Used variable speed

20" CLAUSING SINGLE SPINDLE DRILL: STOCK #76296

• used

• Manufacturer: Clausing
• Model: 2287

Stock#: 76296 | Depth of throat: 10" | Spindle speeds: 150 TO 2000 RPM (VARIABLE) | Spindle travel: 61/2" | Diameter of spindle: 2-1/2" | Taper in spindle: #3 MT | Area of table: 40" X 24" | Diameter of column: ...

15" Clausing Model 16VC-1 Drill Press Variable Speed Made in USA

• used

• Manufacturer: Clausing

15" Clausing Model 16VC-1 Drill Press Variable Speed Made in USA 818. 441 - 8941

Clausing Drill Press Variable Speed Model Series 16SC With Magnetic Chuck

• used

• Manufacturer: Clausing

DP-1375VS-110 Variable Speed Drill Press

• used

Base size (in.): 27" x 19" | Column diameter (in.): 4.52" | Coolant pump motor: 1/8 hp | Drilling capacity cast iron (in.): 1-1/16" | Drilling capacity (in.): 1.25 | Drilling capacity mild steel (in.): 1-1/4" | ...

Drill Press Variable Speed - DP-1000VS

• used

Base dimensions (in.): 27" x 19" | Column diameter (in.): 3.62" | Drilling capacity cast iron (in.): 1.25" | Drilling capacity mild steel (in.): 1" | Model number: DP-1000VS | Motor (hp): 2 HP, 220V, 1 Phase | P...

JET JDP-20EVST-230, 20" EVS DRILL PRESS WITH TAPPING 230V 354225

• new

Details JET Electronic Variable Speed Drill Presses offer spindle speed rates between 65 and 2000 RPM for a wide variety of applications. Designed to permit continuous speed adjustment - even during operation. 35...

NEW ELLIS DRILL PRESS 9400 NEW ELLIS DRILL PRESS 9400 - CALL 877-528-2809 FOR LEAD TIMES

• new

• Manufacturer: Ellis

Variable speed from 0 to 1200 rpm Adjust speeds while operating in the material High torque at low rpm speeds Instantaneous reversing for tapping Tapping head is not needed Machine tap goes into ball bearing chuc...

Jet Geared Drill & Tapping Press

• used

• Manufacturer: JET
• Model: GHD-20

Equipped With: - Powerfeed - Draw Bar Table size: 9" X 42" | Ram travel: 13.5" | Quill travel: 5" | Knee travel: 14.5" | Spindle motor: 8 Speeds | Spindle speeds ( variable ): 80-2720 RPM | Weight: 2000 LBS

5/8" DURACRAFT #DP-514-12S FLOOR SINGLE SPINDLE DRILL PRESS

• used

419-269-2000 10559 Geiser Road Holland, OH 43528 Machine Information 5/8" DURACRAFT MODEL #DP-514-12S FLOOR SINGLE SPINDLE DRILL PRESS: STOCK #21134 Stock #: 21134 Duracraft Drill Press SERIAL 92976 Model DP-514-...

Klutch 17in. Floor Mount Drill Press

• used

With VIse, Technical Specifications: Motor: 120V, 60Hz, 1 1/2HP Item Number: 49385 Drilling Capacity: 1in. Swing: 17 23/32in. Taper: MT2 Spindle Speed: 600-2400RPM (Variable) Spindle Travel: 6in. Serial Number: 1...

KLUTCH 17IN. Floor Mount Drill Press

• used

With VIse, Technical Specifications: Motor: 120V, 60Hz, 1 1/2HP Item Number: 49385 Drilling Capacity: 1in. Swing: 17 23/32in. Taper: MT2 Spindle Speed: 600-2400RPM (Variable) Spindle Travel: 6in. Serial Number: 2...

ROCKWELL 15" HEAVY DUTY FLOOR MODEL DRILL PRESS, MODEL: 15-665

• used

• Manufacturer: Rockwell
• Model: 15-665

ROCKWELL / DELTA 15" HEAVY DUTY FLOOR MODEL DRILL PRESS S/N# 1504843 1PH, 115 VOLT 6" QUILL TRAVEL 1/2" CHUCK VARIABLE SPEED, 425, 600, 1,100, 2,050, 3,900 6" STROKE 6 STEP PULLY 15-1/2" TILTING TABLE #2 M.T. SPI...

KNUTH "SSB F Super" COLUMN DRILL PRESS

• new

• Manufacturer: Knuth Werkzeugmaschinen
• Model: SSB F Super

SSB 40 F Super SSB 50 F Super Working Area Drilling capacity 1.57 in 1.97 in Tapping capacity, steel M 24 M 30 Table set up area 21x17 in 23x18 in Quill stroke 7 in 8 in Manual table travel 22.44 in 20.87 in Powe...

BAILEIGH DRILL PRESS DP-15VSF

• new

• Manufacturer: Baileigh
• Model: DP-15VSF

DESCRIPTION The DP-15VSF is the ultimate woodworking drill press. This belt driven variable speed drill press has a true 1 hp motor that runs off of 110 volts, but can be wired to run on 220 volt single phase sho...

Baileigh Drill Press DP-1250VS

• new

• Manufacturer: Baileigh
• Model: DP-1250VS

Baileigh's DP-1250VS heavy duty drill press has a wide column for extra support to reduce flexing during heavy drilling sessions at maximum capacity, being 1-1/4" diameter mild steel. This machine has a powerful ...