DAVIS STANDARD 165MM60TPIH 6.5″ EXTRUDER 10869
- Manufacturer: Davis-Standard
Davis Standard model 165MM60TPIH, S/N X7206 27:1 L/D 150HP DC motor 100RPM screw speed 526HP rated gearbox with a 1.5 service factor. No feed throat, no control panel. Water cooled barrel. Last used as a secondar...
Elk Grove Village, IL
NRM / DAVIS STANDARD 1.5″ 16125
- Manufacturer: Davis-Standard
NRM / Davis Standard 1.5″ Pacemaker IV extruder, S/N 19218, S/O 52660. 24:1 L/D air cooled electrically heated barrel with a 42″ to 44-3/4″ adjustable centerline. Driven by a 10 HP 1750/2300 RPM DC motor with Rel...
Elk Grove Village, IL
Rebuilt Davis-Standard 6” Extruder Model 60IN60TPIH – 500 HP, 30:1 L/D
- Manufacturer: Davis-Standard
- Model: 60IN60TPIH
51068004 Used Rebuilt Davis-Standard 6" Extruder Model 60IN60TPIH 500 HP, 30:1 L/D. 5/98, 43" center line height, 13.4:1 gearbox having new bearings (less thrust) with cooling unit, heat exchanger, motor driven...
Belvidere, IL
DAVIS STANDARD 150IN 1.5″ 24:1 17708
- Manufacturer: Davis-Standard
Davis Standard model 150IN DS-20 1.5″ extruder, S/N J6173, 1984 model year, 24:1 L/D vented barrel at a 42″ centerline. Davis Standard 6.53:1 gearbox rated for 50 HP with a service factor of 1.25 for a 152 RPM sc...
Elk Grove Village, IL
NRM/DAVIS STANDARD 3.5PMIV RH/WC VTD/PLGO 12733
- Manufacturer: Davis-Standard
NRM / Davis Standard model 3.5PMIV RH/WC VTD/PLGO, 3.5″ extruder, S/N 19222. 24:1 L/D water cooled 7 zone vented and plugged barrel. Approximately 100-150HP DC motor into a belt driven 15.12:1 gearbox with a 1.25...
Elk Grove Village, IL
DAVIS STANDARD 4.5″ 24:1 L/D 19040
- Manufacturer: Davis-Standard
Davis standard model 45IN45 4.5″ extruder. S/N V3255. 24:1 L/D air cooled and non-vented barrel at a center line of 42″. Driven by a Marathon Blue Max 250 HP 460-volt A/C motor thru 17.49:1 304 HP capacity gearbo...
Elk Grove Village, IL
Davis Standard 10" Extruder, Model 100TH100D. 38:1 L/D ratio; (8) zone electrically heated, water cooled
- Manufacturer: Davis-Standard
10755162 Used Davis Standard 10" Extruder, Model 100TH100D. 38:1 L/D ratio; (8) zone electrically heated, water cooled and non-vented barrel at nominal 44" center-line. 15.08:1 Gearbox reduction ratio; Rated at 1...
Belvidere, IL
DAVIS STANDARD 24″ X 48″ 17581
- Manufacturer: Davis-Standard
One (1) used 48″ Davis Standard cooling and polishing stand having three (3) nominal 24″ diameter chrome plated rolls mounted in a vertical arrangement for down stack operation. Rolls are pneumatically actuated. ...
Elk Grove Village, IL- Trusted Seller
DAVIS STANDARD 48"
- Manufacturer: Davis-Standard
Used Davis Standard sheet take-off unit consisting of (3) 48" face rolls mounted in a vertical arrangement for a downstack operation. All three rolls measure 16" in diameter. Top roll is tungsten and the middle a...
Hainesport, NJ 
3.4″ Davis Std. Extruder (Recently Rebuilt)
- Manufacturer: Davis-Standard
3.4″ Davis Std. Extruder (Recently Rebuilt) 50 HP AC Motor with AC Drive – rated up to 100 HP 24:1 L/D Ratio – Non-Vented Eurotherm Controllers Screw in Good Condition NOTE: Rebuilt and painted 2 years ago, never...
Rockville Centre, NY
Davis Standard 1.5" Extruder – Model 150IN DS-20, 24:1 L/D, Vented Barrel, 50 HP Gearbox
- Manufacturer: Davis-Standard
- Model: 150IN DS-20
10755179 Used Davis Standard 1.5" Extruder, Model 150IN DS-20. 24:1 L/D vented barrel at a 42" centerline. Davis Standard 6.53:1 gearbox rated for 50 HP with a service factor of 1.25 for a 152 RPM screw speed. Ge...
Belvidere, IL2.5" Davis Standard / Gala Pilot Plant Pelletizing Line – 75 kW Extruder, Underwater Pelletizer, Spin Dryer, 2020
- Manufacturer: Davis-Standard
- Model: 25
53759005 Used 2.5" Davis Standard/Gala Pilot Plant Pelletizing Line. 2.5" Davis Standard Extruder, Model 25, 24:1 L/D Ratio, 4 zones air cooled barrel, 75 KW HP Capacity, 1.25 SF, 17.26 to 1 gear reduction ratio,...
Belvidere, IL
DAVIS STANDARD 1.5″ PEDESTAL EXTRUDER 19059
- Manufacturer: Davis-Standard
One (1) used 1.5” 24:1 L/D Davis Standard model DS15 1.5” pedestal extruder having four (4) zone electrically heated and air-cooled barrel. S/N SO816. Shop Order Number 54242. Unit is mounted on a tripod with cas...
Elk Grove Village, IL
DAVIS STANDARD 1.5″ PEDESTAL EXTRUDER 19060
- Manufacturer: Davis-Standard
One (1) used 1.5” 24:1 L/D Davis Standard model DS15 1.5” pedestal extruder having a four (4) zone electrically heated and air-cooled barrel. S/N P2055. Shop Order Number 51763. Unit is mounted on a tripod with c...
Elk Grove Village, IL
DAVIS STANDARD 1.5″ PEDESTAL EXTRUDER 19063
- Manufacturer: Davis-Standard
One (1) used 1.5” 24:1 L/D Davis Standard model DS15 1.5” pedestal extruder having a four (4) zone electrically heated and air-cooled barrel. S/N 2058. Shop Order Number 51306. Unit is mounted on a tripod with ca...
Elk Grove Village, IL
Tip: Enter manufacturer, model or keyword
