Used controller in Wallonia, Belgium

1999 Gazing unit LÜBER LW FDA 3250 32 kW

• Manufacturer: Lüber

32kW; 400V; 50Hz Dimensions: Lenght: ±1500mm; Width: ±900mm; Hight: ±1800mm The control for the gazing cycle is controled by the core shooter the unit is equiped by a smal amin vessel (±2l) with connection to a c...

Casting ladle motorized 20t, IBW

• Manufacturer: IBW

With motorized tilting and remote control With intermittend gear (manual gearbox) frequency controlled With counterweight on the overside With mechanical switch to "tilting by hand" With useable lining and 2 pour...

2006 Motorized casting ladle, 14t, IBW

Vessel: depth: ø1750 mm, h. 1630 mm Height of the hook ±800 mm With motorized tilting and remote control With manual gearmotor, frequency controlled With counterweight on the overside With mechanical switch to "t...

Screw mixer AXMANN 5 t/h

• Manufacturer: Axmann

External dimensions: length 2570mm, width 1000mm, height 2150mm Maximum output 5 t/h With 2 gear pumps drived by direct current motors controlled by potentiometer With Relais control board in the machine base Wit...

Water press pump for lining spayer

• Manufacturer: GRUNFOS

With surge tank 100 l and control box Weight: ± 200 kg | Motor: 1,5 kW, 2900 rpm, 240/415 V | Pressure: up to 15 bar, 4 m³/h

Lance for temperature measurement SIDERMES

With charger and test equipment For control elements 400 mm

2006 Pneumatic sand feeder, 75 l

With sand pipe bend With control equipment, 24 V Weight: ± 80 kg | Dimensions: width 1000mm, depth 800mm, height 1000mm | Contenance: 75 l | Working pressure: 8 bar

2000 Gassing unit LÜBER LW FDA-16401i, 16kW

• Manufacturer: Lüber

Dimensions: Length: 1100mm; Width: 1000mm; Height: 1863mm With heating 16 kW With contactor control and stainless-steel storage tank 30 litres Compressed air control via proportional valve With micropump, gas dos...

Scrubber ARASIN GKOV 100 6.000 m³/h

Year of manufacture 1988 This unit consists of: Scrubber 6000 m³/h Air circulation pump New control box SIEMENS tia Protal Collecting tank around the scrubber Dust filter in the pipeline fresh acid pump New PH co...

Molding machine ZIMMERMANN G1

• Manufacturer: Zimmermann

Serial number: 157118Dimensions: 750 mm x 1060 mm x 1710 mmPressing pressure: 4000 kg at 6 barJolt capacity: 200 kgBox size: 750 mm x 550 mmPress stroke: 100 mmLifting stroke: 200 mmUseful height: 500 mmWith SIEM...

Furansand mixer BORDEN ± 3 t/h

Motor LEROY SOMER, type: LS 132M1, serial number: 320823 4 kW, 965 rpm, 220/380 V This machine is without stand, turnable, pumps and control unit It has a sandhopper with 4 wheels to file coreshooter It is possib...

Reclaiming plant for furan sand OMEGA

• Manufacturer: Omega

400V; 50Hz; 250A Consisting of: - sand breaker - 2 sand conveyors - 1 small hopper - 1 bucket elevator - vibrating conveyor pipe - magnetic separator - 2 × attrition unit - Fluid bed deduster - 1 large silo - Con...

Ladle heating station PROMEOS

• Manufacturer: Prometeos

Serial number: 00131010360µYear of construction: 2013 Dimensions: Length: 2000mm, Width: 2200mm; Height: 2600mm Made for siphon pans Burner insert 600mm For natural gas H; 10 ±0,05Wh/m³ Each machine has an operat...

Moulding machine OSBORN, type 719 RF

Machine jolts under pressing Overhauled with new twohands control

2013 Screw mixer OMEGA / Spartan 305 P, 5 - 6 t/h

• Manufacturer: Omega

External dimensions: length 2940mm, width 750mm, height 2200mm Motor: 4 KW, 220/380 V , brand BONFRIGLIONE, drive motor, 1440rpm outlet 1390mm With pneumatic sand inlet clap With 2 controlled pumps With programma...