOULDS R101-508 CAST IRON IMPELLER PUMP T213815

• Manufacturer: Goulds

Extra Information Brand: Goulds MPN: R101-508 Shipping Weight: 14 LBS Shipping Dimensions: 14 (in) × 14 (in) × 8 (in)

Gassing unit LAEMPE G3-C-1 3KW

• Manufacturer: Laempe / Röperwerk

Dimensions: Length: 1100mm; Width: 520mm; Height: 2070mm

1987 Carousel core shooter, 4 stations, RÖPER, 16 l

• Manufacturer: Laempe / Röperwerk

Electric heating 20 s /core For core box 510 mm x 760 mm, h. 400 mm With horizontal and vertical seal Turning table with 4 tightening mechanisms in aluminium

Wire injection machine HOCHREUTER

Motor SEW 3,7 hp; 3250/190 rpm at the exit, 300 V With SIEMENS control S5-100 U With impulse generator

Turntable coreshooter Röper D1A/CO-CB

• Manufacturer: Laempe / Röperwerk

Dimensions: Width: 1950mm; depht: 2500mm; hight: 1850mm 2,5KW; 400V; 50Hz corbox dimensions: lenght: 300; width: 75/ 75 mm; hight: 285mm

Contenti 18 Inch Spin Casting Machine Cast Pewter Metal Car Emblems Large Reproductions 110 V

• Manufacturer: Contenti

This is a Contenti 18 Inch Spin Casting Machine - Model # 175130 - Serial #175130 - 110 Volts - 12 Amps - 60 Hz - Single Phase PTWS - 02192023-LR-20 Picture# 02102023 * All information deemed accurate but may...

Cast Iron Vintage Steel Legs Steam Punk original 1940 Era Made in the USA 2 in a set

This is a set of Original Cast Iron Vintage Steel Legs Steam Punk 1940 Era. - Made in USA - Two in a set - Original, not a reproduction - We have many available! PTWS - 03192023-LR-3 Picture# 02222023 * All i...

12 Inch Spin Casting Machine for Fishing Lures Jigs and Lead Sinkers

This is a 12 Inch Spin Casting Machine for Fishing Lures Jigs and Lead Sinkers - Baldor Single Phase Motor: - 1/3 Hp - 115/208-230 Volts - 6/3.2 - 3 Amps - 1725 RPM - 60 Hz PTWS - 01082023-LR-21 Picture# 01042...