Building Filters
- Trusted Seller
EMG 25T
- Manufacturer: EMG
Standard equipment 20° tiltable frame 6-digit counter with reset switch 8-digit counter without reset switch Centralised lubrication by hand pump Bi-manual push-button safety control Stroke-by-stroke or continuou...
La Chaux-de-Fonds, Switzerland - Trusted Seller
EMG 6T
- Manufacturer: EMG
Standard equipment 20° tiltable frame 6-digit counter with reset switch 8-digit counter without reset switch Centralised lubrication by hand pump Bi-manual push-button safety control Stroke-by-stroke or continuou...
La Chaux-de-Fonds, Switzerland - Trusted Seller
SERVO 7150
- Manufacturer: SERVO
SERVO 7150 is a micro-drill for bench with high speed spindle Handy, accurate, spindle nose for B-8 collets. Spindle speed from 200 to 20'000 rpm in 2 stage. Adjustable with the built-in potentiometer. With thyri...
La Chaux-de-Fonds, Switzerland - Trusted Seller
UNIVERSAL GRINDING MACHINE EWAG TYPE WS-11
- Manufacturer: Ewag
- Model: WS11
Completely overhauled with W20 spindle Digital Heidenhain and new ULT ASD 200 type extraction system Metric base 3x380V/50Hz, revised vacuum, Q36-12 grinding spindle machine equipped with : – revised 4E vernierle...
Biel/Bienne, Switzerland - Trusted Seller
EMG 15T
- Manufacturer: EMG
With electro-pneumatic mono-disc clutch Technical data Standard equipment 20° tiltable frame 6-digit counter with reset switch 8-digit counter without reset switch Centralised lubrication by hand pump Bi-manual p...
La Chaux-de-Fonds, Switzerland - Trusted Seller
1987 PLATARG 912 Ref No: 46450
- Manufacturer: PLATARG
The press is now in storage - was in a full running state when taken out of service. High lift stroke cams 159 mm - max. shell height 76 mm 13 Stations, 12 Rams + 1 Slave Wedge Adjustable Rams with Standard Male ...
Niederhelfenschwil, Switzerland - Trusted Seller
PLATARG 611 Ref No: 40001
- Manufacturer: PLATARG
Specifications: Number of stations: 12 (11+1) Capacity per ram: 6 tons Maximum stroke: 114 mm Max. shell height: 50 mm Standard ram pitch: 82 mm Blank diameter: 80 mm Maximum speed: 80 spm Example of an overhaule...
Niederhelfenschwil, Switzerland - Trusted Seller
SCHULER S2-160-1.25-30-160 Ref No: 49505
- Manufacturer: Schuler
Object: 49505 | Drive system: eccentric / crank | Openings in uprights: yes | Number of slide actions: 1 | Total force (nominal): 160 to | Table surface (left-right): 1130 mm | Table surface (front-back): 1000...
Niederhelfenschwil, Switzerland - Trusted Seller
2025 PLATARG 312 HS Ref No: 48610
- Manufacturer: PLATARG
Object: 48610 | Controls: BECKHOFF | Number of slide actions: 13 | Slide force: 3 to | Stroke: 60 mm | Stroke rate (max.): 210 /min | Slide adjustment: 6 mm | Variable speed: yes | Stroke rate (min.): 70 /m...
Niederhelfenschwil, Switzerland - Trusted Seller
1978 PLATARG 312 Ref No: 50301
- Manufacturer: PLATARG
Standard flat plate lifters Pneumatic feeder Machine still in production - video available
Niederhelfenschwil, Switzerland - Trusted Seller
1995 KAISER V63/620 Ref No: 54501
- Manufacturer: Kaiser
Operating hours: 74601 (measured on 14-05-25, machine is still in use) Maintenance records available upon request
Niederhelfenschwil, Switzerland - Trusted Seller
HISPANO DKOV 5
- Manufacturer: HISPANO
Center height: 140 mm | Max. grinding diameter: 279 mm | Distance between centres: 750 mm | Table size width x depth: 1050x150 mm | Longitudinal travel: 600 mm | Cross travel: 230 mm | Swivelling: 90 Grad | Grin...
Beringen, Switzerland - Trusted Seller
2000 BENELLI 650T/3MR/2/12/3750X1100/LD/ET3 Ref No: 48090
- Manufacturer: Benelli
Press equipped with 2 feeing lines - one from the side for blank cutting in transfer mode and one in line for for progressive die operation.
Niederhelfenschwil, Switzerland - Trusted Seller
SCHAUBLIN 125 C
- Manufacturer: Schaublin
- Model: 125C
Center height: 125 mm | Distance between centres: 500 mm | Turning diameter over cross slide: 130 mm | Turning diameter over bed: 270 mm | With digital read-out. spindle bore: 34 mm | Taper in spindle camlock: D...
Beringen, Switzerland 
Lindner Unitrac 122 L-Drive
- Manufacturer: Lindner
Continuously variable travel drive with active standstill control Power split, speed reduced Perkins synchro motor with 122 hp Tilting cabin very good overview very good entry into the cabin Total weight 9.5t tor...
Rickenbach, Switzerland
