Used variable speed

3 HP 42" X 9" CLEVELAND VERTICAL RAM TYPE MILL: STOCK #73103
- used
- Manufacturer: Cleveland
Stock#: 73103 | Area of table: 42" X 9" | Spindle speeds (variable): 60 TO 4200 RPM | Longitudinal travel: 30" | Vertical knee travel: 12-3/4" | Cross travel: 17" | Quill travel: 4-7/8" | Ram travel: 17-3/4" | D...
Holland, OH
2 HP JET VERTICAL RAM TYPE MILL: STOCK #78346
- used
- Manufacturer: JET
- Model: JTM-4VS
LONGTUDINAL & CROSS POWER FEEDS ,, YES 2 AXIS DIGITAL READOUTS .. YES
Holland, OH
3 HP CHEVALIER FALCON VERTICAL RAM TYPE MILL: STOCK #78270
- used
- Manufacturer: Falcon RME
Stock#: 78270 | Area of table: 50" X 10" | Spindle speeds, variable: 60 TO 4500 RPM | Longitudinal table travel: 30-3/4" | Longitudinal power feed: YES | Cross travel: 15-3/4" | Cross power feed: YES | Vertical ...
Holland, OH
3 HP JET MODEL JTM-4VS VERTICAL RAM TYPE MILL: STOCK #80228
- used
- Manufacturer: JET
- Model: JTM-4VS
Stock#: 80228 | Area of table: 49" X 9" | Spindle speeds (variable): 60 TO 4200 RPM | Spindle feeds: 0.003, 0.006, 0.0015 IPR | Longitudinal table travel: 34" | Cross travel: 12" | Vertical travel of knee: 15" |...
Holland, OH
SOUTHWEST INDUSTRIS MODEL TRAK DPM CNC MILL: STOCK #75102
- used
- Manufacturer: TRAK
- Model: DPM
- Spindle Taper: 40 N.S.T.
- Control: TRAK AGE 3
Stock#: 75102 | Table area (t-slotted): 50" X 10" | Longitudinal table travel: 31" | Cross table travel: 17" | Head travel: 31 | Quill travel: 5" | Quill diameter: 3-3/8" | Spindle speeds (variable): 70 TO 4200 ...
Holland, OH
1995 SOUTHWESTERN INDUSTRIES TRAK TRM 2--AXIS CNC BED MILL
- used
- Manufacturer: TRAK
- Model: TRM
- Spindle Taper: 40 NST/NMTBA
SOUTHWESTERN INDUSTRIES TRAK TRM 2--AXIS CNC BED MILL New 1995 Motor Driven with 3 HP, 3-Phase, 60 Cycle, AC Motor & Controls EQUIPPED WITH: Trak A. G. E. 3 CNC Controls, Power Draw Bar, Power Feed For Elevation,...
Bannockburn, IL
DOALL MODEL # FU-205 VERTICAL/HORIZONTAL MILL: STOCK #80055
- used
- Manufacturer: DoAll
Stock#: 80055 | Area of table: 53-3/4" X 12" | Spindle speeds: 40 TO 1500 RPM (VARIABLE) | Power longitudinal feed: 1/2 TO 21 IPM | Power cross feed: 1/2 TO 21 IPM | Longitudinal travel: 32" | Cross travel: 15-3...
Holland, OH
1980 S.N.K. RB-2N
- used
- Manufacturer: S.N.K.
- Spindle Taper: 50
- Control: New Fanuc or optional customer choice CNC
Dual pallet with automatic pallet changer, main table size 48 x 91 inch (1,220 x 2,310 mm), distance from spindle to main table top 51 inches (1,300mm), spindle quill diameter 7.25 inches (185 mm), new servo moto...
Washington, PA
MILLPORT MODEL #3VH VERTICAL RAM TYPE MILL: STOCK #74637
- used
- Manufacturer: Millport
- Model: 3VH
- Spindle Taper: R-8
SPINDLE SPEEDS (VARIABLE) .. 60 TO 4250 RPM LONGITUDINAL TABLE TRAVEL .. 30"
Holland, OH
1989 Traub Heckert CW800
- used
- Manufacturer: Heckert
- Control: New Siemens or Fanuc CNC
Spindle torque 1000 nm., Feed force 7,800 lbs. Maximum, new servo motors, servo drives, spindle drive, and encoders, all new wiring
Washington, PA
1988 Excello 508 W.C.
- used
- Manufacturer: Ex-Cell-O
- Spindle Taper: 50 NMTBA
- Control: New Siemens or Fanuc CNC
New servo motors, servo drives, and spindle drive Ways: Hardened Ways With Roller Packs | Power: 3 PH / 60Hz / 440V | Weight: 78000 lbs 35455 kg | Control: New Siemens or Fanuc CNC | Way covers: Metal Telescopic ...
Washington, PA
1989 Traub Heckert CW800
- used
- Manufacturer: Heckert
- Control: New Siemens or Fanuc CNC
Spindle torque 1000 nm., Feed force 7,800 lbs. Maximum, new servo motors, servo drives, spindle drive, and encoders, all new wiring
Washington, PA
Machinery LMV-49-DVS-MP-2
- new
This is a simple, easy to use 2 axes CNC control vertical mill. Ball screws and servo drives are installed for longitudinal and cross travel. 3 axes Digital Readout System are installed on the table, saddle and q...
Torrance, CA
Machinery LMV-50-MP-3
- new
This is a simple, easy to use3 axes CNC control vertical mill. Ball screws and servo drives are installed for longitudinal and cross travel. 3 axes Digital Readout System are installed on the table, saddle and qu...
Torrance, CA
Machinery TMV-1-MP-3
- new
This is a simple, easy to use 3 axes CNC control vertical mill. Ball screws and servo drives are installed for longitudinal and cross travel. 3 axes Digital Readout System are installed on the table, saddle and q...
Torrance, CA