Northtech NT ES43 4 Sided Straight and Curved Part Edge Sander
- Manufacturer: Northtech
- Phase type: Three-phase
NT ES43 4 Sided Straight and Curved Part Edge Sander 2 Belt with 360° rotation (1) 1HP sanding motor (1) 1/4HP 0 – 35 FPM variable speed feed Min. working length: 350mm (13-3/4") for straight workpiece 200m...
Dundee, NY
Northtech NT-8-600RC 24'' Double Head Wide Belt Sander
- Manufacturer: Northtech
- Phase type: Three-phase
NT-600RC WIDE BELT SANDER 24″ 25X75″ SANDING BELT Machine hp: 16-1/4 HP | Phase: 3 Phase | Amp requirement: 40 / 20 Amp | Configuration: Roller Combination | 1st head: 8'' Fluted Rubber Roller | 2nd head: Fixed 3...
Dundee, NY
Laguna, Pro 43″ Widebelt Sander
- Manufacturer: Laguna
This machine is equipped with 1 ( 8”) roller and a second (4”) roller followed by a wide platen for a fine finish. This allows you to use a rougher grit on the first roller (8”) that will absorb most of the impac...
Dundee, NY
Laguna, Pro 37″ Widebelt Sander
- Manufacturer: Laguna
This machine is equipped with 1 combination head. This means you can sand either using the drum or the sanding platen or both at the same time. Due to the large HP motor (20 HP) the machine is capable of dimensio...
Dundee, NY
Northtech NT-RRS80B2 Round Rod Sander Double Belt
- Manufacturer: Northtech
- Phase type: Three-phase
The NT-RRS80B2 is a two head heavy duty sander specifically designed for round rods. It is a heavy-duty industrial grade sander that rolls the part against the sanding belts as it is fed though the machine. Varia...
Dundee, NY
Northtech NT-RRS80B Round Rod Sander
- Manufacturer: Northtech
- Phase type: Three-phase
The NT-RRS80B is a single head heavy duty sander specifically designed for round rods. It is a heavy duty industrial grade sander that rolls the part against the sanding belt as it is fed through the machine. Var...
Dundee, NY
Northtech NT-8-1300RC 52'' Double Head Wide Belt Sander
- Manufacturer: Northtech
- Phase type: Three-phase
NT-8-1300RC WIDE BELT SANDER The NT-8-1300RC is a two-head wide belt sander that has a 51″ working width and comes standard with 52″ x 75″ belts and variable speed invisible seam feed mat. The rugged 8″ rubber ...
Dundee, NY
Northtech NT 12-1300R Wide Belt Sander
- Manufacturer: Northtech
- Phase type: Three-phase
While Northtech Wide Belt Sanders have been trusted for decades in wood shops of all sizes, the 12-series machines are designed for industrial production use. The NT-12-1300R is a single head wide belt sander wit...
Dundee, NY
SuperMax, 19-38 Drum Sander
- Manufacturer: Supermax
We’ve addressed issues common with other drum sanders by adding five features that are exclusive to our 19-38 machines. No other drum sander on the market has these features! - Simple alignment feature Just one ...
Dundee, NY
Northtec NT 12-1100RC Wide Belt Sander
- Manufacturer: Northtech
- Phase type: Three-phase
While Northtech Wide Belt Sanders have been trusted for decades in wood shops of all sizes, the 12 series machines are designed for industrial production use. The NT-12-1100RC is a two head wide belt sander with ...
Dundee, NY
Northtech NT-MBS12-2T1R1OL Moulding Brush Sander
- Manufacturer: Northtech
- Phase type: Three-phase
Machine hp: 5.5 HP. | Direct drive (motor): Sanding Heads | Voltage, frequency: 230/460 Volt 60 Hz | Phase: 3 Phase | Amp requirement: 16.5/8.25 Amps | Configuration: 2 Top 1 Left 1 Right Opposing | 1st head: 1....
Dundee, NY
Northtech NT-12-1300RRC Wide Belt Sander
- Manufacturer: Northtech
- Phase type: Three-phase
While Northtech Wide Belt Sanders have been trusted for decades in wood shops of all sizes, 12-series machines are designed for industrial production use. The NT-12-1300RRC is a three head wide belt sander with o...
Dundee, NY
Northtech NT-10-600RC 24'' Double Head Wide Belt Sander
- Manufacturer: Northtech
- Phase type: Three-phase
While Northtech Wide Belt Sanders have been trusted for decades in wood shops of all sizes, the 10 series machines are designed for industrial production use. The NT-10-610RC is a two head wide belt sander with...
Dundee, NY
Northtech NT-10-1300RC 51'' Double Head Wide Belt Sander
- Manufacturer: Northtech
- Phase type: Three-phase
While Northtech Wide Belt Sanders have been trusted for decades in wood shops of all sizes, 10 series machines are designed for industrial production use. The NT-10-1300RC is a two head wide belt sander with a ...
Dundee, NY
Northtech NT-9-900RC Double Head 37'' Wide Belt Sander
- Manufacturer: Northtech
- Phase type: Three-phase
Northtech NT-9-900RC Double Head 37'' Wide Belt Sander
Dundee, NY
Tip: Enter manufacturer, model or keyword