Machine Tools » Milling Machines » Universal Milling Machines » Saxony

Search By Manufacturer

Building Filters

48

Used Universal Milling Machines in Saxony, Germany

  • 1998 REFORM FU 321M

    1998 REFORM FU 321M

    • Manufacturer: Reform

    The machine is currently in the technical department. Equipment: 2x counter bearing Ø 56 mm 3-way measuring system ACU-RIDE Cooling water system with pump Chip/oil drip tray Hand crank

    Leipzig, Germany
  • 1975 MAHO MH 500

    1975 MAHO MH 500

    • Manufacturer: Maho
    • Model: MH 500

    Spindle vertical tool holder SK 40 Quill stroke 60 mm Speed 40 - 2000 rpm with 18 transmission steps Spindle horizontal Tool holder SK 40 Speed 40 - 2000 rpm with 18 transmission steps Equipment: 3-way display He...

    Leipzig, Germany
  • 1998 VREMAC FU 251

    1998 VREMAC FU 251

    • Manufacturer: VREMAC

    Ausstattung: 2x Gegenlager Ø 55mm Kühleinrichtung: Pumpe und Zuführung Bedienung über 3-Wege Messsystem ACU-Ride und Bedientafel Maschinenfüße

    Leipzig, Germany
  • 1977 KUNZMANN UF 6 N

    1977 KUNZMANN UF 6 N

    • Manufacturer: Kunzmann

    Coolant device 3-way DRO Heidenhain control panel Accessories see photo

    Leipzig, Germany
  • 1976 Induma 3/S-A

    1976 Induma 3/S-A

    • Manufacturer: Induma

    Milling machine with universal milling head Spindle run right/left Table specifications: X/Y/Z travel: 860/380/460mm. feed X/Y/Z: 40 - 400mm/min. continuous rapid traverse 400mm/min. max. workpiece weight 30kg Eq...

    Leipzig, Germany
  • 1984 WMW FUW 315/5

    1984 WMW FUW 315/5

    • Manufacturer: WMW
    • Model: FUW 315/5

    Machine was rebuilt in 2002, modernized with a modern control Siemens 840D/810D shopmill. - adjustment travel via counter holder slide: 440mm Equipment: - cooling system - control panel with jib arm Accessories: ...

    Leipzig, Germany
  • 1995 Emco FB-5

    1995 Emco FB-5

    • Manufacturer: Emco

    Control screen replaced with new LCD. The milling machine is equipped with measuring system with digital display PROTOTRAK MX2. The X and Y axes can run cycles. (interpolation), the Z-axis is moved manually. Spin...

    Leipzig, Germany
  • 1996 Hermle UWF 851 H

    1996 Hermle UWF 851 H

    • Manufacturer: Hermle
    • Model: UWF 851

    Universal Milling and Drilling Machine Equipment: - cooling tank capacity 100 litres, flow rate 16 l/min - control panel with jib length arm - hand wheel control unit - 8 pieces machine base The machine can be de...

    Leipzig, Germany
  • 1984 Wilhelm Grupp UF 20

    1984 Wilhelm Grupp UF 20

    • Manufacturer: Wilhelm Grupp

    The spindle head can be swung out. Equipment: with coolant system with cooling water collecting tray Accessories div. milling cutters and milling shafts (comparable in the photo)

    Leipzig, Germany
  • Optimum M3HS

    Optimum M3HS

    • Manufacturer: Optimum

    Table movement: X-axis: 200mm and Y-axis: 450mm spindle vertical Z-axis: 460mm max. tool holder milling cutter: Ø 20mm drilling capacity ST: Ø 13mm max. distance spindle-table: 470mm Equipment: Manual control uni...

    Leipzig, Germany
  • Maho MH 800

    Maho MH 800

    • Manufacturer: Maho
    • Model: MH 800

    Further features: Headstock projection min./max.: 2094 / 2544 mm Equipment: -cooling water pump with feed -Linear path measuring system - Heidenhain ND750 Accessories: -Machine vice

    Leipzig, Germany
  • 1992 Hermle UWF 900 W

    1992 Hermle UWF 900 W

    • Manufacturer: Hermle
    • Model: UWF 900

    Equipment: - separated production cell - coolant system - control panel with swivel-mounted boom - measuring probe SK 40 Heidenhain TS 120 - oil collecting basin

    Leipzig, Germany
  • 1977 SHW UF 21

    1977 SHW UF 21

    • Manufacturer: SHW
    • Model: UF 21

    Console design with tilting, tilting and swiveling table, as well as adjustable vertical milling head. Machine with 3-axis digital readout (with resolution 0.01mm) with feed and individual drive of all three axes...

    Leipzig, Germany
  • 1989 Deckel FP 2A

    1989 Deckel FP 2A

    • Manufacturer: Deckel / Maho
    • Model: FP 2
    • Spindle taper: SK 40

    Operation via control panel Grundig electronic with extension arm equipment: - cooling with pump - manual-control unit with steering wheel - machine illumination Machine can be demonstrated under power.

    Leipzig, Germany
  • 1996 Hermle UWF 851 H

    1996 Hermle UWF 851 H

    • Manufacturer: Hermle
    • Model: UWF 851

    Universal Milling and Drilling Machine - with IBAG high frequency spindle type HF 100A-30/24 - milling spindle taper Tool taper IBAG SKI with IBAG tightening bolt - cooling tank, capacity 16 l/min and 100 litre c...

    Leipzig, Germany
1234

Overview

Universal milling machines are versatile and durable machines used in various milling applications. They are capable of performing both horizontal and vertical milling operations and can handle complex, multi-axis tasks. These machines are ideal for producing precise parts in manufacturing and industrial settings, offering flexibility and efficiency in machining operations.

FAQ

What should I look for when purchasing a used universal milling machine?

Check the machine's overall condition, including wear on the spindle and table. Verify the accuracy of its movement and inspect any included tooling. Maintenance records are also important to review.

How can I safely ship a universal milling machine?

Use a specialized heavy machinery transport service. Ensure the machine is properly secured and protected with appropriate packaging materials to prevent damage during transit.

What maintenance is required for a universal milling machine?

Regular maintenance includes lubricating moving parts, checking and adjusting the alignment, and cleaning the machine to prevent debris buildup. Refer to the manufacturer’s manual for specific maintenance intervals and procedures.