Used Processing in Canada

Strong Hold SS Storage Cabinet

CATEGORY: Miss -60" wide x 30" deep -peak top -82" high at front, 92" high at back -2 sections (24" on left, 36" on right) -(1) sliding SS drawer -(1) lower shelf -(2) 110 volt outlets on back -(4) adjustable hei...

Shaker table Riser

-Shipping dimensions: Height 10" X Width 58 1/2" X Length 69 1/2" -Side shoot diameter: 8" -3 in stock -50" diameter

Fuji Ring Compressor

• Manufacturer: Fuji Electric

-Shipping dimensions: length 12" x width 12" x height "12 -Input/Output: 1.5" -3 phase -2 Poles -50/60 Hz -575 Volts -Output Hp: 1.1 -Max Amps 1.3 -Max H2O: 54.5 -Max CFM 98

Day Ribbon Blender

-Sew-eurodrive motor: 330/575 V, 7.50 HP, 1720 RPM, -5/16 jacket thickness -3/8 shell thickness -Walls have an extension that can be taken off -Shipping dimensions: 48” width x 120” length x 66” height with base ...

Clamp on Mixer with Weg Motor

• Manufacturer: WEG

-0.750" shaft diameter needed -Phase 3 -HP: 0.33 -Volts: 575 -RPM: 1730 -Amps: 0.44

1,900 Litres stainless steel tank with mixer

• Manufacturer: Alfa-Laval

-500 US Gallon -ALFA-LAVAL Jacketed Stainless Steel Mixing Vessel -With Overhead Prop Mixer -80 psi. -Max steam pressure, plate reads 100psi @300F Max W Pressure -20f @100psi Min Des. -Ser. 14972.1 -Made in Canad...

Tank Mixer

-Sew-Eurodrive Motor: -1760/244 RPM -460V -with shaft and two mixer heads

Refrigerant heat exchanger CB30-24

• Manufacturer: Alfa lava

-Shipping dimensions: Height 4" x Width 4 1/2" x Length 12 1/2" -Type: CB30-24 -Manufacturing date: 2012 08 15

Kady Disperser

• Manufacturer: Kady

-MFG: KADY -MODEL: 25 T -9'' ROTOR/STATOR MILLING HEAD -BUILT IN OIL RESERVOIR -MOTOR: 575 VOLT

Immersion mixer blender

-Weg Motor: 575V, 3phase, - explosion proof - 1740 RPM, 5.0 HP, 5.60 AMPS -40" shaft

Donaldson air Filter Unit DWS6 7.5 HP

• Manufacturer: Donaldson / Torit / DCE

-Shipping: 54” length x 50” width x 102” height -Electrical: 208-460/60/3 -Motor HP: 7.5 HP -Filter part number: P191889 -Model: Dws6

Donaldson air Filter Unit DWS6

• Manufacturer: Donaldson / Torit / DCE

-Shipping: 54” length x 50” width x 102” height -Model: Dws6 -208-460/60/3 Volts -Filter part number: P191889

970 Litres fibreglass tank with manhole on top

-3 stationary legs -Dome bottom -Flat lid with manhole -215 imp

Clamp Down Bag Filter

-Shipping dimensions: length 42" x width 15" x height 13" -Inlet / outlet - 2.5"

Twister T4 Trimmer

• Manufacturer: Twister

-Dimensions: 25" length x 15" width x 16.5" height -115 V -2A current draw -Blade motor: 200W/0.25 HP -Tumbler Motor: 6w/1/125 HP -5 inch discharge -speed control

Park Industries Yukon Bridge Saw

• Manufacturer: Park Industries
• Model: Yukon

Good condition Park Industries Yukon Bridge Saws available between 2000 and 2018 years. Located in USA and other countries. Click request price for more information.