Machine Tools » Machining Centers » St. Gallen

Building Filters

Related Events

Live Now

Complete Plant Closure - Assets from a Leading Agricultural Blade Plow and Tillage Tool Manufacturer

by Perfection Global, LLC

Online
Ends Jan 20th, 16:00 CST
View event
26

Used Machining Centers in St. Gallen, Switzerland

  • Trusted Seller
    2004 DMG DMU 200 P

    2004 DMG DMU 200 P Ref No: 48443

    • Manufacturer: DMG Mori
    • Model: DMU 200

    Equipment: - Infrared measuring probe Heidenhain TS 641 - Coolant tank 900 l - IKZ 40 bar through spindle center (AD) - rotating lens - Electronic handwheel - 3D path control Optional: - hyd. Clamping system (Stark)

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2016 MAZAK VTC800/30SLR Ref No:

    2016 MAZAK VTC800/30SLR Ref No: 53585

    • Manufacturer: Mazak
    • Model: VTC 800

    further options • Air blowing out of the workpiece • High pressure 15 bar through spindle • Mazak Monitoring B (Renishaw RMP60) • Tool length measurement x2 Table centre partition • NC rotary table, 360,000 posit...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2011 DMG DMU 50 Ref

    2011 DMG DMU 50 Ref No: 53752

    • Manufacturer: DMG Mori
    • Model: DMU 50

    No cooling system; the machine is connected to a central cooling system. 17,153 operating hours, 2,940 spindle hours

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2016 MAZAK FJV 35/60 Ref

    2016 MAZAK FJV 35/60 Ref No: 51124

    • Manufacturer: Mazak
    • Model: FJV-35/60

    Machine comes without coolant system but with a high-pressure pump. The magnetic plates are not included but can be purchased if you are interested. Includes precisely calibrated and ready-to-use Brankamp monitor...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2005 MIKRON UCP 600 Ref

    2005 MIKRON UCP 600 Ref No: 43579

    • Manufacturer: Mikron
    • Model: UCP 600

    Equipped with: - ATC 220 KSK-A63 - 7 compartment pallet changer system 3R - Tool magazine with 220 tool slots

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2005 CHIRON MILL 2000 HIGH

    2005 CHIRON MILL 2000 HIGH SPEED Ref No: 50115

    • Manufacturer: Chiron
    • Model: MILL 2000

    including chip conveyor Duty cycle 53'700h Spindle hours 26'400h Tool holder 5 pieces The following auxilliaries can be bought seperately at additional cost: Röhm double clamps Torsion springs for tool holders ...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2018 DMG CMX 600 V

    2018 DMG CMX 600 V Ref No: 55699

    • Manufacturer: DMG Mori
    • Model: CMX 600 V

    The machine has 10,700 operating hours and 1,600 spindle hours, of which approximately 1,000 hours were warm-up time. The vise can be purchased separately for an additional charge. The machine is equipped with ...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2012 CHIRON FZ 12K W

    2012 CHIRON FZ 12K W HIGHSPEED Ref No: 53173

    • Manufacturer: Chiron
    • Model: FZ12

    - Shuttle table machine - Knoll (KSS) watertank FKA/350 (2011) - Highspeed plus package - - Renishaw probe, with a Chiron Lasercontrol System F1000 and with a workpiece support control - Peisseler AWU 160P rotary...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2009 DMG HSC 20 LINEAR

    2009 DMG HSC 20 LINEAR Ref No: 55887

    • Manufacturer: DMG Mori
    • Model: HSC 20 LINEAR

    Equipment: - Renishaw Laser System NC-4 III - 3D quick SET - Renishaw OMP-400 Infrared Probe - Coolant system - Automation with drawers - Through-spindle compressed air

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2005 CINCINNATI CFV 550 I

    2005 CINCINNATI CFV 550 I Ref No: 55858

    • Manufacturer: Cincinnati
    • Model: CFV550I

    Object: 55858 | Controls: HEIDENHAIN I TNC 530 | Number of processing axes (excl parallel axes): 4 | X-axis travel: 540 mm | Y-axis travel: 540 mm | Z-axis travel: 560 mm | Table surface (left-right): 700 mm...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2002 KAO MING KMC-1800 DV

    2002 KAO MING KMC-1800 DV Ref No: 55439

    • Manufacturer: Kao Ming
    • Model: KMC-1800DV

    Features: - Grid panel 40/40 (1120x1800) - Operating hours approx. 22,000h (20h/week)

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2017 DMG MORI NHX 5000

    2017 DMG MORI NHX 5000 Ref No: 51783

    • Manufacturer: DMG Mori
    • Model: NHX 5000

    Accessories - Chip conveyor Object: 51783 | Controls: SIEMENS 840 D CELOS | Number of processing axes (excl parallel axes): 4 | X-axis travel: 730 mm | Y-axis travel: 730 mm | Z-axis travel: 880 mm | Rotating ...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2013 HAAS VF5/50 Ref No:

    2013 HAAS VF5/50 Ref No: 50090

    • Manufacturer: Haas
    • Model: VF-5/50

    Object: 50090 | X-axis travel: 1270 mm | Y-axis travel: 660 mm | Z-axis travel: 635 mm | Spindle revolutions (max): 7500 /min | Number of spindles: 1 | Number of turrets: 0 | Live positions: yes | Number of ...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2021 DMG MORI NHX 5000

    2021 DMG MORI NHX 5000 Ref No: 51794

    • Manufacturer: DMG Mori
    • Model: NHX 5000

    Accessories - Chip conveyor Object: 51794 | Controls: SIEMENS 840 D CELOS | Number of processing axes (excl parallel axes): 4 | X-axis travel: 730 mm | Y-axis travel: 730 mm | Z-axis travel: 880 mm | Rotating ...

    Niederhelfenschwil, Switzerland
  • Trusted Seller
    2003 DMG DMU 50 M

    2003 DMG DMU 50 M Ref No: 53751

    • Manufacturer: DMG Mori
    • Model: DMU 50

    26,000 operating hours, 3,812 working hours Object: 53751 | Controls: HEIDENHAIN | Number of processing axes (excl parallel axes): 3 | X-axis travel: 500 mm | Y-axis travel: 400 mm | Z-axis travel: 400 mm | Ta...

    Niederhelfenschwil, Switzerland
12