- Trusted Seller
Extruder, 4-1/2" Dia, Davis Standard, 24:1, 200 HP #A740570
- Manufacturer: Davis-Standard
Davis Standard extruder, Model 450S D8770. 4-1/2" diameter, non-vented type, driven by 200 HP main motor. Includes control panel. Previously used in plastic production applications.
California, USA - Trusted Seller
Hainesport, NJ - Trusted Seller
DAVIS STANDARD 100 MM
- Manufacturer: Davis-Standard
Used temperature control panel previously used with 100mm Davis Standard extruder. No temperature instruments included. Previously used with PLC for temperature input.
Hainesport, NJ - Trusted Seller
DAVIS STANDARD 100 MM
- Manufacturer: Davis-Standard
Used temperature control panel previously used with 100mm Davis Standard extruder. No temperature instruments included. Previously used with PLC for temperature input.
Hainesport, NJ - Trusted Seller
DAVIS STANDARD 6"
- Manufacturer: Davis-Standard
Used Davis standard 1 1/2/2" cross head die with 6" adapter. Previously used with 6" Davis standard.
Hainesport, NJ - Trusted Seller
2000 Davis-Standard/Sterling Controls
- Manufacturer: Davis-Standard
2000 Davis-Standard/Sterling Controls Sequencing and heat controls Barber Colman Model Maco 6500 PLC with 1200 point parison programming Condition- Good
Harvey, LA - Trusted Seller
6" Davis Standard Single Screw Extruder, Model 60IN60, Water Cooled, New in 2004
- Manufacturer: Davis-Standard
17.21 Gearbox Ratio, 424 hp Capacity with 1.5 Service Factor, NEW 400hp Teco AC Motor, EPS4004, 1800RPM, 449TX Frame, And New TECO AC Drive Model EQ7-4450-C, 3 Year Manufactures Warrantee on Motor/Drive. 5 Barrel...
United States - Trusted Seller
150mm-Davis-Standard-single-screw
- Manufacturer: Davis-Standard
150mm Davis Standard single screw extruder model 60IN60TPIH. Double vented, water cooled. 42D, 375kw dc motor,90/90 22kw gear pump. 102 RPM screw 1996 Electrically heated water cooled barrel with cast aluminium h...
Swindon, United Kingdom - Trusted Seller
1850mm wide Davis Standard Sheet Downstream with 450mm diameter rolls inclined, independent drives. Pump group hydraulic nip, haul off guillotine. 1997
- Manufacturer: Davis-Standard
1850mm wide Davis Standard Sheet Downstream with 450mm diameter rolls inclined, independent drives. Pump group hydraulic nip, haul off guillotine. 1997 3 x AC interor variable speed motors 4.5kw per motor. Hydrau...
Swindon, United Kingdom - Trusted Seller
1500mm Davis Standard coextrusion sheet line with 90mm,60mm,60mm extruders. 1400mm die 0.5-8mm. 5 layers. 1500mm x 460mm, haul off, shear 2001
- Manufacturer: Davis-Standard
1500mm Davis Standard coextrusion sheet line with 90mm,60mm,60mm extruders. 1400mm die 0.5-8mm. 5 layers. 1500mm x 460mm, haul off, shear 2001 Single-screw extruder brand: Davis-standard, 90 Ø diam, 32 L/D, moto...
Swindon, United Kingdom 
2005 Davis Standard EB 89 M_2005
- Manufacturer: Davis-Standard
Single-screw extruder for PVC 1 x Davis Standard EB 89 M Motor-power 35 kw Machinery stored
Renningen, GermanyDAVIS STANDARD 350 S
- Manufacturer: Davis-Standard
Rubber extruder, type 350 S, screw ø 90 mm (3 ½â)
Monschau, Germany
Mono 90 extruder
- Manufacturer: Davis-Standard
Monorosca extruder 90 mm Diameter: 3.5" (90mm) | L/d: 25 | Thread: with Madok mixer | Dc motor, with converter: 75 CV | Resistances: in aluminum block | Temperature controllers: electronics
- Trusted Seller
2021 Davis Standard DSR 3.5"
- Manufacturer: Davis-Standard
40HP AC Drive Cord Screw Tube Diameter Range .25″-3″ Includes the Following; -Guill Crosshead GTN525BF -Davis-Standard Silicone Curing IR Tower For tubing up to 3.00” Outer Diameter (x1)System Engineering/ Dry Te...
- Trusted Seller
2014 Davis-Standard Super Blue 75MM
- Manufacturer: Davis-Standard
Used 3″ Davis-Standard Super Blue 75MM Extruder with BPM Bay Plastics Machinery WBX1210-15 Water Bath, EVAK-06 Vacuum Air Knives, and SB 100 Pelletizer, 2014: DS Super Blue Single Screw Extruder: – 3″ (75MM) – L/...
Tip: Enter manufacturer, model or keyword
