Used Machine Tools in Saxony, Germany

1987 TOS - KURIM DU 250 AS

• Manufacturer: TOS Kuřim

Application: For auxiliary work e.g. scribing of graduations. -dividing attachment with chuck Ø 125 in 360° pitch circle -clamping takes place via grid with index -pitch circle 24 -chuck: Ø 125mm, with revolving ...

angle table nicht bekannt

• Manufacturer: nicht bekannt

Angle extension table - machine table - machine clamping table with 33 x clamping holes M24 vertical mounting side: W x H: 800 x 450mm with 4 clamping grooves Ø 30 x 75mm

1985 WMW 3880x1390

• Manufacturer: WMW

distance of t-slots=250mm T-slot size: a=28mm b=50mm c=24mm h=52mm

WMW SP 4750x1850x200

• Manufacturer: WMW

steel plate are available for sale. T-slots according to DIN 650 a=42mm; b=74mm; h=65mm distance edge to 1st T-slot = 150mm distance T-slot to T-slot=310mm

1988 Krups AP 4000x2000x460

• Manufacturer: Krups

2 pieces cast steel plates for sale free. T-slots according to DIN 650 a=40; h=56; b=74; c=28mm; center distance of T-slots = 250 mm The plates are equipped for lateral fixing.

WMW AP 510x270x65

• Manufacturer: WMW

very good steel plate for sale free, packed in oiled paper and foil Surface ground Ra 0.8 according to drawing T-slots according to DIN 650: a=36; h=65; b=60 c=26mm, chamfered approx. 1.5mm Distance from edge: 10...

WMW ALU 4200x2000

• Manufacturer: WMW

Aluminum plate with 800 clamping holes, M8; countersunk Ø 11,5 x 15mm with 4 clamping holes, M24 The plate is placed on a wooden support frame.

WMW ALU 4000x1700

• Manufacturer: WMW

Cast aluminum plate, finished This plate can be used for assembly work on both sides. Numerous clamping holes (M8) evenly arranged on the plate. By means of lift/chassis (welded/screwed) the aluminum plate stands...

STOLLE AP 5500x2150x340

• Manufacturer: STOLLE

Material cast steel Milled, finished surface T-slots according to DIN 650: a=28; h=46; b=48; c=21mm Center distance 150 / 230 mm

bolster plate AP 5500x1890x380

3 clamping plates (price per plate) Weights: No. 1 = 8000kg; No. 2 = 9000kg; No.3 = 8500kg Material: Cast iron T-slots according to DIN 650 Slots lengthwise Number 6 Size a=36mm,h=64mm,b=60mm,c=25mm Center distan...

bolster plate AP 2000 x 1500 (Nr.1 - Nr.6)

There are 6 of these clamping plates for sale. (price per piece) Material cast steel/profile casting T-slots according to DIN 650: a=43; h=105; b=76; c=50 mm; center distance 375 mm 4x passage holes Ø 90 mm 10x f...

PST 1,3

• Manufacturer: PST

3 chip containers (blue) type PST; capacity = 0.6 m³ Tipping angle approx. 45° for emptying Base frame size 1000mm x 1000mm x 180mm Sheet metal construction 8 mm thick 4 eyebolts for crane lifting

VIRAX thread cutting stock

Pipe threading stock, Threading stock VIRAX Type 62 in a plastic case, one hinge is broken used, tested!

R. HOFHEINZ magnetic coupling

Magnetic coupling R. HOFHEINZ & Co. 24 V DC New! Clutch housing: Ø 133 mm | Hollow shaft diameter: Ø 32 mm | Wavelength: 52 mm | Groove width: 10 mm | Dimensions ( magnetic coupling ): 133 x 133 x 64 mm | Dimensi...

ORTLINGHAUS magnetic coupling

Magnetic clutch ORTLINGHAUS 5 clutch discs 24 V DC New!