Used Processing in Schleswig-Holstein, Germany

Mueller GmbH Stainless Drum Thermobody resistant to pressure

• Manufacturer: Mueller

Volume: 45 Liter Inner height: 55cm Inner diameter: 32cm Outer height: 68cm Outer Diameter: 34cm max. Pressure: 3,6 bar Temp range: -10° up to +150°C

EVOQUA Ultra Clear™ TWF EDI UV UF TM Water Purifier for ASTM type 1, CLSI type 1 und ISO 3696 type 1 with TOC Monitor

• Manufacturer: EDI

EVOQUA Ultra Clear™ TWF EDI UV UF TM Water Purifier for ASTM type 1, CLSI type 1 und ISO 3696 type 1 with TOC Monitor

Seralpur Delta UV/UF Water Purifier

• Manufacturer: Delta

Used Seralpur Delta UV/UF Water Purifier Shippingtime: immediately (abroad may vary) | Stock: 1 pieces

Water Deionizer with 1.4571 steel, 40 liters mixed bed resin, 1800l/h

• Manufacturer: Resina

Water Deionizer with 1.4571 steel, 40 liters mixed bed resin, 1800l/h NEW

Vacuubrand MZ2C NT AK + EK Chemistry vacuum system MZ 2C NT +AK+EK

• Manufacturer: Vacuubrand

New Vacuubrand MZ2C NT AK + EK Chemistry vacuum system MZ 2C NT +AK+EK

IKA S25KV-18G Dispersing Tool for Vacuum use NEW

IKA S25KV-18G Dispersing Tool for Vacuum use NEW Shippingtime: immediately (abroad may vary) | Stock: 2 pieces

IKA Dispersing tool S 10 N - 10 G

IKA Dispersing tool S 10 N - 10 G Volume range (H2O) min. 0001 l Volume range (H2O) max. 0.1 l Stator diameter 10 mm Rotor diameter of 7.6 mm Gap width between the stator and rotor 0.2 mm Peripheral speed max. 11...

BOHLE HS 200 Lifting device

• Manufacturer: LB Bohle

• Permissible load 200 kg• Lifting mast with floor bearing • Overall height 3,050 mm• Lifting height centre of mandrel to floor approx. 2.50 m• Load reversing gear with mandrel holder• Mandrel holder diam. 35 mm,...

TRANSVER 2820 90° curved conveyor

• Manufacturer: Transver

• Belt width 315 mm• Belt, white• Radius of belt inside 135 mm / outside 450 mm• Height of belt approx. 820 mm, adjustable• Drive SEW SF 40; 0.37 kW; 240/400V; variable speed gearbox 1:11.88

TOMMY NIELSEN UNIVERSAL 300 FS Deep-drawing/sealing machine

• Manufacturer: Tommy Gate

• Semi-automatic machine with rotary table• Max. tool dimensions 200 x 400 mm• Max. tool height 120 mm• Max. output 16 cycles/min• Moulding and sealing possible with one tool• Temperature can be set differently f...

HÖFLIGER+KARG/HVS CARTONETTA Cartoner (tube)

• Manufacturer: Höfliger+Karg/HVS

• cf1Indexed machine for double-sided offset tuck-in flap• Format range W 15 - 80, H 15 - 60, L 50 - 180 mm• Output max. 50 packs/min• Tube infeed conveyor from tube filler to cartoner, ascending, 90° angle, buil...

FALLER QUIKPAC Folding card press

• Manufacturer: Faller

• Ideal for the fast packaging of small quantities of e.g. tablets• Blisters are glued in seconds in just a few steps• The contact pressure can be finely adjusted via a scale• Format changes are completed within ...

BOHLE EFB 1350 Conveyor belt for tablets

• Manufacturer: LB Bohle

• Conveyor belt length 1,350 mm• Conveyor belt width 100 mm• Web spacing 30 mm, web height 5 mm• Conveyor belt made of white plastic, as good as new• Adjustable inclination • 1 speed• Dust compartment• Without in...

MULTIVAC MR143 Labeller tamper evident top flap

• Manufacturer: Multivac

• Semi-automatic table-top device with manual object feed and foot switch• For attaching a security label to the lid flap• Multivac MR143 label dispenser, height and cross-adjustable• Label width max. 100 mm• Dia...