Used Directional Drilling in Spain

Stems for directional drilling

For pilot hole guidance.

SEGOQUI PH-220

Rotary drilling machines for horizontal boreholes, for collectors, water and gas sewerage, cable, etc. These machines, which allow simultaneous drilling and laying of the metallic pipe, can work for different dia...

Steerable systems

For horizontal rotary drilling. Directional tube to correct the drilling, consisting of a steerable tube, formed by hydraulic cylinders and two inclination sensors, as well as a small computer where the operator ...

SEGOQUI 07

• Manufacturer: talleres segovias.l

Drilling rigs designed for specific geothermal works, mounted on a tracked carriage, and equipped with a mobile rod magazine, upper and lower rubber stoppers for detritus collection, and very fast maneuvering and...

THD-20 DRIVING EQUIPMENT FOR DRAINS 20 METERS OF TRAVEL

Machine to execute wick drains, with 20 meters of useful stroke. It is a mast that can be coupled to a basic backhoe, and can perform around 5,000 linear meters / day of drains. The equipment is designed to nail ...

THD-20

Machine to execute wick drains, with 20 meters of useful stroke. It is a mast that can be coupled to a basic backhoe, and can perform around 5,000 linear meters / day of drains. The equipment is designed to nail ...

Helices

• Manufacturer: talleres segovias.l

For both hard ground (cutting tools) and soil (teeth), in diameters ranging from 400mm to 2,500mm, in special and anti-wear steels, with replaceable teeth and cutting tools.

STAFFA CFA

• Manufacturer: Staffa

Rotation table for CFA continuous propeller. STAFFA brand, made in Italy, 150mm hexagonal cup coupling. to make piloting with continuous propeller. We export and transport all over the world. New located in Colom...

CPI 7 Tools and Sludge Equipment

6-meter bentonite tanks (12 units) 12-meter bentonite tank (2 units) Auger (propeller) Ø980mm, two inlets with prongs, Kelly box 200x200mm (1 unit) Auger (propeller) Ø850mm, two inlets with prongs, Kelly box 200x...

SOILMEC SM-103 Long Mast

• Manufacturer: Mast Explorer
• Machine weight: 5.3 kg

Rated power: kW (CV) 47 @ 2300 rpm | Maximum width: mm 1,100 | Tile width: mm 200 | Maximum nominal torque: daNm 917 | Maximum speed: 348 rpm | Maximum shot: kN 61 | Career: mm 2330 | Maximum shot (1st layer): k...

SOILMEC CM-40J

• Manufacturer: Soilmec
• Machine weight: 35 kg

Rated power: kW (HP) 132 (177) @ 2500 rpm | Maximum width: mm 2500/3800 | Tile width: mm 600 | Maximum nominal torque: daNm 2400 | Maximum speed: 191 rpm | Maximum shot: kN 100 | Career: 18500 mm | Maximum shot ...