Used Machine Tools in Saxony, Germany

FEIN tin snips

• Manufacturer: Fein

Sheet metal shears, high-frequency sheet metal shears, high-frequency tool, high-frequency machines FEIN QSz 838 0.24 kW 1850 strokes/min 265 V 3AC 200 Hz approx. 3.5 m connection cable used, tested!

90,6"L x 31,5"W x 67"H (230L x 80W x 170H cm)

• Manufacturer: WMW

Machine vice WMW on table with graduation 360° rotatable used, tested !

WMW twist drill

• Manufacturer: WMW

Twist drills WMW, WERKÖ Ø 77.0 HSS New ! Diameter: Ø 77.0 mm | Cutting angle: 118° | Cutting fabric: HSS | Morse taper: MK6 | Overall length: 514 mm | A-measure: 229 mm | Span length: 270 mm | Dimensions ( packag...

WMW twist drill

• Manufacturer: WMW

16 Ga. X 4' Wysong 1652 Diameter: HSS | Cutting angle: 118° | Morse taper: MK6 | Overall length: 510 mm | A-measure: 290 mm | Span length: 260 mm | Dimensions ( packaging ): 530 x 85 x 85 mm

WMW twist drill

• Manufacturer: WMW

Twist drills WMW, WERKÖ Ø 80,0 HSS New ! Diameter: Ø 80.0 mm | Cutting angle: 118° | Dimensiones de envío: HSS | Morse taper: MK6 | Overall length: 506 mm | A-measure: 280 mm | Span length: 255 mm | Dimensions ( ...

WMW twist drill

• Manufacturer: WMW

Twist drills WMW, WERKÖ Ø 58,0 HSS New ! Diameter: Ø 58.0 mm | Cutting angle: 118° | Cutting fabric: HSS | Morse taper: MK5 | Overall length: 426 mm | A-measure: 266 mm | Span length: 235 mm | Dimensions ( packag...

GARANT shrink lining set

• Manufacturer: Garant

Shrink fit chuck set, shrink fit chuck GARANT 302325 SK 40 used !

WMW SP 5040x2230x460

• Manufacturer: WMW

Machine table can be used as clamping plate. - material - cast steel - clamping surface 4100 x 2230mm - outlet part lateral (at the side) = W: 2110 x L: 1040mm T-slots according to DIN 650 - b=54.0; c=21.0; h=55....

GÜHRING sealing plug

• Manufacturer: Guhring

Sealing plugs, 6 pieces GÜHRING GM300 4985 63.000 16136705 used, tested !

1994 WMW 620x160

• Manufacturer: WMW

4 jaws faceplate flange intake/diameter : passage drill hole 160 mm flange diameter 197mm hole circle 235mm jaws are single guided with chuck key The given info are approx. values!

bolster plate AP 2500x1250x100 (Nr.1-2)

Cast steel The plates are machined before the T-slot with 75mmx60mm(recessed) Table surface 2530mm X 1245 mm Longitudinal slot: Number: 5 Size:a=32, h=53, b=54, c=23mm Center distance 250mm 2 slots Chamfered 8 th...

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck WMW DH 200 x 3 ( DH200x3 ) TGL 30-2333 centering Ø: 107 / 103 mm, depth: 17 mm ( conical ) used, tested !

WMW Bezel

• Manufacturer: WMW

Bezel, lunette, setting stem, fixed WMW used, tested !

DEUBLIN Rotating union

• Manufacturer: Union

Rotary feedthrough, inlet DEUBLIN DD RTR FLG 2620-500-252 Like new!

WMW bearing pedestal

• Manufacturer: WMW

Bearing block, counter bearing for milling spindle WMW Ø 55 mm x 60 mm Distance spindle center - upper edge of dovetail: 60 mm dovetail guide: 219 / 192 mm, height: 21 mm, width: 75 mm used, tested !