Used variable speed

20" CLAUSING SINGLE SPINDLE DRILL: STOCK #76296

• Manufacturer: Clausing/Colchester
• Model: 2287
• Throat depth: 254 millimeter

Stock#: 76296 | Depth of throat: 10" | Spindle speeds: 150 TO 2000 RPM (VARIABLE) | Spindle travel: 61/2" | Diameter of spindle: 2-1/2" | Taper in spindle: #3 MT | Area of table: 40" X 24" | Diameter of column: ...

15" Clausing Model 16VC-1 Drill Press Variable Speed Made in USA

• Manufacturer: Clausing/Colchester

15" Clausing Model 16VC-1 Drill Press Variable Speed Made in USA 818. 441 - 8941

DP-1375VS-110 Variable Speed Drill Press

• Drilling diameter: 1.25 millimeter

Base size (in.): 27" x 19" | Column diameter (in.): 4.52" | Coolant pump motor: 1/8 hp | Drilling capacity cast iron (in.): 1-1/16" | Drilling capacity (in.): 1.25 | Drilling capacity mild steel (in.): 1-1/4" | ...

Drill Press Variable Speed - DP-1000VS

• Drilling diameter: 31.75 millimeter

Base dimensions (in.): 27" x 19" | Column diameter (in.): 3.62" | Drilling capacity cast iron (in.): 1.25" | Drilling capacity mild steel (in.): 1" | Model number: DP-1000VS | Motor (hp): 2 HP, 220V, 1 Phase | P...

JET JDP-20EVST-230, 20" EVS DRILL PRESS WITH TAPPING 230V 354225

Details JET Electronic Variable Speed Drill Presses offer spindle speed rates between 65 and 2000 RPM for a wide variety of applications. Designed to permit continuous speed adjustment - even during operation. 35...

NEW ELLIS DRILL PRESS 9400 NEW ELLIS DRILL PRESS 9400 - CALL 877-528-2809 FOR LEAD TIMES

• Manufacturer: Ellis

Variable speed from 0 to 1200 rpm Adjust speeds while operating in the material High torque at low rpm speeds Instantaneous reversing for tapping Tapping head is not needed Machine tap goes into ball bearing chuc...

Rockwell Delta 20” Drill Press

• Manufacturer: Rockwell
• Model: 70-6X0

Description Rockwell Delta 20” Drill Press, Model 70-6X0 Serial # 1757244 Asset # 16082 Specification: Drilling Capacity, In Mild Steel: 1″ Diameter Quill Taper: #3 MT Stroke of Quill: 6″ Spindle Speeds, Variable...

ROCKWELL 15" HEAVY DUTY FLOOR MODEL DRILL PRESS, MODEL: 15-665

• Manufacturer: Rockwell
• Model: 15-665

ROCKWELL / DELTA 15" HEAVY DUTY FLOOR MODEL DRILL PRESS S/N# 1504843 1PH, 115 VOLT 6" QUILL TRAVEL 1/2" CHUCK VARIABLE SPEED, 425, 600, 1,100, 2,050, 3,900 6" STROKE 6 STEP PULLY 15-1/2" TILTING TABLE #2 M.T. SPI...

Delta JDP-20MF

• Manufacturer: Delta

Description Jet 20” Drill Press, Model JDP-20MF Serial # 354170 Asset # 16330 Base Work Table (In.) 13 x 8-1/2 Column Diameter (In.) 3-3/8 Distance Column to Spindle (In.) 10 Drilling Capacity Cast Iron (In.) 1 D...

KNUTH "SSB F Super" COLUMN DRILL PRESS

• Manufacturer: Knuth Werkzeugmaschinen
• Model: SSB F Super
• Throat depth: 330.2 millimeter
• Drilling diameter: 39.878 millimeter

SSB 40 F Super SSB 50 F Super Working Area Drilling capacity 1.57 in 1.97 in Tapping capacity, steel M 24 M 30 Table set up area 21x17 in 23x18 in Quill stroke 7 in 8 in Manual table travel 22.44 in 20.87 in Powe...

BAILEIGH DRILL PRESS DP-15VSF

• Manufacturer: Baileigh
• Model: DP-15VSF
• Drilling diameter: 15,875 millimeter

DESCRIPTION The DP-15VSF is the ultimate woodworking drill press. This belt driven variable speed drill press has a true 1 hp motor that runs off of 110 volts, but can be wired to run on 220 volt single phase sho...

Baileigh Drill Press DP-1250VS

• Manufacturer: Baileigh
• Model: DP-1250VS
• Drilling diameter: 38.099999999999994 millimeter

Baileigh's DP-1250VS heavy duty drill press has a wide column for extra support to reduce flexing during heavy drilling sessions at maximum capacity, being 1-1/4" diameter mild steel. This machine has a powerful ...

ERLO Série Z

• Manufacturer: Erlo
• Drilling diameter: 40 millimeter

Reference DMO : Erlo column drilling machine Series Z 35-40 : Manual or automatic feed(s) with mechanical clutch (A) or electromagnetic clutch (B) Movable table and fixed head Cast-iron head, base and column Stan...

ERLO Série BC

• Manufacturer: Erlo
• Drilling diameter: 50 millimeter

DMO Reference: Erlo BC 50 Series Column Drill: It features: Automatic feed with electromagnetic clutch Movable table and fixed head Cast iron head, base, and column Standard equipment: Combination of hardened and...

ERLO AZ35

• Manufacturer: Erlo
• Drilling diameter: 35 millimeter

Erlo type AZ35 drill press: It features : Manual feed Mobile table Fixed head Cast-iron head, base and column Standard equipment : Hardened and ground steel gears T-slot table Ladder and adjustable depth stop Lig...