Used Presses in Saxony, Germany

KEMPFLE VA 200/4

• Manufacturer: KEMPFLE
• Capacity: 4 mm / for steel / steel 400 Nm/mm^2
• Stroke: 60 per minute

Control type: conventional | Freight basis: EXW - ex works (free loading) | Work table size/ table size: 1000 x 800 mm | Performance/ capacity: 4 mm / for steel / steel 400 Nm/mm^2 | Number over/ strokes: 60 per...

1989 PRESSOTECHNIK GMBH PC 50.08

• Manufacturer: PRESSOTECHNIK GMBH
• Stroke: about 150 mm

Manufacturer: PRESSOTECHNIK GMBH Type: PC 50.08 Year of manufacture 1989 Pressing force: 500 kN (50 t) Pneumohydraulic press, C-frame press used Dimensions approx. 1600 x 600 x 2050 mm Subject to changes and erro...

WEPOMA 13005.66

• Manufacturer: WEPOMA

Table approx. 900 x 450 mm connected load 1,5 kW Swivel press, punching press used 380 V Total approx. 1000 x 1100 x 1500 mm The press can be used for punching out seals, rubber, leather, contours etc. Subject to...

1990 Ona Pres PYZT1200

• Manufacturer: ONAPRES

1990 Ona Pres PYZT1200 4-column hydraulic press Ona Pres Ona Pres PYZT1200 Year of construction:1990 Lifting height:700mm Pressing force :1200 to 12000 KN Machine depth in foundation:3.65 m Table size:1...

2010 Vetch

• Manufacturer: Wicke

Press-in and marking station The workpieces are processed using the following steps. Manually place the workpiece in the holder and secure it with a clamping lever. Manually insert the notched pin into the mandre...

WMW Press

• Manufacturer: WMW

Hydraulic press WMW ZEULENRODA PYE 10x250 Total power requirement: 1.6 kW Machine weight approx: 1,1 t Space requirement approx: 1100 x 650 x 2050 mm Installation height: 500 mm Table size: 400 x 450 mm

PAGUS manual spindle press

• Manufacturer: Pagus

Manual screw press, screw press, mandrel press, mandrel press PAGUS Table diameter: Ø 65 mm, center bore: Ø 20 mm spindle diameter: Ø 20 mm, tool holder: M12 x 1.75, length: 8 mm used, tested !

PAGUS hand lever press

• Manufacturer: Pagus

Hand lever press, mandrel press, rotary mandrel press PAGUS Table diameter: Ø 41 mm, tool holder: Ø 14 mm ram diameter: Ø 19 mm, tool holder: Ø 6.0 mm various accessories used, tested !

PAGUS manual spindle press

• Manufacturer: Pagus
• Stroke: 25 mm

Hand screw press Thrust: probably approx. 6000 kg | Table surface: 390 x 250 mm | Spindle diameter: Ø 40 mm | Ram stroke max: 25 mm | Removal table plunger: 55 mm | Discharge: 100 mm | Dimensions: 440 x 390 x 510...

HSV hand lever press

Hand lever press, mandrel press, rotary mandrel press HSV, SCHÄFER MASCHINEN- UND ANLAGENBAU Type H3 Table diameter: Ø 70 mm, tool holder: Ø 12 mm with adapter: Ø 20 mm, length: 66 mm, tool holder: Ø 8 mm Plunger...

PAGUS manual spindle press

• Manufacturer: Pagus

Manual spindle press used, tested ! Pressure performance: 10 t | Passage between the stands: 450 mm | Installation height: 300 mm | Wheel inner diameter: Ø 1500 mm | Table size: 450 x 400 mm | Space needed: 1,400...

PAGUS manual spindle press

• Manufacturer: Pagus
• Stroke: 230 mm

Manual screw press, without swing arm PAGUS used, tested !

HSV hand lever press

Hand lever press, mandrel press, rotary mandrel press HSV, SCHÄFER MASCHINEN- UND ANLAGENBAU Type H3 Table diameter: Ø 70 mm, tool holder: Ø 12 mm with adapter: Ø 20 mm, length: 66 mm, tool holder: Ø 8 mm Plunger...

SPM manual spindle press

Manual spindle press, Balance SPM YB-3 Pressure max: 20.000 kg | Width between stands: 380 mm | Hub: 200 mm | Greatest height: 320 mm | Table bore: Ø 76 mm | Balanced meter: Ø 1450 mm | Table: 1120 x 1120 mm | Di...

PAGUS manual spindle press

• Manufacturer: Pagus
• Stroke: 17 mm

Manual screw press PAGUS used, tested ! Ram stroke max: 17 mm | Discharge: 140 mm | Spindle diameter: Ø 11 mm | Internal spindle thread: M6 | Removal table plunger: 44 mm | Table surface: Ø 25 mm | Tool holder in...