Used Dairy Processing in Poland

German dairy pump

German dairy pump Dimensions: - Length - 520 mm; - Width - 250 mm; - Height - 470 mm. Technical data: - Engine power - 3 kW - 2,900 U/min; - Capacity - approx. 30,000 l/h.

Plate heat exchanger F.A.M "Spomasz" Bełżyce

• Manufacturer: ,,Spomasz" Bełżyce

Plate heat exchanger F.A.M "Spomasz" Bełżyce Intended for the needs of the dairy industry. Technical data: · Manufacturer - "Spomasz" Bełżyce Dairy Apparatus Factory . Type - P108 · Max. pressure working - 6 ba...

Filling machine "LAB 4"

• Manufacturer: ,,LAB 4"

Filling machine "LAB 4" The machine is used for pouring food products, e.g. milk, concentrated juices, purees, etc. in bottles or containers capacity 250, 500, 1000 cm³. Dimensions: - Length - 1.400 mm; - widt...

Tube holder - stainless steel

Tube holder - stainless steel Dimensions: - Length - 1,530 mm; - Width - 380 mm; - Total height - 1,400 mm; - Working height - 1,030 mm. Technical data: - Capacity - 10,000 l/h; - Capacity - 77 or 87 l; - ...

Swivel degasser

Swivel degasser Dimensions: - Total cross-section of the deaerator - Ø 800 mm; - Height - 1,750 mm. Technical characteristics: - Vacuum - max. 960 hPa; - Working vacuum - 200 - 300 hPa; - Capacity - 5.000 l/h...

Milk centrifuge "ALFA - LAVAL" Type 3191 M

• Manufacturer: Alfa-Laval

Milk centrifuge "ALFA - LAVAL" Type 3191 M Technical data: - Worm wheel shaft - 1,420-1.500, 1,700-1,800 U/min; - Tachometer - 1,420-1,500, 1,700-1,800 U/min; - Number of gears - 71-75, 85-90; - Engine power - ...

Milk centrifuge "LWG"-47

• Manufacturer: "ALFA LAVAL" Szwecja

Milk centrifuge "LWG"-47 Centrifuge manufactured under license from Alfa-Laval - Sweden, type 3191M, is adapted to defattage milk. It is equipped with a valve three-way for re-mixing milk. It is used in large da...

Cheese pressing unit

Cheese pressing unit I) Pre-compression bath Bath dimensions: - Length: 5,000 mm; - Width: 1,940 mm; - Height: 2,400 mm. Technical data of the bathtub: - Two beams with pneumatic cylinders; - Perforated floo...

Curd presses

Curd presses Equipped with a frame with three cylinders. Made entirely of stainless steel. Curd press I Dimensions: - Length - 3,250 mm; - Width - 1,040 mm; - Height - 900 mm. Internal dimensions: - Length ...

Tubular retainer in insulating dome

Tubular retainer in insulating dome Dimensions: - Width - 2,100 mm; - Height - 2,300 mm. Technical data: - Producer - APV Psilac - Silkeborg Divisions, DK-8600, Denmark; - Type - HHT; - Capacity - 6,000 l/h; ...

Wotator - a device for curing fats by "MANZINI"

• Manufacturer: Manzini

Wotator - a device for hardening fats by "MANZINI" Dimensions: - Length - 2,330 mm; - Width - 1,160 mm; - Height - 1,700 mm. Technical data of the device: - Producer - Tito Manzini & Figli, Italy; - Type - SO...

Device for hardening fats - a votator

• Manufacturer: Votator

Device for hardening fats - a votator Dimensions: - Total length - 1,580 mm; - Base width - 800 mm; - Total height - 1,750 mm. Technical data: - Pump type - KMR 112M2MO; - Pump power - 7.5 kW - 2.860 U/min; -...

Apparatus for measuring the fat content

Apparatus for measuring the fat content The device is designed to measure the fat content in milk, sour cream and cottage cheese by the Gerber method. NOTE: glass grease gauges are not included in the equipment...

Wotator - device for hardening fats

Wotator - device for hardening fats Dimensions: - Total length - 1,550 mm; - Total width - 500 mm; - Total height - 700 mm. Technical data: - Producer - IMPULSA, Germany; - Type - SE/1; - Engine - 2.8 kW / 20...

Tumbler cycle churning KD-40 i KD-63 - conical

Cyclic chilling drum churns KD-40 and KD-63 - conical A. Conical chuck 4,000 l: Overall dimensions: - Total length - 3,850 mm; - Total width - 2,500 mm; - Total height - 3,500 mm. Overall dimensions of the ta...