Used Dump Trailers in Mecklenburg-Vorpommern, Germany

2026 Krampe HP 20 Carrier

• Manufacturer: Krampe
• Model: HP 20 CARRIER

Loading volume: 12,1 m³ | Tyre equipment: 650/65R26.5 | Number of axles: 2

2026 Meiller Stahlmulde MHKS 41/3-S, Schütte, Liftachse

• Manufacturer: Meiller
• Model: MHKS41/3

ABS EBS Air suspension According to our "General Terms and Conditions" without any warranty, we can offer you the following vehicle today on a non-binding basis until conclusion, error, typographical error & stoc...

Oehler OL ZDK 180 U Dreiseitenkipper

• Manufacturer: Oehler

Compressed air brake system: Yes | Tyre equipment: 560/ 45 R22.5 | Construction type: three-side | Place-upon attachments: Steel | Tarpaulin: Yes | Number of axles: 2

Conow tilting bridge with wide-wall superstructure 80 cm high, variant 2.1

• Manufacturer: Conow

Floor panel 4 mm thick Profiled laser-welded drop sides Front and rear wall and right-hand side are firmly welded to the tipper body Left-hand full-length pendulum dropside with full-length central locking, opera...

Conow tipper bridge with body 95 / 90 cm high

• Manufacturer: Conow

- left side tiltable (on request tiltable to the right side) - left sides with longitudinally divided profiled laser-welded drop sides, - left side is equipped with upper pendulum drop side and lower drop side - ...

Conow tipper bridge with combined body 95 / 90 cm high

• Manufacturer: Conow

- left side tiltable (on request tiltable to the right side) - right side with continuous side wall firmly welded - the left side with two longitudinally divided drop sides reinforced by 3 vertical - by 3 vertica...

Conow HW 60 V2.5

• Manufacturer: Conow

- Tilting bridge with wide wall structure 95 cm high - tiltable on both sides with two center stanchions - front and rear walls are firmly welded to the tipper body - both sides with pendulum tailboards, center s...

Conow HW 80 V4

• Manufacturer: Conow

Tipping bridge with multi-purpose superstructure V4 - tipper bridge with wide wall body 120 cm high - left side tiltable (or right side tiltable on request) - left side with two pendulum drop sides, middle stanch...

Conow HW 80 V4.2.3

• Manufacturer: Conow

- Tipping bridge with combined superstructure suitable for transporting chaff and grain - body 120 cm high with 40 cm extension - tiltable to the left (on request also tiltable to the right) - profiled laser-weld...

Conow HW 60 V3.2

• Manufacturer: Conow

- Tipping bridge with combined superstructure 95 cm high - front, rear and one side wall are each continuous drop sides and are firmly welded to the tipping body - the other side wall can be opened completely via...

Conow

• Manufacturer: Conow

Conow HW 80 V3.2

• Manufacturer: Conow

Tipping bridge with combined superstructure 95 cm high - tiltable to the left (tiltable to the right on request) - front, rear and one side wall are continuous drop sides and firmly welded to the tipping body - t...

Conow HW 80 V1

• Manufacturer: Conow

- Tipping bridge with superstructure - tiltable on both sides - 2 x front/rear wall below - 2 x front/rear wall above - left and right side walls divided lengthwise - upper drop side is pendulum mounted - the low...

Conow HW 80 V4.1.3

• Manufacturer: Conow

- tipping bridge with combined superstructure 160 cm high - tiltable to the left (tiltable to the right on request) - profiled laser-welded drop sides, 2, 5 mm thick, QSTE 380 - inside and outside 3-sided double ...

Conow HW 80 V4.1

• Manufacturer: Conow

Tipping bridge with combined superstructure V4.1 - Tipping bridge with combined superstructure 120 cm high - tiltable to the left (tiltable to the right on request) - end wall and rear wall are continuous drop si...