Used controller in Wallonia, Belgium

Mixing and transport screw, 1350/120mm

External dimensions: length 2350mm, width 300mm, height 300mm Motor: 1,1 KW, 380 V, brand BAUER, 50 Hz, type drive motor, 44 rpm With sensor for rotation control

Sand conveyor 170 l, R.DEBUS

Input Ø 210 mm, output Ø 100 mm, with pressure controller Filling system by cone, max. temperature 200°C, pressure 6 bar, content 170 l With compressed air accelerator on the bottom

Ultrasonic cleaning bath 4L

• Manufacturer: Elma Transsonic

Extern dimensions: Profondeur: Ø300mm; Hauteur: 280mm Usable dimensions: Profondeur: 230mm; Hauteur: 130mm With ascillation controller HF 50KHZ Using contanence 4L ; With cable, plug and swith

1973 Shell moulding machine SHALCO U900

External dimensions: length 3900 mm, width 1900 mm, height 2100 mm 700/13 rpm, 1410/27 rpm Without control panel With belt outlet With hydraulic unit (400 V, 15 kW)

Gassing unit BORDEN BETASET 10

External dimensions: 850 mm x 570 mm, h. 1500 mm; feet: 360 mm Three-phase motor 220 V With control box, emergency stop switch and heating, 3500 W; 220/380 V

2012 Gravity die casting machine IMR C40H

• Manufacturer: IMR

Dimensions: Length: 2170mm; Width: 1916mm; Height: 1660mm 6KW; 380V; 50Hz With 2 divided dip tanks With light barriers With SIEMENS control Pressure 45-55bar

Core shooter LAEMPE L10 cold-box

• Manufacturer: Laempe / Röperwerk

Dimensions: Length: 2800mm; Width: 2300mm; Hight: 2040mm vacuum-clamping plats 410×200mm, with gazing plate, core extraction slide cabine, hydraulic unit and vacuum pumps, control board

Core sand mixing plant STEFFENS, type SM30

Boltmixer, fastmixer Volume testing device for sand With 2 pumps With control board SIEMENS S5 With powder support With pneumatic depletion flap Spare mixer (second-hand) With cleaning flap

Pneumatic slag gripper

Dimensions: 1000mm; Width: 860mm; Height: 2400mm On stand With crane eye Pneumatically controlled (connections above) All existing jaws are supplied 2 different models for casting flat jaws and square jaws

Sample grinder, with cup grinding stone HERZOG

• Manufacturer: Herzog

Dimensions: length: 850mm, width: 900mm; height: 1600mm With swiveling clamping device Head is fixed, height adjustable by hand wheel With water pump With emergency stop With control cabinet and operator panel Ma...

Ladle heater, gas propane, SARGI

2 kW, 3 x 380 V With ventilator ±400 m³/h, 1 kW, 2900 rpm, 220/380 V Hi is e side ladle heater /pannel 1000x1000 mm. with control board and timer

Screw mixer for chemical sand, 2 - 3 t/h

For chemical sand With 2 new hand adjusted pumps, with new control cabinet With new motor, 4 kW, 700 rpm, 220/380 V With pneumatic slider, adjustable opening

Transport and dosing worm screw, useful length 1000, Ø 150mm

Gearmotor LEROY SOMER, 1,1 kW, 910/33,3 rpm, 220/380 V Direct drive in line Inlet 140 x 140mm With control and drain cleaning cover under Ø 150mm Outlet Ø 150mm

NEW gassing units LÜBER LW-FDA 425

• Manufacturer: Lüber
• Model: LW-FDA 415

With heating 4 kW Max core weight 15 kg (± 10 l) With contactor control With stainless feeder tank 30 l Compressed air connector 1" With micro pump, gasdosing by rotameter Compressed air regulation by proportiona...

Greensand cooler SIMPSON MC, 135 t/h

cooler drive 75 kW ventilator 37 kW 24000 m³/h pression 400 mm WC electric control by PLC Siemens S5 and water dosing water inlet 100 l/min pression 3-6 bar