Used Processing in Ontario, Canada

Stainless Cartridge Filter

-Shipping dimensions: length 12" x width 15" x height 41" -Input / output - 2" -Drain - 1"

Pneumatic Clip on Mixer

-Clip on -Length of mixer shaft: 76" -Prop: 316 stainless steel -Width of prop: 6"

Drag conveyor

-Total shipping dimensions L- 69” W- 48” H- 55” -Inlet- 6.5” Outlet - 4” Access hatch -16.5”x 20” -Motor info HP- 7.5hp Volts - 575v RPM- 1750 PH- 3 Sew Eurodrive Ratio - 86.34:1

Cone Bottom Carbon Steel Hopper Tank

-Diameter: 9ft -Top opening: 36" x 36" -Two bottom openings: 20" x 20" -Length of legs: 73" or 6.1 ft -Attached to the hopper bottom is a Vibco 250 -Monitor: -Model: KA -Power: 115 V~50/60 Hz -UL listed -Total di...

Read co. Continuous Mixer

• Manufacturer: Read

-master motor:1/3 HP -1 Phase -.4 AMPS -1725 RPM -115 v -z blades

Hibon blower

• Manufacturer: Hibon

-Model 2051-HCZ -Serial 5V015-63 -230/460 volt @ 1750 rpm -3 IN STOCK

590 Litres Closed top plastic tank

-Closed top with manhole opening -Flat bottom -Measurements on side in us gallons -2"nipple on the side at the bottom -1" nipple on the side at the top 53.5" tall -30" diameter -130 imp gall

Strong Hold SS Storage Cabinet

CATEGORY: Miss -60" wide x 30" deep -peak top -82" high at front, 92" high at back -2 sections (24" on left, 36" on right) -(1) sliding SS drawer -(1) lower shelf -(2) 110 volt outlets on back -(4) adjustable hei...

Shaker table Riser

-Shipping dimensions: Height 10" X Width 58 1/2" X Length 69 1/2" -Side shoot diameter: 8" -3 in stock -50" diameter

Fuji Ring Compressor

• Manufacturer: Fuji Electric

-Shipping dimensions: length 12" x width 12" x height "12 -Input/Output: 1.5" -3 phase -2 Poles -50/60 Hz -575 Volts -Output Hp: 1.1 -Max Amps 1.3 -Max H2O: 54.5 -Max CFM 98

Day Ribbon Blender

-Sew-eurodrive motor: 330/575 V, 7.50 HP, 1720 RPM, -5/16 jacket thickness -3/8 shell thickness -Walls have an extension that can be taken off -Shipping dimensions: 48” width x 120” length x 66” height with base ...

Clamp on Mixer with Weg Motor

• Manufacturer: WEG

-0.750" shaft diameter needed -Phase 3 -HP: 0.33 -Volts: 575 -RPM: 1730 -Amps: 0.44

1,900 Litres stainless steel tank with mixer

• Manufacturer: Alfa-Laval

-500 US Gallon -ALFA-LAVAL Jacketed Stainless Steel Mixing Vessel -With Overhead Prop Mixer -80 psi. -Max steam pressure, plate reads 100psi @300F Max W Pressure -20f @100psi Min Des. -Ser. 14972.1 -Made in Canad...

1,100 Litres Sanitary Variable Capacity Stainless-steel Tank (VCT)

-Lid inlet : 1-3/8” -Bottom outlet : 1-3/8” -Valve mid way : 3/8” -Inside dimensions: 45” deep by 45” inside diameter -3 in stock -Shipping dimensions: -Height: 61”-Diameter: 51” -Weight: 150 pounds

454 Litres tank with mixer

• Manufacturer: Lightnin

-40" tall x 31" diameter -Jacketed stainless steel -Lightnin mixer on top -Max 50 PSI at 350 -3 legs 16" -Manhole top -3" nipple at the bottom