Used variable speed in British Columbia, Canada

2015 Linmac UE-250s-CSA 10″ Horizontal Bandsaw

Specifications 2 HP 208V 6 A 3 Phase Swivel Bed Cutting capacity: 10″ x 14″ | Blade size: 1″ x 0.035″ x 130″ | Variable speed adjustment: 25 MPM to 75 MPM

DOALL C-9V

• Manufacturer: DoAll
• Model: C-9V
• Phase type: Three-phase

Hydraulic Lift on Arm 13" High x 15" Wide Capacity 12" Round Capacity

2013 MACC New 350 Cold Cut Saw

• Manufacturer: Macc
• Model: NEW 350

Specifications 440V 4.7 A 3 Phase MAXIMUM CUTTING CAPACITIES: Round Tube Square Tube Solid Round Rectangular Tube TECHNICAL DATA & FEATURES: Double-Hinged Pin with Eccentric Bush. Reduction Unit in Oil Bath. Doub...

Masteel BAXTER 475SA Saws

• Manufacturer: Masteel

Masteel BAXTER 475SA Saws SEMI-AUTOMATIC HORIZONTAL BANDSAW The model 475SA has a large capacity for cutting structural profiles and pipes. Uses a 1¼” (34mm) blade drive by a 5 hp (3.75 kW) motor. Drive system is...

Masteel BAXTER 480SA Saws

• Manufacturer: Masteel

Masteel BAXTER 480SA Saws HEAVY DUTY SEMI-AUTOMATIC HORIZONTAL BANDSAW The model 480SA is ideal for bundle cutting. The machine has a split vise which clamps on both sides of the blade. There are front and rear v...

Masteel BAXTER 360HFA Saws

• Manufacturer: Masteel

Masteel BAXTER 360HFA Saws The model 360HFA is a fully automatic bandsaw. Material is fed via a hydraulically driven shuttle mounted on linear bearings. The machine is equipped with a 1¼” (34mm) blade and driven ...

1960 DOALL 3613-2

• Manufacturer: DoAll
• Model: 3613-2
• Phase type: Three-phase

Horsepower: 3 hp | Max. workpiece height: 13 " | Max. workpiece width: 36 " | Saw type: Bandsaws | Voltage: 440 volts | Phase: 3-phase | Depth of throat: 36" | Under guide: 13" | Blade speeds (variable): 0 to 52...

Masteel BAXTER 475HDP Saws

• Manufacturer: Masteel

Masteel BAXTER 475HDP Saws HEAVY DUTY SEMI-AUTOMATIC HORIZONTAL BANDSAW The model 475HDP is ideal for cutting solids. The machine has a large 1½” (41mm) blade driven by a 7½ hp (5 kW) motor. Full stroke hydraulic...

Masteel BAXTER 475M Saws

• Manufacturer: Masteel

Masteel BAXTER 475M Saws SEMI-AUTOMATIC DOUBLE COLUMN HORIZONTAL BANDSAW The model 475M has a large capacity for cutting structural profiles and pipes. Head miters out to 60 degrees by hydraulics with a digital a...

Masteel WS-1824FA Saws

• Manufacturer: Masteel

Masteel WS-1824FA Saws FEATURES Miter cutting 0°-45° Touch screen and length encoder Variable blade speed by motor inverter Hydraulic blade tension device Equipped with two vertical presses Manual bow height sett...

Masteel BAXTER 360MV-C Saws

• Manufacturer: Masteel

Masteel BAXTER 360MV-C Saws MITERING VERTICAL BANDSAW Machine can miter cut 45 degrees to the right and left, as well as cut vertically Feed is driven by ball screw Blade speed controlled with a variable frequenc...

Masteel RF-500DSAH Saws

• Manufacturer: Masteel

Masteel RF-500DSAH Saws Dual Swivel cutting angle from 0~+-60 degrees. Can fix the position every 5 degrees. High efficiency gear drive system cooperated to variable step pulley provides fast changing speed. Also...

Masteel BAXTER 600M2 Saws

• Manufacturer: Masteel

Masteel BAXTER 600M2 Saws HORIZONTAL DOUBLE COLUMN MITERING BANDSAW Double column machine provides maximum capacity and rigidity Miter cutting to the front 45 degrees and rear 60 degrees Hydraulic tilt of saw hea...

Masteel H-300HA Saws

• Manufacturer: Masteel

Masteel H-300HA Saws Standard Features: Shuttle Type Automatic Feed 3pcs Carbide blade guide system Present cut-counter with shut-off Power Driven Blade Brush Nesting fixture for bundle cutting Infinitely variabl...

Masteel H-550HA Saws

• Manufacturer: Masteel

Masteel H-550HA Saws Standard Features: Shuttle Type Automatic Feed 3pcs Carbide blade guide system Present cut-counter with shut-off Power Driven Blade Brush Nesting fixture for bundle cutting Infinitely variabl...