- Trusted Seller
Screw mixer BORDEN, ± 2 t/h with 2 hoppers
With sand hopper, 2 compartments, contenance total ± 2,2 m³ on feet With extraction screw With additive bunker ± 0.22 m³ Wiht dosing screw and impeller The large bunker has 4 pneunamtic metering sliders The meter...
Amel, Belgium - Trusted Seller
2006 Green sand mixer WEBAC with accessory, 28 t/h
- Manufacturer: Webac
The capacity depends on the quality of the bentonite and of the sand Three-phase-motor, type 280M4 2 mixing runners Accessories: -water control SENSOR CONTROL FRS-M -sand scale -elevator -injection system
Amel, Belgium - Trusted Seller
Core shooter RÖPER H25 completely hydraulic
- Manufacturer: Laempe / Röperwerk
Shot volume 25l Dimensions (without cabin): Width: 2560mm; Depth: 2000mm; Height: 2800mm With cabin Hydraulic table With hydraulic side clamping With core extraction slide and ejector With hydraulic unit 30bar; 4...
Amel, Belgium - Trusted Seller
Sand conveyor 350 l, OFFICINE
Year of construction: 1996, Weight : ± 250 kg Konus in good condition With switch panel With pneumatic control valves Ø entry 250mm, Ø exit 90mm With pressure control valve, with additional accelerator at the exit
Amel, Belgium - Trusted Seller
2000 Gassing unit LÜBER LW FDA-825, 8kW
- Manufacturer: Lüber
- Model: LW-FDA 825
With heating 8 kW With contactor control and stainless-steel storage tank 30 litres Compressed air control via proportional valve With micropump, gas metering via rotameter Suitable for central amine gas supply (...
Amel, Belgium - Trusted Seller
2000 Gassing unit LÜBER LW FDA-825, 8kW
- Manufacturer: Lüber
- Model: LW-FDA 825
With heating 8 kW With contactor control and stainless-steel storage tank 30 litres Compressed air control via proportional valve With micropump, gas metering via rotameter Suitable for central amine gas supply (...
Amel, Belgium - Trusted Seller
2000 Gassing unit LÜBER LW FDA-825, 8kW
- Manufacturer: Lüber
- Model: LW-FDA 825
With heating 8 kW With contactor control and stainless-steel storage tank 30 litres Compressed air control via proportional valve With micropump, gas metering via rotameter Suitable for central amine gas supply (...
Amel, Belgium - Trusted Seller
2000 Gassing unit LÜBER LW FDA-825, 8kW
- Manufacturer: Lüber
- Model: LW-FDA 825
With heating 8 kW With contactor control and stainless-steel storage tank 30 litres Compressed air control via proportional valve With micropump, gas metering via rotameter Suitable for central amine gas supply (...
Amel, Belgium - Trusted Seller
2000 Gassing unit LÜBER LW FDA-825, 8kW
- Manufacturer: Lüber
- Model: LW-FDA 825
With heating 8 kW With contactor control and stainless-steel storage tank 30 litres Compressed air control via proportional valve With micropump, gas metering via rotameter Suitable for central amine gas supply (...
Amel, Belgium - Trusted Seller
2000 Gassing unit LÜBER LW FDA-825, 8kW
- Manufacturer: Lüber
- Model: LW-FDA 825
With heating 8 kW With contactor control and stainless-steel storage tank 30 litres Compressed air control via proportional valve With micropump, gas metering via rotameter Suitable for central amine gas supply (...
Amel, Belgium - Trusted Seller
Sand conveyor GFA, 500 l
Year of construction: 1987, weight: 450 kg Ø entrance 150 mm, Ø exit 100 mm Entrance wiht butterfly valvefollowed by a cone valve With pneumatic control valves With high and low level probe Low level with pressur...
Amel, Belgium - Trusted Seller
Sand conveyor GFA, 500 l
Year of construction: 1987, weight: 450 kg Ø entrance 150 mm, Ø exit 100 mm Entrance wiht butterfly valvefollowed by a cone valve With pneumatic control valves With high and low level probe Low level with pressur...
Amel, Belgium - Trusted Seller
Hydraulic separating wedge DISA TK-3/300
- Manufacturer: DISA
With control panel With spring balancer Max working pressure: 300bar | Stroke of the wedge: 100mm | Jaws lenght: 265mm | Min wedge tip retracted: 26mm | Max wedge tip extended: 48mm | Cutting force: 20500daN | Hy...
Amel, Belgium - Trusted Seller
Pneumatic Hammer HITACHI, HS5
- Manufacturer: Hitachi
With pneumatic 2 hand control Weight: 400 kg | Dimensions: length 1900mm, width 540mm, height 560mm | Shot axis: Ø 100mm | Air pression: 6 bar | Force of impact: 2805 Joule
Amel, Belgium - Trusted Seller
Screw mixer GFA, ± 3 - 4 t/h
Motor mixer ATT; 7,5 kW, 220/380 V, 970 rpm With motor for pumps, with manual gear box With bunker, electrical control unit With brake for pneumatic cylinder on the rotation With sensor for door closer Control SI...
Amel, Belgium

