Used Machine Tools in Bern, Switzerland

TECHNICA ZSM 150

• Manufacturer: TECHNICA

Min. work-piece diameter: 2 mm | Max. work piece diameter: 60 mm | Workpiece length min.: 50 mm | Workpiece length max.: 1100 mm | Angle of the centre hole: 60 ° | Taper in centre hole min.: mm | Max: 50 mm | Qu...

MOORE G 18

• Manufacturer: Moore

Table length: 610 mm | Table width: 280 mm | Longitudinal travel (x-axis): 450 mm | Transversal travel (y-axis): 280 mm | Vertical travel (z axis): 320 mm | Spindle stroke: 92 mm | Regolazione angolare del canno...

TECHNICA ZSM 810

• Manufacturer: TECHNICA

Min. work-piece diameter: 8 mm | Max. work piece diameter: 125 mm | Workpiece length min.: 50 mm | Workpiece length max.: 1100 mm | Table load max.: 120 kg | Angle of the centre hole: 60 ° | Taper in centre hole...

2001 VOUMARD 110 CNC B TN4

• Manufacturer: Voumard

Machine available from January 2026, directly after overhaul

2003 HAUSER S 35-400

• Manufacturer: Hauser

Control: GE FANUC Series 16i-M | Table length: 600 mm | Table width: 380 mm | Longitudinal travel (x-axis): 500 mm | Transversal travel (y-axis): 300 mm | Regolazione angolare del cannotto: ° | Travel of the ver...

2004 HAUSER S 45-400

• Manufacturer: Hauser

Control: FANUC | Table length: 770 mm | Table width: 630 mm | T-channel width: 14 mm | Table load max.: 500 kg | Longitudinal travel (x-axis): 700 mm | Transversal travel (y-axis): 500 mm | Verticla travel (w-ax...

ARBOR FOR DRILL CHUCK UNHARDENED “FN”

FISCHER ZSM 1000

• Manufacturer: Fischer
• Model: ZSM 1000

Angle of the centre hole: 0 - 60 ° | Taper in centre hole min.: mm | Max: 300 mm | Work-piece mechanism: 1 kW | Max. grinding head traverse: 200 mm | Voltage: 380 Volt | Length: 800 mm | Width: 800 mm | Height: ...

FISCHER ZSM 1500

• Manufacturer: Fischer

Max. work piece diameter: 120 mm | Workpiece length max.: 1600 mm | Angle of the centre hole: 0 - 60 ° | Taper in centre hole min.: mm | Max: 300 mm | Work-piece mechanism: 1 kW | Max. grinding head traverse: 20...

SOLID RBS4 / 13

• Manufacturer: Solid

Number of drill-heads: 4 | Table length: 1250 mm | Table width: 400 mm | Number of t-channels: 1 | T-channel width: 14 mm | Number (steps): 12 | Stepless: 200 | From: 3200 t/min | Voltage 50 hz 3x: 380 Volt | Ma...

HAUSER S 35-400

• Manufacturer: Hauser

Control: GE FANUC Series 16i-M | Table length: 600 mm | Table width: 380 mm | T-channel width: 10 mm | Number of spline: 6 | Distance of the t-slots: 50 mm | Table load max.: 200 kg | Longitudinal travel (x-axis...

KUGEL MULLER MPS 2

• Manufacturer: Kugel Muller
• Model: MPS 2

Throwing wheel diameter: 175 mm | Circulary table diameter: 300 mm | Grinding height over table: 245 mm | Grinding spindle speeds: 2560 t/min | Voltage 50 hz 3x: 380 Volt | Machine's weight about: 200 kg | Lengt...

GMN GEORG MÜLLER MPS 2-R 300

• Manufacturer: Muller

Diameter: 175 mm | Width: 900 mm | Bore: 76 mm | Circulary table diameter: 300 mm | Travel of the fine feed: 12 mm | Grinding height over table: 240 mm | Magnetic chuck: 95 mm | From: t/min | Up to: 30 t/min | G...

HAUSER S 50 L CNC 400

• Manufacturer: Hauser

Control: GE FANUC Series 16-M | Table length: 1320 mm | Longitudinal travel (x-axis): 1200 mm | Transversal travel (y-axis): 600 mm | Travel of the vertical slide: 635 mm | Passage from grinding motor to table: ...

HAUSER S 40 CNC

• Manufacturer: Hauser

Control: CNC 311 | Table length: 770 mm | Table width: 630 mm | Table load max.: 500 kg | Longitudinal travel (x-axis): 650 mm | Transversal travel (y-axis): 450 mm | Verticla travel (w-axis): 500 mm | Max. grin...