Used Processing in Hamburg, Germany

2004 GMM GIGA 3500-
- used
- Manufacturer: GMM
- Model: Giga 3500
Block saw Maximum saw blade: 3500 mm Cutting stroke of the X-axis of the saw: 4,000 mm Max. stroke Y-axis carriage: 2,800 mm Max. stroke Z-axis: 2,200 mm Size of the carriage: 2,200x3,000 mm Maximum cutting thick...
Hamburg, Germany
1998 SIMEC NT 2/50-
- used
- Manufacturer: Simec
Multi-blade block cutter Vertical saw blade diameter mm. 1600 Horizontal saw blade diameter mm. 400 Motor vertical saw Kw 200 Motor horizontal saw Kw 15 Number of vertical cutting discs 52 The machine was fully m...
Hamburg, Germany
1995 Breton LEVIBRETON KFG 200/0/10-
- used
- Manufacturer: Breton
Granite polishing line 10 grinding/polishing heads Max. diameter of the slabs: 600 mm Working width: 2,000 mm 9 heads for Frankfurt Alignment from left to right Overall dimensions: length 10.4 meters, width 3 met...
Hamburg, Germany
2010 Breton Smart cut NC 800-
- used
- Manufacturer: Breton
- Model: Smart Cut
CNC machining center with 5-axis head Disc diameter 800 MAX. length mm 3500 MAX. width mm 2000 MAX. thickness mm 240 Machine configuration X-axis travel mm 3800 Y-axis travel mm 2800 Z-axis travel mm 550 Axis rot...
Hamburg, Germany
2009 MEC C-400-90T-
- used
- Manufacturer: MEC
Stone splitting machine 90 tons never used. Includes conveyor belt length 3 meters. Length of the splitting knife: 320 mm Splitting height: 400 mm Splitting force: 90 tons Maximum working pressure: 315 bar Upper ...
Hamburg, Germany
2000 CMPI ANTARES 2D+8A/800-
- used
- Manufacturer: CMPI
- Model: Antares
Calibration and polishing machine for marble 2 calibration heads 8 polishing heads Max. working width: 800 mm Max. working thickness: 100 mm Min. working thickness: 10 mm Voltage: V/Hz 400/50 Calibration spindle ...
Hamburg, Germany
2013 GMM ZEDA 38-
- refurbished
- Manufacturer: GMM
- Model: Zeda
CNC 5-Axis Bridge Saw - Refurbished with 6 months warranty. Installation and training can be provided at extra cost. Number 5 interpolated axes X – Y – Z – R – W Rotating head 0°÷370° Tilt head -15°÷ +105° Max. a...
Hamburg, Germany
2006 PELLEGRINI POLYWIRE 5.9 - Nr.1
- used
- Manufacturer: Pellegrini
- Model: Polywire
Multiwire with 9 diamond wires Rated power: 37/50 kW Voltage: 380 V – 50 Hz Cutting dimensions: 2,100 mm (height) x 3,500 mm (length) Wire length: 24,500/25,400 mm Wire thickness: max. 8.3 mm Water consumption: 7...
Hamburg, Germany
2019 PTM Pieropan Telaio-
- used
- Manufacturer: Pieropan
Special gang saw Usable cutting length: 3500 mm Usable cutting height: 2200 mm Usable cutting width: 300 mm Maximum number of saw blades: No. 4 (or No. 5 with tension reduced by 20% for a total of 36 tons) Saw bl...
Hamburg, Germany
2022 Fravizel Lynx + Halley MFCR 55
- used
- Manufacturer: Fravizel
Mobile diamond wire saw on crawler undercarriage Built in 2022, start up in 2023 55 KW motor The upper rails are used for cutting blocks or walls. The wire saw moves along the approximately 8,000 mm long green un...
Hamburg, Germany
2012 R & R-Technik Volumen 20.000 Bm³/h
- used
- Manufacturer: R & R-Technik
Large dust extraction system for a dry screen drum System without the drum, which is visible in the pictures. Exhaust air filter with an air volume of 20,000 Bm³/h Dust properties: dry, fine Raw gas dust content:...
Hamburg, Germany
2009 Omag Blade NC 700-
- used
- Manufacturer: Omag
CNC bridge saw with 5-axis head 1st bridge: 5-axis saw 2nd bridge: Vacuum suction cup for unloading Saw blade diameter 700 mm Y-axis approx. 15,000 mm X-axis 4,000 mm Z-axis 300 mm Underfloor saw NUM CNC control ...
Hamburg, Germany
2013 Montresor Lola 1000 – 3 MOTION
- used
- Manufacturer: Montresor
- Model: Lola 1000
Edge polishing machine 3 Motion System Direction of rotation: inlet right, outlet left 8 face grinding supports, each 1.8 kW Conveyor belt with adjustable feed speed 300-3000 mm/min. Motorized height adjustment o...
Hamburg, Germany
2005 BRETON LEVIBRETON KFG 3000-
- used
- Manufacturer: Breton
Grinding line for polishing marble slabs Slab trolley Mod. 3TR/E Motorized rotating fifth wheel Mod. JOT:'RG 50 Automatic loader Plod. JOTL/S'20/35 Special conveyor for 1st fold niod. IRMFJP/20/L, 35/ A Roller co...
Hamburg, Germany
FMECCANICA FCG 620/900-
- used
- Manufacturer: FMeccanica
Calibration machine for calibrating marble, granite, natural stone and ceramic strips Robust calibration spindles in metal construction with ground chrome-plated tube Calibration plate Ø 620/900 mm Electric motor...
Hamburg, Germany