Machine Tools » Saws » Panel Saws » Canada

Building Filters

15

Used variable speed in Canada

Trusted Seller
Masteel BAXTER 360HFA
- new
- Manufacturer: Masteel
- Weight: 2,600 lb. (1180 kg)
The model 360HFA is a fully automatic bandsaw. Material is fed via a hydraulically driven shuttle mounted on linear bearings. The machine is equipped with a 1¼” (34mm) blade and driven by a 5 hp (3.75 kW) motor. ...
Delta, Canada
Trusted Seller
2016 HOLZ-HER CUT 6120 FRONT LOAD, AUTOMATIC PANEL SAW [PH-012489]
- used
- Manufacturer: Holz-Her
- Model: CUT 6120
HOLZ-HER CUT 6120 FRONT LOAD, AUTOMATIC PANEL SAW: -- Specifications: 3,900 mm (153.5") Max. rip cut cap., 3,900 mm (153.5") pull back pusher stroke; 82 mm (3.2") saw blade projection. 15 HP (11 kW) Main saw moto...
$38,000 USD
Get financing
Est. $715/mo
Canada
Trusted Seller
2004 Giben Onix 105 SPT
- used
- Manufacturer: Giben
- Model: ONIX 105 SPT
-LIFT TABLE SPECIFICATIONS -Lift table dimensions 3800 X 1600mm (149.5" X 63") -Lift table stroke 800mm (31.5") -Prepared for loading from the side (rip cut end) -Idle table rollers -Maximum stack height without ...
Canada
Trusted Seller
2001 SELCO EB 90 3200 FRONT LOAD, AUTO. PANEL SAW [PK-011306]
- used
- Manufacturer: Selco
SELCO - EB 90: CNC Front Load Panel Saw Specifications -- 173" Overall cutting length; 173" pull back; 3.3" (85 mm) max. saw blade projection; 12 HP (9 kW) main saw motor; 2.4 HP (1.8 kW) scoring motor. -- Modul...
$17,900 USD
Get financing
Est. $352/mo
Canada
Trusted Seller
2006 HOLZ-HER CUT 85 FRONT LOAD, AUTOMATIC PANEL SAW [PH-012468]
- used
- Manufacturer: Holz-Her
- Model: CUT 85
HOLZ-HER CUT 85 FRONT LOAD, AUTOMATIC PANEL SAW: -- Specifications: 4,250 mm (167") Max. rip cut cap., 3,800 mm (149") pull back pusher stroke; 97 mm (3.8") saw blade projection. 15 HP (11 kW) Main saw motor, 3 H...
$24,000 USD
Get financing
Est. $452/mo
Canada
Trusted Seller
2000 SCHELLING FM 430/410 FRONT LOAD, AUTO. PANEL SAW [PK-011267]
- used
- Manufacturer: Schelling
SCHELLING FM-430/410 CNC Front Load Panel Saw Specifications & Features: 169" (4292 mm) Cutting length & 165.3" (4,200 mm) pull back, 3.75" (95 mm) max. saw blade projection; 25 HP (19 kW) 4,100 RPM main & 3.4 HP...
$14,092 USD
Get financing
Est. $277/mo
Canada
Trusted Seller
2007 SELCO EB 120L FRONT LOAD, AUTO. PANEL SAW [PK-280322]
- used
- Manufacturer: Selco
SELCO - EB 120: CNC Frontload Panel Saw Specifications -- 14.4' (4,400 mm) Overall cutting length & 4.7" (120 mm) max. saw blade projection; 18 HP main & 2.4 HP scoring motor; modular roller rear machine table; s...
$13,950 USD
Get financing
Est. $274/mo
Canada
Trusted Seller
2007 schelling FH4 330-310
- used
- Manufacturer: Schelling
Year of construction 2007 Installed date Sep-08 Machine hours 9290 Price List Features Here Over all Depth with table 6810mm Over all Width 6352mm Support tables 600x2200 air flotation tables 1 stationary 2 movab...
Canada
Trusted Seller
2006 SELCO EB 70L FRONT LOAD, AUTO. PANEL SAW [PK-011295]
- used
- Manufacturer: Selco
- Model: EB 70L
SELCO EB 70 L CNC Front-Load Horizontal Beam CNC Panel Saw Specifications & features: -- 126" (3,200 mm) Overall cutting length, 2.75" cutting height (80 mm saw blade projection), 10 HP main & 3 HP scoring motor....
$13,659 USD
Get financing
Est. $268/mo
Canada
Trusted Seller
Masteel BAXTER 475X1000SA
- new
- Manufacturer: Masteel
- Weight: 6,300 lb. (2860 kg)
SEMI-AUTOMATIC HORIZONTAL BANDSAW Double column machine provides maximum capacity and rigidity Design utilizes linear bearings for high stiffness and smooth motion Hydraulic lift of the saw head Saw up travel can...
Delta, Canada
Trusted Seller
Masteel RF-250N
- new
- Manufacturer: Masteel
- Motor: ; 2HP 3PH
- Weight: NW/GW; 530 / 570 kgs
The chip tray stand is jointed with saw base. It can swivel with saw bow and no need to move the workpiece. Fully adjustable hydraulic downfeed controls the rate of descent Control panel installed on top of saw ...
Delta, Canada
Trusted Seller
Masteel BAXTER 475HFA
- new
- Manufacturer: Masteel
- Weight: 5,200 lb. (1900 kg)
FULLY AUTOMATIC HORIZONTAL BANDSAW The model 475HFA is a fully automatic bandsaw. This machine can cut solids and grating. It has an extra large capacity of 18” (460mm) x 36” (915mm). Machine can cut solids using...
Delta, Canada
Trusted Seller
Masteel BAXTER 500MV-C
- new
- Manufacturer: Masteel
- Weight: 5000 lb. (2188 kg)
MITERING/VERTICAL BANDSAW The model 500MV miters 45 degrees left and right. Additionally the two sets of vises pivot making it possible to cut compound angles. The machine has a high efficiency planetary gearbox....
Delta, Canada
C370-2CNC
- new
- Manufacturer: Hydmech
- Model: C370-2CNC
- Weight: 2350 lbs.
Automatic Vertical Column Cold Saw The C370CNC is an automatic vertical column cold saw that miters from 60° left to 45° right. The C370CNC has a standard 40″ single stroke, multi-indexing material feed system. ...
Surrey, Canada
C370-2SI
- new
- Manufacturer: Hydmech
- Model: C370-2SI
- Weight: 1408 lbs.
Semi-Automatic Vertical Column Cold Saw The C370-2SI is a semi-automatic vertical column cold saw with the largest capacity in our cold saw line up. The C370-2SI miters from 60° left to 45° right. Featuring a 4 ...
Surrey, Canada

Overview

Panel saws are powerful cutting machines designed for making precise, straight cuts in large panels of wood, plastic, or other materials. Ideal for woodworking shops, cabinet makers, and carpentry businesses, these saws can handle large sheets of material efficiently, reducing manual labor and increasing accuracy.

FAQ

What should I consider when buying a used panel saw?

Check the saw's overall condition, the precision of its cuts, and any wear on the blade or motor. Verify the accuracy of the alignment and look for any signs of previous heavy use or repair.

How do I ensure the panel saw is shipped safely to my location?

Use a reliable shipping service that specializes in heavy machinery. Ensure the saw is properly disassembled, packed, and secured to prevent damage during transit.

What is the maintenance schedule for a panel saw?

Regular maintenance includes cleaning the sawdust and debris from the machine, checking and replacing the blade as necessary, and inspecting the motor and alignment for any issues. Refer to the manufacturer's manual for specific maintenance guidelines.