Used Davis-Standard Processing

DAVIS STANDARD 3.5″ DOUBLE SPIRAL 12398
- Manufacturer: Davis-Standard
Davis Standard 3.5″ double spiral screw 32:1 L/D, 136″ overall length 12″ shank.Three are available.
Elk Grove Village, IL
DAVIS STANDARD SINGLE STAGE EXTRUDER 12020
- Manufacturer: Davis-Standard
4.5″ Davis Standard single stage extruder screw. Approximately 28:1 L/D with mixing pins at screw end.
Elk Grove Village, IL
DAVIS STANDARD 3.5″ SINGLE STAGE 12028
- Manufacturer: Davis-Standard
Davis Standard 3.5″ chrome plated single stage extruder screw. Approximately 24:1 L/D. Four rows of mixing pins.
Elk Grove Village, IL
DAVIS STANDARD 2.5″ EXTRUDER BARREL 7778
- Manufacturer: Davis-Standard
Davis Standard 2.5″ extruder barrel screw. 24:1 L/D.Three are available.
Elk Grove Village, IL
DAVIS STANDARD 3.5″ SINGLE STAGE 12024
- Manufacturer: Davis-Standard
Davis Standard 3.5″ single stage extruder screw. Approximately 24:1 L/D with five mixing pin sections.
Elk Grove Village, IL
DAVIS STANDARD 4.5″ SINGLE STAGE 12018
- Manufacturer: Davis-Standard
Davis Standard 4.5″ single stage extruder screw. Approximately 28:1 L/D with four rows of mixing pins.
Elk Grove Village, IL
DAVIS STANDARD 4.5″ SINGLE STAGE 12022
- Manufacturer: Davis-Standard
Davis Standard 4.5″ single stage extruder screw. Approximately 30:1 L/D with three rows of mixing pins near the screw end.
Elk Grove Village, IL
DAVIS STANDARD 15INDS20 1.5″ EXTRUDER 12754
- Manufacturer: Davis-Standard
Davis standard model 15INDS20 1.5″ extruder S/N K-9754. SO# 02359. 24:1 L/D. Powered by a fan cooled 15 HP 500-Volt 1750/2300 RPM DC motor through a 6.53:1 gearbox 152 RPM screw speed. Electrically heated and fan...
Elk Grove Village, IL
DAVIS STANDARD 8″ 900 HP 18828
- Manufacturer: Davis-Standard
Used Davis Standard Model 80IN80HT 8″ 32:1 L/D extruder having a seven (7) zone electrically, heated, water cooled (closed loop), and vented barrel at a 44″ center-line. S/N AA454. Shop Order 72635. Gearbox has a...
Elk Grove Village, IL
DAVIS STANDARD 165MM60TPIH 6.5″ EXTRUDER 10869
- Manufacturer: Davis-Standard
Davis Standard model 165MM60TPIH, S/N X7206 27:1 L/D 150HP DC motor 100RPM screw speed 526HP rated gearbox with a 1.5 service factor. No feed throat, no control panel. Water cooled barrel. Last used as a secondar...
Elk Grove Village, IL
DAVIS STANDARD 165mm (6.5″) EXTRUDER 19033
- Manufacturer: Davis-Standard
One used (1) Davis Standard model 165MM60T 165mm (6.49″) extruder having a 34:1 L/D ratio with a nine (9) zone electrically heated, water cooled (closed loop), vented and plugged barrel at presently an 89″ center...
Elk Grove Village, IL
DAVIS STANDARD 52″ WIDE 3 14917
- Manufacturer: Davis-Standard
Davis standard model Exemplar cooling and polishing stand with three 52″ face chrome plated rolls mounted in a vertical arrangement for down stack operation. The top roll measures a nominal 18″ in diameter, while...
Elk Grove Village, IL
DAVIS STANDARD 24″ X 48″ 17581
- Manufacturer: Davis-Standard
One (1) used 48″ Davis Standard cooling and polishing stand having three (3) nominal 24″ diameter chrome plated rolls mounted in a vertical arrangement for down stack operation. Rolls are pneumatically actuated. ...
Elk Grove Village, IL
DAVIS STANDARD 150IN 1.5″ 24:1 17708
- Manufacturer: Davis-Standard
Davis Standard model 150IN DS-20 1.5″ extruder, S/N J6173, 1984 model year, 24:1 L/D vented barrel at a 42″ centerline. Davis Standard 6.53:1 gearbox rated for 50 HP with a service factor of 1.25 for a 152 RPM sc...
Elk Grove Village, IL
DAVIS STANDARD 3.5″ EXTRUDER W/DUAL 17744
- Manufacturer: Davis-Standard
Davis Standard straw/tubing co-extrusion extrusion package manufactured 10/2012Last used on three color straws extruding two lanes of straws at one time. Extruders and controls are unitized on a single base. 460/...
Elk Grove Village, IL